Motorcycle Parts for Bultaco

Found this in my barn. It is from 1970 or 1971. It is a factory Bultaco engine pressure test tool. It fits all models of Bultacos except the late model 360 engine. Was used when the machine was hard to start, would not idle well or not at all, and tended to coast when the throttle was shut.

<p dir="ltr">Bultaco Frontera Motor Engine Bottom End Cases. Condition is Used.comes with everything shown in the photo </p>

1 Bultaco Cap - Black Cap, Pursang Red Thumbs up~~ Fully Embroidered, very comfortable. Pictured here is my Father, Larry Bergquist, on his Pursang and Bandit. I hope you enjoy your Bultaco Hat should you decide to pick one up.

Cycle News produced these hats for promotional/give-away purposes. It is a light duty, non adjustable hat with a cardboard bill. THIS IS AN ORIGINAL, PERIOD CORRECT CYCLE NEWS HAT, NOT A REPRODUCTION.

Includes: GREAT CONDITION BULTACO SPARES! WHAT YOU SEE, IS WHAT IS INCLUDED. Condition: GOOD USABLE CONDITION. It is the sole responsibility of the end user to ensure compliance with Federal, State and Local laws when using these products.

1970-1972 Bultaco Sherpa "S" 125cc Model 63 MK2 Front Hub and Brake Assembly. I'm not sure but I think these rims can be repaired. At any rate you are buying the hub and brake assy. The cracked rim is free.

The holder has a removable, thick magnifying lens. This is a new watch holder with light wear from years of storage and handling. THIS IS AN ORIGINAL, PERIOD CORRECT WATCH HOLDER, NOT A REPRODUCTION.

Includes: GREAT CONDITION BULTACO SPARES! WHAT YOU SEE, IS WHAT IS INCLUDED. None of which are free. It is the sole responsibility of the end user to ensure compliance with Federal, State and Local laws when using these products.

1970-1972 Bultaco Sherpa "S" 125cc Model 63 MK2 Exhaust Pipe. Good solid usable shape.

PURSANG 112 .

Bultaco Seat. 1970-1972 Sherpa "S" 125cc Model 63 MK2. It's been reupholstered. Nice Seat.

1970-1972 Bultaco Sherpa "S" 125cc Model 63 MK2 Engine Cylinder with one broken fin. The cylinder walls look decent with no gouges.

<p dir="ltr">Bultaco misc lot of parts NOS. Condition is New. Fit various models. Includes piston rings and cables.. Please email me with any questions before bidding.</p>

Original Bultaco parts are like hens teeth.

CZ Jawa Maico Bultaco Husqvarna. Motorcycles listed in the title may or may not be correct.

They are original parts from back in the 70's. Photos show both sides of the bags.

The rear fender is discolored from the sun (you can see in the last picture) but the Front Fender is pretty decent. It has the Bultaco fender mounts.

<p dir="ltr">BULTACO frontera ORIGINAL FIBERGLASS AIRBOX & parts. Condition is Used.all the parts in the first photo are included.air box is good just needs to be cleaned up .the rubber piece is nice and soft.the spring piece looks good.the rest is garbage but i will invlude if for dimension purposes </p>

Here is a good exhaust pipe off a model 215 1979 Bultaco 370 Frontera. This also fits a '78 m207 and '79 m220 370 Pursang.

Interior pouch zipper is also in excellent working condition. Belt and buckle in like new usable condition. Silver Bultaco logo is bright and shiny. Not for waist sizes over 36" What you see is what you get.

Looks to be in nice shape, clean up and bolt on.

Up for sale is a crankshaft removed from a Matador MK4 that has light wear and a couple paint/epoxy markings on the rod but it is in good shape overall. The outer bearings need to be replaced but the inner rod bearing spins smoothly with no excess play and seems to be usable.

Condition is Used.

Condition is Used.

Bultaco cylinder removed form a model 49 Sherpa T 250. It is stamped 27 along the top. It will need at least a good honing before using and may need to be bored to the next size up. Sold as is.

THIS IS A PERIOD CORRECT DECAL STICKER, NOT A REPRODUCTION.

TESTED AND WORKING COIL OFF OF A 1970'S BULTACO APLINA 250. & Parkline Pies & Preserves.

1974 BULTACO ALPINA 350. ALUMINUM REAR FENDER. MOTOR NUMBER: JM-13800439.

<p>Solid. bultaco pursang Tank. Condition is Used. Shipped with USPS Parcel Select Ground.</p>

Good condition, paint has some cracking, fiberglass good, fuel line spouts and mount holes good, with petcock and cap.

Bultaco Matador 200 250 model 4 engine cases. Has a piece broken off at the bottom of the magneto area. All parts need to be cleaned up and rebuilt. Kick start shaft has been welded on the end and may need to be replaced.

Here is the gas tank off a 1971 Bultaco El Bandido model 50.

Bultaco Pursang MK8 200 Model 134 engine case. Cases is dirty but appears to be solid. Sold as is.

Includes: BULTACO ALPINA M116 CYLINDER HEAD. Will fit: BULTACO 350cc specifically m116. Used, older than I am! Though ready to clean up and install on your bike. OEM from Spain, no repop. I have not SCRUBBED, buffed or spent hours cleaning every crevis.

Bultaco front wheel hub. Hub needs to be rebuilt. Sold as is.

Used, older than I am! Though ready to clean up and install on your bike. OEM from Spain, no repop. I have not SCRUBBED, buffed or spent hours cleaning every crevis. Your item will arrive with dirt ON IT.

When we label a part being the Left Part. Doors, fenders, hoods and any other body panel or automotive parts may contain scratches or small dings. These parts are sold in good usedworking condition.

BULTACO PURSANG GAS TANK. Well used old Bultaco Gas Tank.

<p>Tank from 70’s Sherpa.</p>

They are original parts from back in the 70's.

Very nice flywheel for Montadero, should fit Bandido also. FREE ship to 48 states

BULTACO FRONTERA MK10 MODEL 180 COMPLETE BOTTOM END ENGINE CASES STATOR MAGNETO TRANSMISSION CRANKSHAFT PISTON. Will fit: BULTACO FRONTERA 250cc. Condition: NICE PARTS. CASES WILL NEED TO HAVE ALL ELECTRICAL REMOVED, PISTON REMOVED, AND CASES STRIPPED TO CLEAN OUT.