Motorcycle Crankshafts & Connecting Rods

SUZUKI RM80, 1986-2001. INCLUDES IMS PRO SERIES CONNECTING ROD WITH CRANK PIN, UPPER AND LOWER ROD BEARINGS, AND THRUST WASHERS. IF YOU WOULD LIKE US TO INSTALL THIS CONNECTING ROD KIT ON YOUR CRANKSHAFT.

Used to check connecting rod straightness with bottom end of engine assembled. This tool is an essential when doing top-ends or when building a new engine. Slide this tool into the wrist pin bushing in your rod, then rotate the engine to make sure the tool sits squarely on the crankcases.

THIS ITEM FITS THE 2000-2007 TTR 125 MODEL CRANKSHAFT IT HAS THE CORRECT 17 TOOTH CAMSHAFT GEAR, WHY BUY USED WHEN YOU CAN BUY NEW FOR LESS! IF YOU RACE YOUR TTR. THIS IS A" NEW" YAMAHA CRANKSHAFT FOR YOUR DIRT BIKE.!

This new connecting rod has been designed after the racing style H-beam rods long used in many types of racing. got a great deal on these, prices good while supplies last! these are the rods they use in the ultima motors, have a bunch of motors, transmissions, carbs, open belt primarys etc.

Engine rebuild kit for Yamaha YZ 250 2003-2016. Crankshafts are sold complete with Wiseco connecting rods and inner crankshaft webs. Crankshaft and Connecting rod. Crankshaft bearings. 66.4MM Forged piston.

( 2003-2005 ) YAMAHA YZ450F. THIS HOT RODS CRANKSHAFT FITS THE FOLLOWING.

Brass coated surface. Top/bottom bearing: SCM415 chromoly with silver coating for added heat resistance.

New Pro-X Connecting Rod Kit fo r. Yamaha Motorcycles.

New Hot Rods Connecting Rod with Bearings. Created from 8620 case hardened steel. Double forged for strength, shot peened for fatigue durability. Crank pin created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58-62 Rc.

New Bottom End Kit For Kawasaki KX 250 F 2004-2005.

Forged 4340 Steel I Beam Connecting Rods Shot peened for improved fatigue life. Sizes held to. 0001, finish honed in the USA. Bronze wrist pin bushings. Weight matched +/- 1 gram on each end. Exclusively using ARP fasteners.

80cc Crankshaft kit assy with longer connecting rod. - Fit 80cc piston with higher hole. 80cc Crankshaft kit assy with longer connecting rod. Fit 80cc piston with higher hole. - Connect rod marked "ZAE80".

Hot Rods - 4066 - Crankshaft Assembly. Condition is New. Shipped with UPS Ground.

No vertical play at all. very good condition in my opinion. long life head for this crank. rod has no heat discoloration. both halves are not chipped. threads are good on shaft. splines are good on shaft.

Wiseco Part Number:WPC125. Wiseco Bottom End Rebuild Kit. Fits YAMAHA YZ125 Models From 2001-2004. Bottom End Rebuild Kit includes crankshaft assembly, complete bottom end gasket kit, and bearings.

Connecting Rod Kit. Yamaha IT175 2020. Yamaha IT175 2019. Yamaha IT175 2018. Yamaha IT175 2017. Yamaha IT175 2016. Yamaha IT175 2015. Yamaha IT175 2014.

New Bottom End Kit For Kawasaki KX 250 F 2009.

Honda CRF 450R (2013-2016). COMPLETE BOTTOM END REBUILD KIT. Top and Bottom End Engine Gasket Set with Seals.

Bottom End Rebuild Kit includes crankshaft assembly, complete bottom end gasket kit, and bearings. Complete gasket set with all engine seals and O-rings. Double forged for ultimate strength and durability.

<p>09 Crf450 Core Crank. Condition is Used.</p><br><p>Hot rods crank. Good for a core.</p>

Hot Rods Bottom End Kit. Hot Rods main bearings and seals kit. Complete engine gasket set includes all gaskets and seals for complete engine rebuild.

This buy it now is for EVERYTHING YOU SEE IN PICS OFF A KAWASAKI KDX220A 2001 WITH ALL IN PICTURE, look at pics it is in good usable condition.

2006 Kawasaki KX450F. 2007 Kawasaki KX450F. 2008 Kawasaki KX450F. Connecting Rod Kit. Kits include the necessary crankpin, big-end bearing, small end bearing and washers for each model.

New Bottom End Kit For Suzuki RM 85 2002-2016.

New BOTTOM END KIT for Honda CR 125 R (04).

All new assembly sold complete with Hot Rods connecting rod. In the event of product failure or defect, products are limited to the manufacturer warranty. Incorrect Item Received Any item that has been installed,used, or shows any signs of installation.

New Crankshaft for Yamaha YZ 450 F (03-05).

New BOTTOM END KIT for Yamaha YZ 85 (02-16).

New Bottom End Kit For Kawasaki KX 100 2006-2013.

Hot Rods Bottom End Kit. Hot Rods main bearings and seals kit. Complete engine gasket set includes all gaskets and seals for complete engine rebuild.

New Bottom End Kit For Kawasaki KX 85 2007-2013.

Yamaha WR250F 2013. Yamaha WR250F 2012. Yamaha WR250F 2011. Yamaha WR250F 2009. Yamaha WR250F 2008. Yamaha WR250F 2007. Yamaha WR250F 2006. Yamaha WR250F 2005.