To achieve this, large rubber mounts were utilized to absorb the energy of the impact, see picture #5. I can program this scale to your special needs! The scale has a water level to set up the scale which is located on the body of the scale and can be seen by removing the platform or platter.
Model: 9476. Model: 9481. Notes:This item was not fully tested since we do not have the proper resources. When power was applied one sensor had its red, yellow, green LED's lit and the other had its yellow and green lit.
Model: 9477. This conveyor scale was used in a factory until around a year ago when the factory changed locations. The yellow casing surrounding the pulley system between the motor and belt is cracked but the pulley still spins fine.
The conveyor is complete and is in excellent condition. The Conveyor is in excellent condition and is complete. It is a 3 conveyor system 8" wide Intralox and PVC belts. Each driven by a Leeson 1/15Hp 220V 3 Phase Motor Washdown Duty.
We accept no responsibility for the correct application or installation of this item. This item is to be installed and maintained by qualified individuals. By purchasing this item you agree to hold us.
Hi-Speed CHECKMATE 2 OPERATOR INTERFACE. Lanes are 2-1/2" W x 20"L each with Banner T18SN6LPQ sensor & Over/Under auto-reject. (4) Lexan lane covers (one lane withoutas shown). Nice unit, works. Let us know if you would like for us to send you a copy.
This Check Weigher is in very good condition as shown. This is a great system for a non-wash down application. The Conveyor is in great working condition. Located in Lititz, PA 17543. This system was pulled out of production 8 years ago.
Weigh belt(center) 8"wide X 13"long with Clifton Precision Motor, Revere Transducer 50lbs cap load cell. Feed belt (right side) does not have a belt and is missing one idler roller as shown. With Clifton Precision motor.