Industrial Tool Combo Kits

The PXS-14 was the first set manufactured by SouthOrd, and remains one of the most popular. It represents quality and value, and contains everything you need to compromise most pin tumbler locks. Opens deadbolts, doorknob locks, most auto locks, and padlocks.

I test every tool before it leaves.

Of torque. (1) 18V LXT® Lithium-Ion Brushless Impact Driver (XDT08Z). (2) 18V LXT® Lithium-Ion Battery (BL1820 2.0 Ah). The BL Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently use its energy to match torque and RPM to the demands of the application.

Be Ready for Any Project or Job. Includes a carrying case.

M12 FUEL™ 2-Tool Combo Kit. M12 FUEL™ takes 12-Volt technology to the next level of performance. Coins are in raw uncertified condition. Weight and color of the stones is approximate unless otherwise indicated.

These essential accessories fit Milwaukee Impact Drivers/Drills and are compatible with the following models: 2601-20, 2601-22, 2602-20, 2602-22, 2650-20, 2650-21, 2650-22, 2651-20, 2651-22, 2652-20, and 2652-22.

Manufacturer: Milwaukee. 2407-20 Drill Driver. Output: 12V, 3A. 2462-20 Impact Driver. Employee:Chelsea M. Box has tears, scuffs, dents and tape. Item Condition: New other (see details). 1/4" Hex Chuck.

This is the 2 speed, professional model.

• 1/4" Ratchet / Spinner Handle and Sliding T-Bar. • Hex - 3, 4, 5, 6, 7, 8mm. • Hex Keys - 1.5, 2, 2.5mm. • Bit Adaptor. • Star - T10, T15, T20, T25, T30, T40.

This is a pretty rare socket set with a foldable ratchet I have not seen another one for sale in a very long time how is your chance to own one everything is in great shape Minor rust. Will post more pics Monday

BOSCH BRUTE TOUGH EC BRUSHLESS 18 VOLT 1/2" DRILL, BARE TOOL ONLY.

2750-20 M18 Brushless Impact Driver. 48-11-1815 M18 Compact REDLITHIUM Battery. 48-11-1840 M18 REDLITHIUM XC4.0 Extended Capacity Battery. Manufacturer: Milwaukee. Drive: 1/4" Hex. Max Speed: 450/1,800 RPM.

Now you can label all your sockets, socket rails, nut drivers, and wrenches for "Easy Read" and quick Organizing. See how easy it will be to find those pesky 1/4 Drive Sockets. “You be the Judge” will your sockets be easier to read and organize?.

Low Density Polyethylene Plastic. = ( LDPE ). All of my personal stencils are manufactured from a 1/8" thick sheet of LDPE. ( For professional use. ). (1) NO PARKING Stencil. This is a (1) piece stencil.

New in the box.

Comes with 18 different size sockets and a S-K 45170 wrench and vintage green tool box

Included with freshly serviced Powerbird, new charger, newer shelved aftermarket batt (fully charged measures 14v), new gesipa batt alone selling @ $299, also 2 nose pieces, 1/8 and 3/16, laminated documentation of parts breakdown and operator instructions, ( non gesipa case, Usa shipping only.)

The HFS MacPherson Strut Spring Compressor takes tension off to safely remove strut and spring assembly. Blow molded case protects components and provides easy transport. Fast and easy setup.

This is the hydraulic driver so it is 50% quieter than the regular impact. I test every tool before it leaves.

This is the mid size impact, small yet powerful.

Fit most of cases 12v and 18v. You must also ask for a quote before purchasing.

However, the interior is like new quality. All drawers, latches, wheels and handles are fully functional. Note: Tools are NOT included.

Pitman wedge : 1-1/8 opening. Application: separate ball joints tie rods and pitman arms. Tie rod spreader :11/16" wedge opening;. Ball joint separator :15/16 jaw opening.

This Clamptite 4 3/4" Stainless Steel Tool with Wing Nut gives you the ability to create a perfect, custom fitted clamp for your hoses in any application. Small and compact for portability and storage.

As shown, new.

A used, but in good condition Klein electricians tool belt. Cordura nylon 100%. Two tool pouches, 1st one has 8 pockets, 2nd one has 19 pockets, hammer holder, padded tool belt. Also comes with the suspenders, but they are not a Klein product. One of The hammer holder rivets is rusting other than that belts is in good conditions. Ask any questions if needed.

Vtg pair of aiming tools. Used, not sure how they work. Good to have for older vehicles.

NEW MILWAUKEE M18 CORDLESS JIG SAW KIT. M18 REDLITHIUM XC3.0. 2 - M18 XC3.0 BATTERIES. 2645-22 JIG SAW. JIG SAW BLADE. NON MARRING SHOE.

This Clamptite 4 3/4" Stainless Steel Tool with Aluminum Bronze T-Bar Nut gives you the ability to create a perfect, custom fitted clamp for your hoses in any application. Small and compact for portability and storage.

Installer and remover adapters for 1967 thru current 1/2 and 3/4 ton 4WD vehicles with DANA 44 front axle found in FORD, GM, DODGE, IHC & JEEP vehicles. Perfect for 4WD ball joint service/repair. Clamp max load: 4tons.

I also manufacture stencils. And.they're 60 MIL thick Polyeth ylene Plastic.= 1/16" thick. Edge Distance is 2" and 2.5". ( Plastic is 16" tall. 13" wide. ). Numbers are 12" tall. More Plastic.

(1) NO PARKING Stencil with 6" tall letters. And.they're 60 MIL thick Polyeth ylene Plastic.= 1/16" thick. ( I also have these listed in the thicker, 1/8" pro material. ). They're easily readable.not squished.

7 Piece Home Tool Set Pink Tool Kit Includes: 4 In 1 Screwdriver Long Nose Pliers Steel Shaft Hammer Measuring Tape Open End Wrench Torpedo Level & A Zippered Pink Carrying Bag.7 piece essentials around the house pink tool set includes: 4 in 1 screwdriver long nose pliers steel shaft hammer measuring tape open end wrench torpedo level & a zippered pink carrying bag.

I hope I helped. I also manufacture stencils. How I Stripe a Parking Lot.24 years.by Myself. They're not stiff or corrugated. ( Try not to buy any other. ). Numbers are 6" tall. And.they're 60 MIL thick Polyeth ylene Plastic.= 1/16" thick.

This tool eases the removal of the harmonic damper pulleys found on many Chrysler，Ford，GM，Hyundai，Mazda and Mitsubishi engines.

40pc Tap Die Set (MM). Product TypeTap And Die Sets. Product Details. 8-1.0mm, 8-1.25mm, 10-1.25mm,10-1.5mm. 5-09mm, 6-0.75mm, 6-1.0mm, 7-0.75mm, 7-1.0mm.

Well used, has markings, scratches, scuffs. Also it has some engravings (see pics). Charges and holds charge.

Fit most of cases 12v and 18v. You must also ask for a quote before purchasing.

• DC385 XRP 18V-volt cordless reciprocating saw's keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Condition is shown in pictures sold as is.