You are purchasing (1) New Hy-Gain BN-4000B - Beam Current Balun, 4000 Watts, SO-239 Connector. The BN-4000B is a current-type balun whose primary function is to provide the proper current paths between unbalanced coaxial cable and a balanced antenna feedpoint.
Forward Gain Up to 8 dBi. It can be rotated with a heavy-duty TV rotator. The Lightweight is ideal for rooftop or lightweight tower installations. Net Weight 21 lbs. Wind Load at 80 MPH 87 lbs. Power Capability (Transmitter Output) 600 Watt PEP, 300 Watt AM.
– Works with CDE-45, Ham-M, Ham-II, Ham III, Ham IV and all TailTwister rotators. DISASSEMBLED, NEW WIRING AND UPGRADED TO THE ROTOR EZ. INCLUDED WILL BE THE MANUAL FOR THE ROTOR EZ AND THE LED KIT. – Algorithms to deal with pot strip “dead spots”.
<p dir="ltr">HY-GAIN HAM 300 ANTENNA ROTOR AND CONTROL. Condition is Used.</p>%0a<p dir="ltr">Please see pictures for accurate description I will provide more pictures if needed</p>%0a<p dir="ltr">Item is from an estate sale and will sell as is no returns</p>%0a<p dir="ltr">I don't know much about the item but what you see in the pictures and what I found online</p>
HERE IS A REBUILD KIT A SET OF TWO ORIGINAL OEM NEW BEARING RETAINERS and 100 OEM BEARINGS ,FOR REBUILDING YOUR CDE HY-GAIN HAM 4,3,2,M (REQUIRES 2 retainers) AND THE TR-44/ CD-44,45 ( REQUIRES 2 retainers) ,TAILTWISTER T2X (REQUIRES 3 retainers and 138 bearings ),THESE BEARING RETAINERS ARE NEW AND READY FOR YOUR INSTALL.
FOUR PERSONS WERE ABLE TO LOAD AND UNLOAD IT. AS FOR THE TOWER ITSELF: SINCE WE TOOK IT DOWN AND TRANSPORTED IT, IT HAS BEEN RESTING UNDER A ROOF NOT EXPOSED TO RAIN/SNOW AND RESTING ON BRICKS TO KEEP IT OFF THE GROUND.
<p>Auction here is for a new never used original genuine HAM 4 brake casting Part number 5136400 this is the casting that supports the brake wedge solenoid not included the casting is new and comes as shown in photos this casting also replaces the old ham m , 2, and 3 rotors as well it's a direct replacement .sold as is no returns payment by pay pal at auctions end . Thks ken KT4KI 73!</p>