Guitar Effects Pedal Power Supplies

Powers: For 9V 12V or 18V PEDAL. Input: DC 18V. 10 Isolated Output. Isolated Short Circuit/Overcurrent Protected. --7 way 9V 100mA. --1 way 9V 500mA. Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate.

Powers: For 9V 12V or 18V PEDAL. Input: DC 18V. --7 way 9V 100mA. --1 way 9V 500mA. Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate. All 10 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function.

8pcs DC power cable included.

Donner 5 way power cable adapter for use with electric guitar multiple effect pedals. High quality daisy chain with special anti-hum. The professional noise isolation performance ensures you a quiet pedal chain condition while you play.

Great condition - fully functional

There is a short. from the DCB10’s seven 9v outputs and three 18v outputs. AC adapter and all necessary cables to. • Powers eight 9V pedals and two 18V pedals. DCB10, but it handles twice the power.

Powers For 9V, 12V or 18V Guitar effects PEDAL. 7CH 9V(100mA) for ordinary analog effectors, 1CH 9V(500mA) for digital effectors and DC 9V low-power digital guitar amplifiers, 1CH 12V/18V(100mA). Input: DC 18V.

AC adapter and all necessary cables to connect pedals to the unit are included. • Powers eight 9V pedals and two 18V pedals. Strukture S6P48 Right-Angle Guitar Patch Cable 6 in. It’s not just about videos and know how; it’s about the person on the other end of the line.

With 10 isolated outputs - 8 for 9V effects, the rest for 12V & 18V respectively. Output: DC 18V. Easy operation, no need of complicated installation. Compact and portable design, easy to carry along.

Guitar Fret Stickers. Powers For 9V, 12V or 18V Guitar effects Pedal. Guitar Chord Stamp. 7CH 9V(100mA) for ordinary analog effectors, 1CH 9V(500mA) for digital effectors and DC 9V low-power digital guitar amplifiers, 1CH 12V/18V(100mA).

Powers: For 9V 12V or 18V PEDAL. Input: DC 18V. 10 Isolated Output. Isolated Short Circuit/Overcurrent Protected. --7 way 9V 100mA. --1 way 9V 500mA. Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate.

The 5V USB output enables you to load your cell phone, iPad and other portable devices. 1 DC 9V/12V/18V adjustable output, maximum output current is 100mA. One 5V output USB port, compatible for charging cell phones, tablets and other portable devices.

Powers: For 9V 12V or 18V PEDAL. Input: DC 18V. All 10 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function. Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate.

Powers for 9V, 12V or 18V guitar effects pedal; Power: AC 110V - 240V; Product Size: 15x5x3cm / 5.9x2x1.2in; Net Weight: 388g / 12oz. 7CH 9V(100mA) for ordinary analog effectors, 1CH 9V(500mA) for digital effectors and DC 9V low-power digital guitar amplifiers, 1CH 12V/18V(100mA).

Powers For9V, 12V or 18V Guitar effects Pedal. Input: DC 18V. 1 way 18V 100mA. 1 x DC 18V Power Adapter. All 10 outputs in this unit have separate short-circuit protection, i.e.short circuit in one channel won't affect other channels’ function.

Compatible with most popular makes of pedals: Boss, Digitech, Behringer, MXR, Ibanez, Digitech, Zoom, EBS, Guyatone, BIYANG, JOYO, MOOER etc. Guitar Fret Stickers. Guitar Chord Stamp. Guitar Effect Pedal.

6 right-angle barrel connector power cables, 2 straight barrel connector cables. 1 cable w/ 9V battery snap connector for pedals w/out power jacks, and manual.

6 isolated DC outputs: 2 9V 100mA, 2 9V 300mA, 2 9V 500mA, multiple outputs for more convenient usage. Power Output: 2 DC 9V 100mA. 2 DC 9V 300mA. 2 DC 9V 500mA. Power Adapter:100-240V US/ EU plug (optional).

First, let’s talk outputs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.

The back panel of the 1 SPOT Pro CS12 has a 2-position 115/230V~ switch that allows the 1 SPOT Pro CS12 to be used in most countries. This switch only effects the 9VAC output, but it's important to set it correctly whether you use that output or not?.

Powers: For 9V 12V or 18V PEDAL. Input: DC 18V. Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate. 10 Isolated Output. All 10 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function.

Compatible with most popular makes of pedals:Boss, Digitech, Behringer, MXR, Ibanez, Zoom, EBS, Guyatone, BIYANG, JOYO, MOOER etc. Guitar Fret Stickers. Guitar Chord Stamp. Guitar Effect Pedal. Output:DC 9V 1A.

To put this into context, iFi's very own Ultra-Low Noise AC/DC adapter was in a class of its own at 10uV. There are two separate but similar 'Array Technologies' used in the iPower. It's simple to use.

Based on other information found on the Internet this should be compatible withMackie Mix5 Mix8 Mix12FX Mix 12 FX Mixer.

AC adapter and connector wires included.

The redesigned green shell has a triple reinforced USB housing to make it the most durable Volto yet. More power. More durable. We’re happy to continue Volto's winning tradition with Volto 3 - an amazing little green machine!

1 SPOT Compatibility Chart The 1 SPOT is 9VDC (not AC), with a barrel-style output plug which is center negative. The Converter Plugs (CL6, C35, CYR, CBAT) allow the 1 SPOT to work with other types of DC power jacks and opposite polarity.

1 x Ablegrid 3 Way Daisy Chain Cable. For Electric Guitar Effect Pedal. Output: DC. Cable Length: 40cm between connectors. We always make an effort to keep it upto date. We stand behind our quality products.

DUNLOP DC Brick 9V / 18V Guitar Pedal Power Supply. Condition is Used but in very good shape. Well taken care of and works perfectly. There is some Velcro as seen in the pictures. Hit me up with any questions. Thanks! Jon

12 fully isolated outputs. “A lot of people over the years had told us that we should make a power brick. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need.

Able to handle up to 100mA of current, it can help you power just about any 18V or 24V pedal . NOTE: Polarity for both input and output is center pin negative. Can I use this on an MC5 or MC8 daisy-chain with my 1 SPOT?.

10 Isolated Output,Isolated Short Circuit/Overcurrent Protected. Power: AC 100v-240V Input: DC 18V,Powers For 9V12Vor18V PEDAL. Input: DC 18V. --1 way 18V 500mA. --6 way 9V 100mA. --2 way 9V 500mA. Updated version,high current,better exert your effect pedal.

9.6V DC 500mA, barrel connector, reverse polarity. LED indicator for quick visual verification of on/off status. 500 mA of current to easily power multiple pedals, even digital ones.

Now, both line and high-impedance signals are cleaned - but with no loss of sound. The DC Filter is of full stereo type, and thus filters stereo - and, of course, mono - signals. This little aid can even process balanced signals.

Auction Includes: 3 High Gain 9dBi WiFi Antennas RP-SMA   .

7CH 9V(100mA) for ordinary analog effectors, 1CH 9V(500mA) for digital effectors and DC 9V low-power digital guitar amplifiers, 1CH 12V / 18V(100mA). -Powers For 9V, 12V or 18V Guitar effects PEDAL. - Isolated Short Circuit / Over current Protected, short circuit in one channel won't affect other channels' function, and it plays a part in detecting the short circuit part.

Power: AC 100v-240V Input: DC 18V,Powers For 9V12Vor18V PEDAL. Input: DC 18V. --1 way 18V 500mA. --6 way 9V 100mA. --2 way 9V 500mA. --1 way 12V 500mA. 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected.

Akai, aphex, arion, austone. boss, barber, behringer, carl martin, digitech, dod, dunlop, ebs, electro-harmonix, guyatone, harman, lbanez, jacques, caline, line 6, marshall, maxon, moogerfooger, mooer, morley, mxr, mobels, rat, rocktron, t-rex, tc electronic, voodoo lab, zoom, zvex.

You’re purchasing from an authorized Voodoo Lab dealer. Filter, regulate, isolate, and protect! Pedal Power 2 Plus does it, and does it well, because any less will degrade your pedal’s performance.

In fact, never buy a 9v battery again (for your pedals at least). If you add in the optional Snark SA-2 daisy chain you can power 5 pedals per daisy, up to 15 pedals! That's a lot of pedals, and even more batteries that without the Snark SA-1 would remain a constant black hole for you to throw your money into.

Output: DC 9V 1A. High quality daisy chain with special anti-hum. 1 x 8 way Daisy Chain Cable. 8 way power cable adapter use for electric guitar multiple effect pedals. Output DC 5.5mm x 2.5/2.1mm power Jack.

Housed in an ultra-compact aluminum chassis, the virtually weightless X4 mounts to even the smallest pedalboards, including Voodoo Lab Dingbat TINY and Pedaltrain® Nano. This is the X4 Expander Kit, no power adapter included.

This design can better exert your guitar effect pedals, get a better sound. If you have two or more pedals on your pedal board, which requires more stable power source and more quality, Donner DP-3 is your right choice.

1 cable w/ 9V battery snap connector for pedals w/out power jacks, AC power cable and manual. 10 right-angle barrel connector power cables, 2 straight barrel connector cables.

The FX Power Source 10M, powers 9V effects pedals on 8 outputs, which work with the majority of the pedals on the market. 9V power options: Outputs 1 - 7 (9V @ 100mA) Output 8 (9V @ 500mA). Output 8 is designed for the higher current 9V effects pedals and switchers out on the market.