Component Sensors

WOULD YOU LIKE TO GET A LITTLE MORE FREEDOM AND COMFORT IN YOUR LIFE AND ACTIVITY?. YOU CAN DO IT WITH OUR WATERPROOF ADHESIVE PATCHES FREESTYLE LIBRE! OUR ADHESIVE PATCH IS EASY-TO-SET – FixiC adhesive patches has TWO-PART BACKING PAPER.

1/2" CdS photocell. Includes screw thread, zinc alloy nut, and rubber washer. Temperature compensation system provides consistent performance whether it’s hot or cold. On/Off Levels: 10~20Lx On (Dusk), 30~60Lx Off (Dawn).

Arduino pH Sensor. Provides continuous 0-5v or 0-3.3v analog output from 0-14pH for Arduino or PLC. Arduino Uno sample sketch included. Industrial grade pH sensor transmitter only. Cable included, attached to the unit.

Pt100 Temperature Sensor. Probe length:100mm. Probe material:Stainless Steel. Thread :M8 1.25 with nut.

2007 Nissan Altima L4 2.5L;Fits Downstream ;Gas Engine; Except. 2011-2013 Infiniti QX56 V8 5.6L Fits Downstream. 2007 Nissan Altima L4 2.5L;Fits Downstream;Loc. After Primary Catalyst; Gas Engine; Calif.

UART hardware connection：. -Output signal: UART / PWM. -Output modes: UART and PWM wave. -Target Gas: CO2. -1 x MH-Z19B Infrared CO2 Sensor. -Interface level: 3.3 V. Connect the sensor's Vin-GND-RXD-TXD to the user's 5V-GND-TXD-RXD.

1/2" CdS photocell. Ideal for wiring into a lamp or lighting system requiring photoelectric automation. Functions as a light sensitive switch that will turn off devices in the presence of light and turn them back on in the absence thereof.

We have tested all the products, and to ensurethat can be normal use. 7.1AMP, 850VA Ballast. 1800VA Ballast. Auto Sensor. Auto Door Lock. PC CPU Fan Heatsink. Switch Parts & Accessory. Thermal switch.

The RCWL-0516 is a Doppler radar microwave motion sensor module using the RCWL-9196 IC which is an alternative to a PIR motion sensor such as the HC-SR501 or HY-SRF05. Instead of sensing changes in infrared emitted by a moving person, this sensor uses a microwave Doppler radar to detect moving objects.

My Sugar Patches allow you to carry out various activities while keeping your Freestyle Libre sensor safe. My Sugar Patch fits perfectly around the Freestyle Libre and ensures that your sensor will not get dislocated.

The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.

1 x DHT22 Temperature Sensor. - Humidity range:0-100%RH. - Temperature range:-40~80℃. You will be pleasantly surprised by our service. This can only delay our service.

Output form： NPN normal open. 5PCS Inductive Proximity Sensor Switch. Model： LJ18A3-8-Z/BX. We will be very honored to provide you with quality servi ce.

Laser Through Beam, NPN detector output,0-30M detection Range. Output Type NPN Normally Open. 1Pcs M12 NPN NO Laser Emitter. 1Pcs M12 NPN NO Laser Receiver. Output Type NPN. Note: This Kit is Without Supporting Bracket,You should prepare Yourself.

Green = A phase, white = B phase, red = Vcc power , black = V0. 600 p/r (Single-phase 600 pulses /R,Two phase 4 frequency doubling to 2400 pulses). Output :AB 2phase output rectangular orthogonal pulse circuit, the output for the NPN open collector output type.

Note: ACS712 is based on the principle of the Hall test. - 1X ACS712 Current Sensor. You will be pleasantly surprised by our service. This can only delay our service.

6X Distance Sensors. - Uses IO trigger distance and the high signal to at least 10us;. - Detection distance: 2cm-450cm. - Electrical level output: at the end of 0V. You will be pleasantly surprised by our service.

DHT11 Temperature Sensor. - 1X DHT-01 Temperature Sensor. Hardware Specification. - Built in fixed bolt hole for an easy installation. This can only delay our service. You will be pleasantly surprised by our service.

Vibration and shock sensor module. Ideal for your next science or prototyping project. - Digital output for shock and vibration sensor. - 2 x SW420 Tilt Sensor. - Can be powered from 3.3V ~ 5V power source.

SENSOR SWITCH PP-20 OCCUPANCY POWER PACK 120/277 NIB! Bid with confidence, ready to ship!

Power indicator LED. LM393 comparator for stable results.Specification.

New Nomal Close LJ8A3-2-Z/AX Inductive Proximity Sensor Switch NPN DC6V-36V. Output Type NPN NC(Normally Close). 5 Pcs LJ8A3-2-Z/AX Inductive Proximity Sensor Switch. Theory Inductive Sensor. 10 pcs LJ12A3-4-Z/BX Inductive.

Running at 16MHz and 5V. - 1 x USB Cable. - This tiny little board does all of the neat tricks that big boards do. This can only delay our service. - Got a problem?. No Problem. - 12 x Digital I/Os (5 are PWM capable).

2X Oxygen Sensor for 2005 2004 2003 2002 2001 Honda Civic L4-1.7L D17A7 Engine. OXYGEN SENSOR. Our hours of operation are ATV Parts - CV Axles. Prower Steering Pump.

Ambient Temperature: 40℃~ 70℃. ---Approved By UL CERTIFIED,Ensure safety. --Operate Level: 10~20Lx On / 30~60Lx Off. --Due to the different display and different light, the picture may not reflect the actual color of the item.

The unipolar switching characteristic makes these devices ideal for use with a simple bar or rod magnet. With suitable output pull up, they can be used with bipolar or CMOS logic circuits. Resistant to Physical Stress.

1999-2003 Lexus RX300 V6 3.0L. Q: How do I know the O2 sensor is good or not?. (Online Video ). 1998-1999 Lexus ES300 V6 3.0L. 1 x Air Fuel Ratio Sensor. If the sensor is good, further diagnosis is required.

· 1/2" CdS photocell. Includes screw thread, zinc alloy nut, and rubber washer. Temperature compensation system provides consistent performance whether it’s hot or cold. · On/Off Levels: 10~20Lx On (Dusk), 30~60Lx Off (Dawn).

Type: Infrared Obstacle Avoidance Module. - When the module detects the front obstacle signal, the green indicator light on the. - 5X Obstacle Avoidance Sensor. - The sensor active infrared reflection detection, so the target reflectivity and shape is.

Product description:  Detection distance: 4mm  Voltage: DC 6-36V Polarity: NPN  Dimention: 12 x 50mm Length:about 1m       Package Included: 1 x  LJ12A3-4-Z/BX Inductive Proximity Sensor Switch NPN DC 6V-36V NEW Brand Unbranded/Generic MPN Does Not Apply EAN Does not apply.

"Zero-touch" gesture user interface. Gyroscopes range: ± 250 500 1000 2000 °/s. Chip built-in 16bit AD converter, 16-bit data output. Communication mode: standard IIC communication protocol. Chip: MPU-6050.

Arduino Conductivity Sensor. Industrial sensor and unit ready to be used for continuous monitoring. Range : 0-5 EC or (0-5000 micro/S) or 0-3200ppm/TDS. Continuous monitoring ,industrial grade. Size : 2 " x 2" ABS enclosure.

Uses IO trigger distance and the high signal to at least 10us;. - 2X Distance Sensors. - Detection distance: 2cm-450cm. - Electrical level output: at the end of 0V. You will be pleasantly surprised by our service.

New Nomal Close LJ8A3-2-Z/BY Inductive Proximity Sensor Switch PNP DC6V-36V. Output Type PNP NO(Normally Open). Theory Inductive Sensor. 5 Pcs LJ8A3-2-Z/BY Inductive Proximity Sensor Switch. 10 pcs LJ12A3-4-Z/BX Inductive.

Nominal resistance: 10k ohms. 4.5" Flex Sensor. Family: FLEX. Maximum resistance: 30k ohms to 40k ohms, proportional to the degree of flexing or bending.