Collectible Woodworking Planes

This plane has been repaired at the cheeks by a previous owner. This is a Stanley No. 62 low angle plane in good condition. All of the parts on the plane are correct for this type including the unique knob and tote.

This is for a vintage Union Manufacturing Company of New Britain Conn. No. 3C corrugated bottom plane from a local estate. I took a lot of pictures so you could see it's condition so please look at them closely. It has a lot of wear from use, a lot of staining/spotting including rust spots from storage, the rear handle is cracked into two pieces with a big chunk missing from the top, and the iron needs a sharpening, but overall it's in good working condition. Also please note that the screws for the handles are two different types (see pictures). The rear handle is a one piece screw while the front knob has a brass cap. Please look at all 24 pictures available in the "Item Description" linked just below.

STANLEY No. 67 Sweetheart SPOKESHAVE NICE!. Condition is Used. Shipped with USPS Priority Mail Small Flat Rate Box.

<p>Stanley No 151 Spoke Shave. Made in England. Condition excellent, super sharp. Shipped with USPS Priority Mail.</p>

Trademark stamped. Size: 18” long & 3” wide. Made in the. This plane is in good condition with normal wear from use & storage; the lever cap has pits, scratches to the japanning, & the owner’s initials are on the side (see second photo).

Very Nice Stanley Bailey No. 5-1/2" Wood Plane Smooth Bottom -- Stanley Cutter. The plane is 5-1/4" not 5-1/2".

Plane is in used condition as seen in the pictures. Lightly cleaned, oiled and no owner's marks. There are 2 repairs to the body. One side has a weld that doesn't appear to be needed on the inside as pictured and one corner has been filed down as pictured.

COFFIN TYPE NO MAKERS MARK. I DON'T KNOW ANY THING ABOUT THIS, CAN'T FIND ANYTHING THAT LOOKS LIKE IT ON THE INTERNET. IN GOOD SHAPE FOR AGE.

This is a Stanley No. A 5 aluminum jack plane in excellent condition. This plane is in excellent condition and made of aluminum (base and frog). This version cost more than the cast iron example and was only made for a few years as they were not popular with those who used them.

Stanley SW No S18 Steel Body Adjustable Mouth Block Plane. This weighs 1 lb 2 1/2 oz unboxed. This is in decent condition overall. The mouth adjuster works. The japanning is original and about 90% present.

<p>L Case Watertown NY complex woodworking plane.  Proper wedge and iron.</p> <p> </p> <p>Looks like a bead cut w a side fence in the plane.</p> <p> </p> <p>Marked 1/2 on the back.   Light owner marks.</p> <p> </p> <p>Please check pictures.</p> <p> </p>.

It's marked- "Stanley". It's in good condition. It has a little minor light surface pitting in a couple of small spots (see photos).

<p>Vintage Stanley Bailey No 4 1/2 Wood Plane **Complete** Made In USA. In very good condition as pictured. Appears to be all original. </p><br><p>Length: 10.25” </p><p>Width: 2.9”</p><p>Height: 5.75”</p><p>Weight: 4Lbs 12oz</p>

THIS EARLY SPOKE SHAVE IS IN GOOD PLUS CONDITION. IT HAS OVER 85 PERCENT OF ITS ORIGINAL BLACK JAPANNING STILL IN PLACE.

<p>Stanley Bailey No. 3 Plane Made In England Very Nice. Condition is Used. Good. Lean working condition. </p><br><p>Exactly as pictured is what you will receive.</p><br><p>All payments are due within 48 hours (2 Days).</p><br><p>If you have zero feedback, you must contact me PRIOR to bidding or your bid will be cancelled.</p>

Up for Sale is a Stanley No. 200 Honing Guide. It's in Excellent Condition with 99% Japanning.

This is Siegley's Adjustable Combination Plane No 2 Made by Jacob Siegley in WilkesBarre Pennsylvania. On the left side of the body is a tiny logo which reads Siegleys Patent August 19 ,1890. This tool was made to be a combination of a carpenters plow, dado, side and center bead plane.

The plane is in excellent condition with 98 percent black finish, cutter looks to be full length and is sharp and ready to use. The box and label look great as well.

The back (unbeveled) leading edge was polished to a mirror finish. Fully assembled, all screws were properly tensioned for use and the plane tested and adjusted until perfect. Nothing beats the feel of a properly tuned plane gliding across wood and this one produced wispy thin shavings effortlessly in my test cuts.

This is a Stanley No. 2 bench plane in excellent condition. I have lightly cleaned and lubricated this plane where appropriate. I use gentle hand techniques and no harsh abrasives or chemicals. I prefer to take a plane to the point where a craftsman would be proud to have it on the bench and I dislike overcleaned or polished tools.

Good length Sweetheart SW cutting iron honed razor sharp at a 30 degree secondary bevel. - Nice example of a Bailey smoother - desirable type 11. - no issues to planes body or frog.

<p dir="ltr">I'm auctioning a vintage STANLEY No. 18 adjustable throat block plane "V" LOGO. Condition is good used with former owner "M" marking and poor pkating on cap.   Shipped with USPS Priority Mail.  I accept Paypal and I would expect payment within 7 days. Buyer pays for shipping and insurance when necessary. Photos part of the description, but please feel free to ask questions or request additional photos. Returns not accepted unless item not as described with buyer paying for return shipping. Good luck!!</p>

Sits Level.

<p>Large variety lot of woodworking planes.  Assume some owner marks.  All with wedges and irons.</p> <p> </p> <p>Denison rabbet, wedge damage</p> <p>L&IJ White handled plane</p> <p>King NY dado plane</p> <p>Denison hollow</p> <p>Wallingford Ct complex</p> <p>Denison side bead</p> <p>Howland rabbet fillester</p> <p>Wide denison complex</p> <p> </p>.

It's marked- "Stanley, Made in U.S.A." along with the sweetheart mark. It's in very good condition (see photos).

Condition is Used. With ding dents and scratches. Works well.

See the photos for the whole story. Condition- All original parts. Nice full length iron just needs a light honing. Adjusts smoothly.

This frog was discovered at the estate of a woodworker. There were several Lie Nielsen planes available as was this frog in the original box. This is a Lie Nielsen No. 4 or No. 5 plane frog (common pitch) in excellent condition.

<p>Stanley 5 1/2 in good condition for a user. No cracks, chips or breaks. There is 2 owner’s markings on the rear of the sole behind the tote (please see 3rd photo). Tote & knob are in good condition as well with no cracking or breaks. </p><br><p>Shipping with fast USPS Priority</p>

Extra Nice Stanley No. 3 Smoothing plane. Beautiful Rosewood handles, full blade, 98% japanning and nothing broken.

This plane has the "knuckle joint" feature and a nice weight @ 1.5 lbs. The plane has 95% japanning and nothing broken.

<p dir="ltr">Stanley no. 45 combination plane. Condition is Used. Shipped free with USPS Priority Mail to lower 48 states only. If you live elsewhere,  and want to pay for shipping, arrangements can be made.</p> <p dir="ltr">Stanley 45. Very nice find. Very clean and apparently well kept. I wiped off the dust and thats it. It may have been painted before but if they did, it was a really good job.  Handle is solid and tight. Possible repair on handle. Please look at the photos. The handle has no wiggle at all. The knob on the front has no cracks and is tight. Please look closely at the pictures as you probably know more about it than i do. This looks like it could be used with no maintenance.  Put a blade in it and start creating.</p>

Nothing broken.

Vintage Stanley? or Sargent? 14” Smooth Sole Hand Plane Tool USA. Condition is Used. Shipped with USPS Priority Mail.

<p>Good used shape older Stanley 2 smoother plane.</p> <p> </p> <p>Note, decal tote is cracked below decal.</p> <p> </p> <p>Pin chip off cap edge.</p> <p> </p> <p>Looks like a low fat front knob.   Mouth and bottom are in nice shape on this plane.</p> <p> </p> <p>Sweetheart era cutter, no owner marks on body.</p>

Sweetheart logo on plane iron. CHIP IN ROSEWOOD KNOB AS SHOWN IN PHOTOS. OTHERWISE A SOUND TOOL WITH GOOD EDGE, TOOL APPEARS TO HAVE BEEN CLEANED UP. SOUND TOOL WITH GOOD EDGE.

<p dir="ltr">Antique stanley wood plane. Condition is Used. A very nice old pair of 113  excellent working condition need more pictures just message me</p>

Tool Type: smooth plane. Marks: STANLEY 76. Condition: SEE PHOTOS! Materials: wood, cast iron, steel. MY POLICIES ON.

It has the features of a type 4 Pre-Lateral Plane. Good overall condition. A few nicks in spots, most visible in pics. Tote has a glue repair. Mushroom shaped front knob. "73" cast in base. Great collectable.

THIS PLANE WAS ACQUIRED AT A NORTHERN NEVADA ESTATE SALE AND BEING SOLD AS ADVERTISED AT THE SALE. THERE IS NO RESERVE.

<p>Fine shape maybe used once lie Nielsen 4 1/2 bench plane.   No box or paperwork.</p> <p> </p> <p>Super clean and well taken care of.</p> <p> </p> <p>Wood and cap are in fine shape, cutter is marked.</p> <p> </p> <p>Pictured is the plane you will receive.</p> <p> </p>.

Nice antique Bed Rock 604 Corrugated Plane. It's clean, used, blade is sharpened, the casting is pitted from prior rust, no breaks, no cracks, no repairs. Good clean user plane.

99% japanning, full length blade, beautiful Rosewood handles, an outstanding plane and nothing broken.

It's marked- "Stanley". It's in good condition.