Camera Film Backs & Holders

Estate item, Great Condition.

Compatibility: RB67 System. Up for sale from KEH is thisMamiya 120 Pro-SD Film Back ! Model: 120 Pro. More than average wear for the age of the item, and may have dents, dings or finish loss. Glass may have marks or blemishes, but should not affect picture quality.

Fidelity Deluxe film holder for 8x10 sheet film. All working order with dark slides and locking tabs. Hinge tape is still strong.

Shooting 135 film 24 exp=12 exposures, 36 exp=20 exposures. It only takes less than 90 seconds to install or faster once you get used to it!

Excellent condition Fidelity Elite 8x10 film holders with all dark slides and locking tabs. Hinge tape looks excellent. I have tested these with black and white film and haven't noticed any light leaks.

This 3-D printed back is an opportunity for you to maximize the versatility of your Mamiya Universal Press. It allows you to shoot 4x5 film in Graflex (or other) 4x5 sheet film holders. This particular back is designed for the typical 4x5 dual dark slide back.

An original Hasselblad film back for 12 exposures, 6x6 images, in 120 roll film. Fully functional, smooth wind, snappy counter reset. Pressure plate is nice, no light leaks, no creases or dings in dark slide.

Works great. Just getting rid of my hassie stuff. Hasselblad 16 Film Back 6x4.45 120 Film . Condition is Used. Shipped with USPS Priority Mail.

Vintage Riteway fidelity Lisco 4 x 5 film holder lot. Condition is Used. All need a cleaning , none seem broken .

This most useful film holder is in excellent working condition.

GRAFLEX 2 1/4 X 3 1/4 COMPLETE GRAFLOK BACK WITH ORIGINAL MOUNTING SCREWS. GOOD GROUND GLASS.

Dark slides are all intact.

Very clean and new.

Compatibility: RB67 System. Model: 220 Pro-SD. Item Specifics: Missing Dark Slide. "EXCELLENT CONDITION. ". 80 to 89 percent of original. Shows moderate wear for the age of the item, with the possibility of small dings or blemishes.

Up for sale at KEH is this20- 4x5 Sheet Film Holders (Fidelity, Lisco, Graflex, Riteway). Model: Film Holders. Compatibility: Film. More than average wear for the age of the item, and may have dents, dings or finish loss.

1 - 620 Take Up Reel. This is a used Adapt-a-Roll Film Back that is in Good Condition. There is minor wear from normal use around the outer body along with a few minor spots of rust around a few screws.

RZ67 Pro-II. Mamiya RZ 120 PRO II (6X7) Film Back. Compatibility: Mamiya 120 Film Back. More than average wear for the age of the item, and may have dents, dings or finish loss. Glass may have marks or blemishes, but should not affect picture quality.

GRAFMATIC "45" GRAPHIC FILM HOLDER. Six shooter.

Compatibility: Bronica ETR System. Other - GalaUp for sale fromKEH Outlet is thisBronica 120 Film Back For ETR System. Model: 120 Film Back. More than average wear for the age of the item, and may have dents, dings or finish loss.

4x5" Holder. BOTTOM-LOAD - plate goes up through a slot - don't even CONSIDER trying to use this for wpc work! Using with film sheaths would be challenging! Body solid.

GRAFLEX 4X5 COMPLETE GRAFLOK BACK WITH GROUND GLASS, FRESNEL LENS, AND HOOD IN VERY GOOD CONDITION. FOCUS HOOD OPENS AND CLOSES NICELY. ORIGINAL MOUNTING SCREWS INCLUDED.

Six Lisco REGAL II 4"x5" Cut Film Holders - 2 New Old Stock Boxes (containing 2/each) & 2 Loose Used Holders International buyers: Please check the shipping calculator for the shipping charges to your location. Any local Customs fees, import duties, or taxes are not included in shipping cost Nice lot of six Lisco REGAL II 4x5" (10 x 12.5 cm) cut film holders. Four are brand new, in box (new, old stock) and two are gently used. The new ones don't have a mark on them. The used ones look to be in very good condition with the usual light rub marks on the plates. The seals on the bottom appear to be in good shape.

Hasselblad A-12 Black 120 Film back. Shows wear on top & bottom from mounting.Seals are good.Wear shown in photos. We hope to see you soon! 9:00AM to 5:00PM.

Hasselblad A16 645 Roll Film Back (Black). Condition is used and works perfectly. Shipped with USPS Priority Mail.

You're purchasing a Polaroid Mamiya RZ67 film back. The unit is in great shape, clean with only light wear from usage. It's normally faster, but lets play it on the safe side! We CAN NOT mark your item as GIFT.

All parts are there and they appear to be in working condition. Both have dark slides.

This dark slide fits the film back.

It has been tested as far as function and it works as designed - it has not been tested with film. Also included is a 4X5 plate with ground glass with a 2X3 opening that fits a graflok back exactly as the roll film holder and which should be very handy for checking focus and coverage.

Tiltall 4"x5" Cut Film Holders - New (Old Stock) Box (containing 2/each) International buyers: Please check the shipping calculator for the shipping charges to your location. Any local Customs fees, import duties, or taxes are not included in shipping cost Two new (old stock) Tiltall 4"x5" cut film holders (10 x 12.5 cm), in their original box and cello packaging. I don't know much about these but they were included with a lot of 4x5 supplies I bought recently. They are probably not the quality of Toyo or Lisco but they are described as having an all metal core. I removed one from its cello wrapper to provide detailed images. They are double sided. Made in Taiwan. We are happy to combine shipping on the purchase of multiple items.

· SmallRig Multi-function Double Ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. Shoulder Rig. · It can mount monitor and LED Lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob.

2 - BRONICA SQA, SQAi 120 FILM INSERTS IN GOOD WORKING CONDITION LOT OF 2.

Horseman SW Roll Holders 6x9 (55x82mm). Mask size is standard Japanese “6x9,” which is 55x82 (1.5:1 aspect ratio). All include correct dark slides. If you see qty 4 available, you will get D. If you see 3, you will get C.

Mamiya RB67 220 back. Condition is Used. In excellent condition.

The back and insert are not a serial number match. The seal is good and the back is light tight. The overall condition is EX . The back is in perfect working condition.

For sale is my personal Mamiya RZ67 with the Sekor Z 110mm F2.8 lens. The sale includes two 120 backs that work great with no light leaks and a cushioned strap as shown in the photos.

CONTAX 645 Film Insert MFB-1A 120/220 w/Case. Condition is Used. Shipped with FedEx Ground or FedEx Home Delivery.

Mamiya Polaroid Land RB67 Back Clean. Condition is Used. Shipped with USPS Priority Mail.

Condition is Used.

Up for sale at KEH is thisMamiya 645 120 Pro (211-418) Film Back. Format: 120 Film. More than average wear for the age of the item, and may have dents, dings or finish loss.

ROLLEX-PATENT ROLL FILM BACK. Condition is Used. Shipped with USPS Parcel Select Ground.

Hasselblad sheet film adapter. Shows normal wear but is fully functional. For use with Hasselblad cut film holder.