BRECKWELL PELLET STOVE AUGER MOTOR - 1 RPM. For use in the following BRECKWELL stoves All Breckwell stoves manufactured after 2002. Installation is easy; only one set screw or cotter pin couples the motor to the auger.
This will also replace the Breckwell Cadet Model all open top burnpot. This burn pot assembly replaces the A-S-070-I burn pot assembly. If you have a P2000I, P2000F or P2700 that is older than the units listed here, you may need a different burn pot.
BRECKWELL PELLET STOVE AUGER MOTOR - 4 RPM. Most models require the motor shaft be pinned to the auger - there is a hole in the shaft to accommodate this. Other models (after 2002) use a locking collar which require a beveled edge, this motor works with all these stoves.
I have a large inventory of used Pellet Stove parts not yet listed, and I am continuously finding a variety of new and older models to part out! Goes from Exhaust Blower Housing - 90 degrees to 3" Pellet Vent.
The Breckwell SW180 wood burning stove is the perfect alternative to a drafty chimney, the SW180 can fit easily into your existing masonry fireplace and will fit almost any UL listed pre-fab fireplace.
LET US KNOW FOR PRICING ON ALL ACCESSORIES, WE CARRY VENTING AS WELL The rugged, reliable powerhouse of the Breckwell line would have to be the SP1000 Big E. This simple, straight foward unit delivers top performance year after year, and is still an excellent value. Especially easy to operate and maintain, the Big E has more features and benefits than comparable-priced stoves, and is the smart choice for the value-wise consumer. Specifications: Up to 47,000 BTUs Up to 2,200 sq. ft. 120 lb Hopper Capacity Dimensions: Width: 25.75" Depth: 23.875" Height: 32.625" Weight: 220" EPA Certified, Mobile Home Approved, Washington State Approved, Canada Approved.
The BRECKWELL Sonora SPI Pellet Stove Insert is both heat and energy efficient. Perfect option for those looking to use an existing fireplace space and cut heating costs. Sidewall to Stove - 12". Front Hearth Clearance - 6".
Pellet Stove Circuit Board Repair Service. I’m also a technician. This is because it takes us longer to test the board and make sure it doesn’t have any problems. “Hi Jason. I had a good experience with you.
Breckwell Pellet Stove Exhaust Motor Blower. Fits The Following Breckwell Models P22, P22I, P23, P23I, P24, P24I, P2000, P2000I, P2700, Big E (P1000) and the P4000 Classic Cast Pellet. “Hi Jason. I had a good experience with you.
Breckwell Pellet Stove Exhaust Motor Blower. Fits The Following Breckwell Models P22, P22I, P23, P23I, P24, P24I, P2000, P2000I, P2700, Big E (P1000) and the P4000 Classic Cast Pellet. Most current Upgrade available for your stove.
Breckwell part# C-E-090-22. Used in the following Breckwell Pellet Stoves If your pellet stove shuts down and displays a POF or #3 blinking light; that could be because one of your limit switches have shut the unit down.
I t is a good practice toreplace those "little trouble-makers" on your stove, even if it does not always solve the main issue. If your pellet stove shuts down and displays a POF or #3 blinking light; that could be because one of your limit switches have shut the unit down.