Vintage Amplifiers and Tube Amps

THIS AMPLIFIER IS BEING SOLD FOR PARTS OR REPAIR.

The amplifier left channel works the right channel does not. There is a problem with the power switch it does not operate smoothly. It is certainly repairable, but I'm up to my ears in audio gear. The amplifier was housed a cabinet and the 4 rubber feet were removed.

These come from the factory using 7408 output tubes and a 5AR4 rectifier. The 5AR4 is so over the top n this application that I used a much more common 5Y3 instead. 7408 are expensive and difficult to source so I subbed in common 6V6’s.

You will receive this Dynaco tube mono amplifier that's in the the picture. It's been tested and works properly.

Called "The Miracle of a $150 or less Tube Amplifier" by the Wall Street Journal! Check out the full review from the Wall Street Journal here Hit the trifecta of sound, style, and convenience with this 25-Watt Stereo Hybrid Tube Amp! The tube preamp stage adds warmth and richness that solid-state circuits can't touch, breathing new life into your digital music. The black and chrome appearance with exposed tubes gives a look of uncluttered simplicity, which looks great in any office, study, or even in the midst of the swankiest cocktail party.

Cosmetically, it is in nice condition with few minor nicks and scratches.

This amplifier is strictly being sold "as is" and for parts or repair only. Picked this up from a friend, who had it sitting in their attic for years. I've never been successful at getting this to turn on or make any signs of life.

The Pioneer SA-606 is a stereo integrated amplifier giving a continuous power output of 40 watts per channel. Integrated Amplifier. Power output: 40 watts per channel into 8Ω (stereo). This item is new in an open box.

Here we have the needed parts for a tube amplifier, made by GRAETZ in the 1958 ies. original worked with EL84 in SE mode. one trannie has a particular missing of pertinax plate, but no problem for use and just opticall, but its a matched pair !

Original worked with EL95 in SE mode. Here we have the needed parts for a tube amplifier, made by Blaupunkt in the 1965ies. What you see on the pics is 100% what you will get.

You are looking at a Sansui A-7 DC Servo amplifier. It is in excellent working and cosmetic condition. The sound is clean and it puts out quite a bit of power. The hardware is solid and this is a really well made unit.

Unit powers on. No further testing was done. Unit has a scuffs and scratches from being moved around. Power cable is included.

Frequency response: 20Hz to 20kHz. Power output: 50 watts per channel into 8Ω (stereo), 100W into 8Ω (mono). Semiconductors: 24 x silicon transistors, 18 x diodes. Speaker load impedance: 4Ω to 16Ω. Signal to noise ratio: 90dB.

ONKYO Integra A-8057. Here is an excellent Onkyo Integra series integrated amp. These are not often available. This one is fully working and sounds great. INTEGRATED STEREO AMPLIFIER.

You will notice there is no power cord. It was cut before I got it.

ESS 200. Stereo Power Amplifier. WORKS PERFECT. DECENT COSMETIC CONDITION ( SHOWS SCRATCHES OFF THE TOP).

Quatre DG-250C power amplifier. All tested and working with excellent fidelity. Rare "Gain Cell" technology. Very high resolution. Open, clear sound. This item is Used.

It is a solid Hybrid amplifier from a technical perspective, the sound with great quality effect, value you own it with such low price. Every ten people buy tube amplifier, eight people choose it！《《《《.

Capeheart 6V6 Amplifier. The amp is freshly pulled from a Capeheart Farnsworth console unit. It looks to be untouched. The tubes are all marked "Capeheart" and the capacitors all look to be original.

Original worked with ELL80 in SE mode. What you see on the pics is 100% what you will get.