Fits and works in Bissell model 3624, however the small T-shaped connector at the end is not the right part for this model and would result in a wet mess if used to connect to the unit's internal water hose. That connector must be removed and the original straight-line connector reused instead in its place. Deducting one star because this is not a true drop-in replacement.
Verified purchase: Yes | Condition: New
Missing the washer at the end plugs into unit, Was ready to do repair, took apart the unit went to install the new hose notice that was very lose where plugs into unit. Compare to old hose notice to washer ring.. Okay thought remove old ring from broken hose. Not washer broke Guess today try hit hardware store to find washer...
Verified purchase: Yes | Condition: New
Getting this item saved me money. The install took a bit more disassembly than I thought but I took my time and all was good. It takes a Phillips screwdriver and small pliers for the hose clamps. About 12-14 screws to get the surrounding shell and top cover off. All screws are the same size so no worries to where they go. Start with popping the cover off the side reel the hose wraps around. Then remove screws around the electrical cord. Remove screws around the surrounding cover and slip it down the electrical cord a little ways. The plastic tube just unplugs with an o-ring (clean that o-ring area and apply a little grease when installing the new hose). Take the top cover to get to the hose tee fitting. Remove the clamps and switch out the tee fitting. When assembling keep note to route the tube with the metal coil sheath in a small hole in the case. Take pictures or video if you are not used to this kind of install. Read full review
Verified purchase: Yes | Condition: New
Perfect fit. Best price I found anywhere. Seems to be good quality, at least as good as the original. More flexible and slightly longer than the original, making it easier to wind around the storage boss and the extra length keeps it from being stretched and splitting the hose at the joint of the attachment wand. Got my spot vac back up and running and kept it out of the landfill. There was a T fitting at the end of the solution hose that needed to be removed to attach to the original fitting. Must be for another model that this item fits. Very happy with this purchase.
Verified purchase: Yes | Condition: New
Excellent replacement, All connections fit perfectly. You will be pleased with the quality of the product. This hose is NOT a cheaply made knock-off.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Vacuum Cleaner Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Vacuum Cleaner Parts