12'x52'.5" Insulated Inground 2-Lane Lap Pool Kit 

THE POOL WALL SYSTEM IS MADE OF POLYSTYRENE FOAM PANELS 48" TALL, 40" LONG, 4" THICK WHICH ARE NUMBERED AND NOTCHED FOR EASY ASSEMBLY IN THE DESIRED POOL DESIGN.

you can build the pool yourself AND/or contract out work you don't want to do (see items 1-9 below). We provide wall panel system, mesh, & equipment for the kit, but you'll have additional costs. We usually figure costs associated w/building the pool kit are to double cost of the kit to calculate the total cost of your pool, which also includes:

1. Excavation (a dig plan is included)
2. Gravel (which needs to be placed and compacted in the excavated area prior to setting walls panels)
3. Plastering the foam panels (with two coats of structural plaster with a polystyrene mesh embedded between the 1st and 2nd coats). The plastered panels need to cure for about 5-7 days and the panels should be sprayed or misted down with water on both sides for the first 3-5 days.
4. 3/4" Pea-gravel for back-fill, which is placed around the outside of the pool in the excavated area (which is self compacting and allows the pool to be in its own environment and helps the pool to be resistant to free active earth movement).
5. Pour a 4" concrete floor and ring-beam around the pool along with the equipment pad
6. A small amount of plumbing and electrical is needed for setting equipment
7. Install pool coping and decking
8. Apply the EVM Coating (roll-on or spray-on) interior finish (and install pool tile border around the top of pool)
9. Installation of pool equipment, establish power to equipment pad.

The following is a list of the additional materials needed for this specific design to help you calculate your other costs:

Depth is dependent on the width of the pool; the wider the pool, the deeper you can make it.  As this is a lap pool, with this particular design you can build it with a standard depth of 4-1/2 feet.

With our Pool Kits, we can supply you with all the components you need to build a pool, spa or spool; we’re always here for technical support.  We have excellent construction and technical consultants available to answer any questions. Contact us by phone at 800-348-6916 or e-mail.  Our staff is available between the hours of 7 AM to 7 PM Pacific Standard Time.

SEE ADDITIONAL CHECK-OUT INSTRUCTIONS BELOW FOR INFORMATION ON U.S. FREIGHT AND SHIPPING.

U.S. Freight and shipping is included in cost of item. Anticipated delivery is 10-14 days.  For Buyers outside of U.S., Buyer needs to make arrangements from U.S. Port to final destination.  Seller will ship to closest Port of Entry/Exit and Buyer will need to make arrangements for container and shipping from U.S. Port to final destination Port.  Shipments outside of U.S. will take longer.