*Estimated delivery dates include seller's handling time, and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the shipping service selected, the seller's shipping history, and other factors. Delivery times may vary, especially during peak periods.
A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
Items shipping internationally may be subject to customs processing depending on the item's declared value.Sellers set the item's declared value and must comply with customs declaration laws.Buyers may be subject to additional charges for customs clearance.Visit eBay's page on international trade- opens in a new window or tab.
International Shipping - items may be subject to customs processing depending on the item's declared value.Sellers set the item's declared value and must comply with customs declaration laws.As the buyer, you should be aware of possible: - delays from customs inspection. - import duties and taxes which buyers must pay.- brokerage fees payable at the point of delivery.Your country's customs office can offer more details, or visit eBay's page on international trade- opens in a new window or tab.
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab... Read moreabout the condition
IF INTERESTED IN A 1 GALLON OR 5 GALLON KITS PLEASE SEND US A MESSAGE AND WE WILL SEND YOU A PAYPAL INVOICE TO YOUR EMAIL ADDRESS.
1 GALLON KITS (16 LBS): $70.00 + $27.00 SHIPPING TO THE LOWER 48 STATES ONLY
5 GALLON KIT (80 LBS): $240.00 + $90.00 SHIPPING TO THE LOWER 48 STATES ONLY
Liquid Polyurethane Foam, 2# Density. (Density refers to the
weight or pounds per cubic foot (PCF) of expanded foam 12" x 12" x
12")
This 4 Lbs Kit consists of one (1) Quart of Part A and one
(1) Quart Part B. The total yield is 2 cubic feet, which will float almost 120
pound of dead weight.
This closed cell foam expands to almost 25 to 30 times its
original volume. SSK-8102-HT is designed as an insulation foam for use in motor homes, in your house, and void filling in concrete block buildings. Some
people use it for insulating ice chests and spas. This product is also ideal
for adding flotation and added strength to any sailboat, motorboat, canoe,
kayak, Jon boat, runabout, or pontoon boat. It also makes good architectural
castings, and can be used to support unusual structures including bathtubs and
spas. It also has many uses for special effects.
To use, mix a small amount of each component together and then
pour into any cavity that is needed to fill. Within a few minutes it will rise
and cure. Once fully cured (24-48 Hours) this foam can be laminated over with
any type of polyester, epoxy or vinyl ester resin without melting. This product
can be poured in multiple layers with excellent bonding between layers. All
expansion rates and times given are temperature critical. Temperatures below 75
degrees F will lower the expansion rate therefore requiring more foam. Ideal
working temperature is 75 to 80 degrees F or above. Accurate measuring of these
products is critical. Working time before foaming: approx. 45 seconds Time before
full expansion: approx. 5 minutes
Packaging
may vary from picture due to shipping requirements.
TECHNICAL DATA FOR SSK-8102-HT
SSK-8102-HT is rigid closed cell
polyisocyanurate foam. Its increased insulating efficiency compared to
competitive insulation's, offers better process controls and yields and
therefore, substantially better upgrades in strength, durability, moisture
resistance and a lower installed cost when compared to other insulation
materials.
SSK-8102-HT
meets or exceeds all of the requirements of MIL-P 21929 except ASTM D-471,
which does not apply to SSK-8102-HT and ASTM D-2341, which has recently been
withdrawn from the specification. Also, SSK-8102-HT is available in a version
that will conform to the ASTM E-84 standard of MIL-P-21929.
SSK-8102-HT provides exceptional values at continuous service temperatures of
–1500 F (-1000 C) to +2000 F (+930
C). SSK-8102-HT is only available as a liquid system for pour-in-place or “in
situ” applications. The physical and chemical properties of SSK-8102-HT are
shown below.
PHYSICAL
PROPERTIES *
Property
ASTM Test
Method
Result Density, pcf (kg/m3)
D-1622
2.0(32.0)
Compressive Strength, psi (kPa)
D-1621
Parallel to
Rise
25
(173)
Perpendicular to
Rise
18
(124)
Tensile Strength, psi
(kPa)
D-1623
Parallel to
Rise
43
(297)
k-Factor, BTU-in/hr-ft2-0F
(W/mK) C-518-91
Initial
0.121(0.017)
Aged 180 days @ 750 F (240
C)
0.161
(0.0232)
Closed Cell Content, % D-2856
93
Water Absorption, psf (g/cm2)
D-2842
0.05
(0.027)
Water Vapor Permeability, Perm-in (ng/Pa-S-M) E-96
3.0(4.5)
Dimensional Stability, %
Change
D-2126
Dry Cold,-200 F (-300 C), 7
Days
Length
-0.1
Volume
-1.8
Dry Heat, 2120 F (1000 C), 7 Days
Length
+1.0
Volume
+3.3
Humid Age, 1580 F (700
C), 100% R.H., 7 Days
Length
+2.3
Volume
+6.8
Service Temperature, 0 F
(0 C)
Continuous
-1500 F (-1000 C) to + 2000 F (+930
C)
Reaction Profile, @ 770 F (250
C)
200 gram Lab. Hand mix, 3000 rpm mixer
Start of
Rise
20-60 secs.
String
Gel.
75-210 secs.
Rise
Time
100-270
secs.
Free Rise
Density
2.0 pcf (32.0 kg/m3) Nominal
*The
physical properties of the SSK-8102-HT were determined by processing the
chemicals through a low pressure, high shear mix machine.
Chemical temperatures were maintained at 900 F ( 320 C)
for the A component and 800 F (26.50 C) for the B
component. Box pours measuring 24” x 24” x 24” ( 61cm x 61 cm x 61 cm) were
made. The resulting foam was cured at room temperature (approximately 700
F or 200 C) for thirty days. Testing was done on core samples cut
from the box pour. 1This numerical flame spread rating
is not intended to reflect hazards presented by this or any other material
under actual fire conditions.
Non-Warranty: This information is furnished without warranty, expressed or
implied, except that is accurate to the best knowledge of SSK The data on these
sheets relates only to the specific material designated herein. SSK assumes no
legal responsibility for use or reliance upon this data. The user should
conduct sufficient investigation to establish the suitability of any product
for its intended use.
Questions and answers about this item
No questions or answers have been posted about this item.
You can add ##n## more item.You can add ##n## more items.You’re the first person to watch this item. Don’t let it get away!people are watching this item. Place a bid and beat them to buy this item!##n## item can still be added to your watch list.##n## items can still be added to your watch list.person is watching this item. Place a bid and improve your chances to buy this item.(##i## item)(##i## items)
Back to home page
) 
