Plans:How 2 Wind turbine generator prop blades for $10

HOME WIND EXPERIMENTERS: YOU ARE GOING TO LOVE THIS MANUAL! This auction is for a manual that includes plans, pictures, and instructions to allow you to make your own props for around $10 each in as little as an HOUR's time!!! Blades can be made with this novel idea quickly and easily by almost ANYONE! Make a two, three, four or more blade prop. No precision work involved. Simple hand tools only. NO CARVING because it is not wood. And no, this is not for some heavy, dangerous sheetmetal contraption! The plans include a template to make a sample blade for a servo motor generator and then shows you how make the blades to custom specs that will work with almost any generator/alternator you are using. The props built with this cool technique are light, weatherproof, strong, efficient, and good looking. Lots of us like to experiment with wind energy, but having blades carved costs tons of money or takes weeks and lots of skill. Then, what if you don't like the specs and need more torque or speed for your generator? NOW, you can make several blades and interchange them to find what works best. For just a few bucks, you can add a blade to a 130 volt servo motor you can find on E-bay and have a wind genny making power for your home or shop. At this cost, you can have a whole fleet of gennys producing. I have put a power-producing generator in the air for around $30 total! You will love this novel concept to produce the toughest part of the wind genny, but you also get plans to make a anemometer for under $25 and a blade tachometer for under $15, so you can measure the success of your experiments! Have fun, make power, AMAZE your friends!