|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
Click to Enlarge
|
PLEASE CHECK OUT OUR OTHER LISTINGS FOR SIMILAR ITEMS!!!
NEW SAMSUNG / GVI PH3512HB with FAN & HEATER (24Volt) SECURITY CAMERA IP66 outdoor HOUSING. SET of Housing & Bracket, NEW BULK PACKED!
BRACKET is INCLUDED with the housing.
This weatherproof housing can hold almost any major brand box cameras that are up to 9" in Length.
Bracket is included.
See our other listings for housing and bracket kits, DVRs, Cameras etc.
Product Overview:
This low cost IP66 housing is designed as a medium sized environmental enclosure. It can accommodate all CCD cameras with a length no greater that 9". Constructed of extruded aluminum and equipped with a hinged, latching cover, this housing serves well for general surveillance applications.
Equipped with a removable sled the cameras can be set up, adjusted and then re-mounted in the housing. The front cover hinge makes adjustment and service to the camera very accessible.
Features:
- Indoor/Outdoor applications - IP66
- Adjustable position bracket mount
- Extruded Aluminum Construction
- Gasket protected cover
- Stainless Steel Latch
- Glass window
- Heater/Blower
Features:
| Viewing Material |
Plate Glass 5mm, 0.2" |
| Construction |
Extruded Aluminum |
| Cable Entry |
Gland fitting on bottom of housing |
| Latch |
Located at rear of housing. Accepts padlock for security |
| Camera Mounting |
Removable camera sled |
| Weight |
3.52kg, 7.76lbs |
| Dimensions |
(D) 390mm,15.35" x (W)140mm, 5.51" x (H) 115mm, 4.53" |
| Maximum Camera Size |
(D) 240mm, 9.45" x (W) 105mm, 4.13" x (H)
80mm, 3.15" |
| Heater/Blower Module |
24VAC, less than 10 VA |
| Temperature Activations |
Heater |
On: Less than 15°C / 59°F |
| Off: More than 25°C / 77°F |
| Maximum Current Draw: 900 mA |
| Average Current Draw: 350 mA |
| Fan |
On: 35°C / 95°F or more |
| Off: Less than 25âºC / 77°F |
| Average Current Draw: 150 mA |
| Bracket |
GV-Bracket,
Metal Bracket
|
Material: Aluminum |
| Length: 240mm (9.45") |
| Max Load: 10kg |
| Swivel Angle: 360⺠|
| Tilt Angle: -80⺠~ +45⺠|
ONE BID IS FOR ONE unit as shown on the pictures!!!
GENERAL TERMS:
- TelNetLiquid LLC is dedicated to earn your business by better
servicing your needs regardless of your budget size. If other folks can
do it, chances are, we can do that too but even in a BETTER way.
- Thus, if you require a special order quote or custom built
system, please call 1-443-854-5382, so we can setup a customized eBay
listing for the specific system based on your needs.
SHIPPING TERMS:
- Ground UPS is the default shipping mode for the DOMESTIC orders being shipped within the 48 Contiguous United States.
- We do not ship to PO boxes or APO/FPO.
- Additional Shipping Fees apply for packages going to Alaska or Hawaii.
- PayPal Confirmed Addresses must be provided if order is paid via PayPal.
- We do strive to ship the orders ASAP (in most cases same or next day). But please allow up to 3 business days for your order to be processed and shipped.
- Tracking info will be sent to the email address listed with your PayPal payment once the order ships out.
- TelNetLiquid LLC ships ALL OVER THE GLOBE regardless of the size and the weight of the order, please email us for a CUSTOMIZED QUOTE.
PAYMENT TERMS:
- PayPal Payments - Credit cards and e-check payments are accepted through PayPal. TelNetLiquid LLC is only authorized to ship to addresses confirmed on the buyer's PayPal account.
- Your order will be shipped to the address listed with your PayPal payment.
- All orders must be paid in full within 48 hours of the auction end .
- INTERNATIONAL ORDERS for amounts exceeding $1000 should be paid via bank transfer unless other arrangements have been done prior the auction end.
- INTERNATIONAL BUYERS are responsible of paying CUSTOMS/DUTIES/BROKERAGE FEES
in accordance with their country and local laws, such fees are usually
billed separately by the carrier and are due upon cargo/package arrival.
- TelNetLiquid LLC reserves the right to cancel any suspicious transaction.
- Maryland Sales Tax of 6% will be charged to all orders shipped to Maryland addresses.
WARRANTY TERMS:
- Many of our products sold are pre-owned or refurbished unless otherwise stated.
- All hardware purchased from TelNetLiquid LLC comes with 7 day DOA (Dead On Arrival) warranty unless otherwise stated.
- Customers have 7 days after order arrives to notify TelNetLiquid
LLC in writing if they would like to return the product(s) for exchange
due to hardware failure.
- Replacement will be provided for failed items under DOA warranty.
If no replacement is available, customer will be granted the refund for
the failed component (if the component is a part of the system or a
bulk order, the amount of the refund would be calculated on prorated
basis).
- We sell hardware ONLY, and DOA warranty covers hardware failure only. Therefore any software, licensing, password or compatibility issues are not covered by our DOA warranty.
- Compatibility for particular use or for use with other hardware
must be researched by the buyer prior to purchasing the item.
Compatibility issues would NOT be covered under DOA warranty.
- Buyer is responsible for return shipping costs and insurance, in case of RMA, Warranty Repair or Return for Refund.
- A Return Material Authorization (RMA) number must be obtained for
all returns.
  inkfrog terapeak
i000000
|
Back to home page
BPum,l1(Gw~~60_39.JPG)
E7swBPum,sM7mg~~60_39.JPG)
) 
