|
Visit our eBay Store for more green energy products!
|
 |
 |
 |
 |
   
|
 |
GreenergyStar Grid Power II 400W
For Solar & Wind Hybrid Systems
2nd Generation Grid Tie Inverter
What is a Micro Grid-Tie Inverter?
First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility's electricity network (the power grid).
As of today, most inverters available in the market are in the high output (1000W ~ 5000W) category. Their prices ranges in the thousand's range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables.
Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. All that has to be done is connect your DC Sources (Solar Panels or Wind Turbine) to the inverter, and use the included cable (North American standard) to connect to any home AC electrical outlet, and you are feeding/selling green energy back into the grid at a premium rate (subject to local policies). This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free.
In addition, our inverters are stackable; meaning multiple unit of these devices can be connected in parallel to generate a higher output.
It is up to us. Up to this generation. To lead mankind into a greener future. |
 |
|
Non- Reusable Power being consumed today
|
 |
|
Reusable Power being generated for a better tomorrow and a brighter future |
What's New in the 2nd Generation?
So you ask, "What's new in this second generation?". Well, there are number of upgrades in performance, safety and display that are not available in the first generation or other inverters in the market. We will use our Enviro-Techs SSI-200W first generation inverter as the base model for comparison. Here are the high lights:
Performance:
|
|
| |
Power |
Dimension |
Weight |
| SSI-200W |
250W |
152 x 143 x 57 mm |
1.20kg |
| GP2-400 |
400W |
163 x 154 x 57 mm |
1.27kg | | - 400W, 60% enhanced in Power Output- 38.5% better in Space Utilization
- 51% better in Weight Reduction with smaller and higher quality parts | |
Display:
Safety:
New Model: GP2-400 (30A External Fuse)
|
- External 30A Fuse for easy maintenance
-Utilizing low resist DC input circuit to increase efficiency.
- Reverse Polarity protection
- Buzzer will alarm when fuse need to be replaced
- Reduce internal temperature |
Old Model: SSI-200W (Internal Fuse)
|
- Hard to maintenance
- Need to remove knobs and remove bottom plate
- Heat generated by the fuse will stay inside the inverter | |
Automatic AC Voltage & Wider Voltage Range for DC input :
New Model: GP2-400 (Automatic Voltage Switch)
|
- Automatically Switch between 110V ~ 220V AC
- Compatible with grids from ANY countries.
- No more manual switch
- Avoid unit being damaged because of human mistakes
- Cleaner User Interface
- Wider DC Input Voltage Range 10.8V ~ 28V
- Allow MORE types of power source to be connected (ie: Air-X, 12V Battery, and etc) |
Old Model: SSI-200W (Manual Voltage Switch)
|
- Easy to be overlooked and cause damage to inverter
- Can be troublesome when there are multiple units
- Narrow DC Input Voltage Range 14V~ 28V
-14V is a range that is too high for starting wind turbines, and half charged 12V batteries | |
|
Feature:
- Grid-Tied - sell green power directly back to the grid at a premium rate (depends on your location)
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- 60% enhanced in power output compare to first generation inverters
- 38% better in space utilization and 51% better in Weight Reduction with higher quality parts
- Unique and intuitive LED display design to reflect power output rate
- External 30A Fuse for easy maintenance
- Automatic 110V - 220V AC voltage switch, NO MORE manual hassle
- Wider DC Input Voltage Range, from 10.8V ~ 28V compare to 1st generation's 14V ~ 28V
- Allow MORE types of power source to be connected (ie: Air-X, 12V battery, and etc.)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Stackable (connect in parallel for higher output)
- Island protection: Inverter will shut down during black outs.
- Simple and safe installation
- Reverse polarity protection
- Generates pure Sine Wave
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Does not require rewiring of existing electronics
- Compact and light weight design
Installation:
 Figure 1: AC Power |
 Figure 2: DC Input |
- Install in a low humidity and well-ventilated area. Remove all flammable objects.
- Connect the Solar Panel, Battery or Wind Turbine's DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads
- Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1.
Warning!
Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. |
Electrical Specifications - Output:
| |
Mode |
GP2-400 |
| |
AC Output Power |
400W |
| |
Maximum AC Output Power |
100 ~260V Auto Switching |
| |
Frequency |
46Hz - 65Hz |
| |
Total Harmonic Distortion (THD) |
<5% |
| |
Power Factor |
0.99 |
| |
Island Protection |
Yes, inverter shuts down during black out |
| |
Output Current waveform |
Pure Sine Wave | |
Electrical Specifications - Input:
| |
DC Input Voltage (Solar & Wind) |
10.8V - 28V |
| |
Peak inverter efficiency |
92% |
| |
Over-current protection |
30A |
| |
Reverse Polarity Protection |
Yes |
| |
Power consumption (Standby) |
0.9W |
| |
Stackable |
Unlimited as long as it doesn't exceed main circuit amperage limit | |
Mechanical Specifications:
| |
Operating temperature range |
-20'C - 65'C |
| |
Weight |
1.27kg
2.65lb |
| |
Dimension (L x W x H) |
16.3 x 15.4 x 5.7 cm
6.3" x 6.10" x 2.25" |
| |
Mounting |
Wall Mount at base |
| |
AC Cable Length |
1.5m |
| |
Cooling |
Convection cooled with fan |
| |
Display |
1 Red and 6 Green LED | |
What are included:
- One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter
- One spare 30A fuse
- One 1.5m North America Standard AC Cable
- Instruction Manual
Warranty:
We will warrant this unit against any manufacture defects or workmanship for 6 months from the date of purchase. This limited warranty specifically excludes damage caused by improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer.
|
|
|
|
View our other grid tie inverters:
 | | NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND
|
| Terms & Conditions |
Bidding this auction means that you agree with the following terms & conditions.
All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors. |
Payment |
Total payment = winning price + shipping & handling
Insufficient payment will be charge extra US$0.50 to compensate the Paypal penalty fees. |
Shipping
&
Handling |
Regions
|
Base S&H
|
Combine S&H
( for each additional item ) |
USA(48 states)
|
US$ 19.99 |
N/A |
Canada West
(BC/AB/SK/MB) |
US$ 19.99 |
N/A |
Canada
East/North/Center |
US$ 19.99 |
N/A |
Worldwide
by Xpress post |
US$ 49.99 |
N/A |
| USA (Hawaii & Alaska) |
US$ 19.99 |
N/A |
Total shipping = Base S&H + Combine S&H ( for each additional item )
a) Charge the highest shipping cost for the first item.
b) No combine shipping.
1. Combine shipments are only available on the condition of a SINGLE PAYMENT. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
2. We ship within 48 hours after payment is received and confirmed. Please allow up to 5-10 BUSINESS DAYS for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
4. We are not responsible for any loses or damages resulting from shipping. |
Return & Refund Policy |
- No refunds after 30 days
- Shipping & handling & other service fees are NOT refundable
- All returned items must be in original packing.
- Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
- A 20% restocking fee will be charged on all refunded items.
|
E-mails
|
- E-mails are usually answered within 2~3 business days in priority order.
- Spams and mass e-mailing will be deleted without slightest glance.
- E-mails with virus or anything subjected to hacking are automatically deleted.
| |
| |
Back to home page
) 
