New 600w solar panel/wind grid tie inverter DC 14-28v/ AC 110v,free shipping-US

3RD GENERATION 600W GRID TIE INVERTER.

This year, POWER JACK bring you new function as follows:

A. SURGE PROTECTOR:

sometimes, if you are using some heaving appliance like motor, enginee, cause the voltage up down very fast,

in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge

protector will cut down by itself to protect the grid inverter.

B. lightning protection:

you may have experience, when meet the big lightning, the power source of the home appliance may damage,

same reason, will also cause the inverter damage, in this moment the lightining protection can release

thousand voltage to protect the inverter not damage.

C. HIGH SPEED AC FUSE:

now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1mini/sec, to make sure high voltage spike come in!

Power Jack alaways bring your life convenience,

let's enjoyed the green word!

600W GRID TIE INVERTER

Input 14V-28V DC

Output 110V AC

feature:

1. power jack grid tie inverter is designed for small solar panel & wind energy market, it's suitable for family enengy system.

2. this inverter can directly use solar panel, wind charger through inverter to home grid.

3. easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid.

note: this inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for 12v dc source,but you can connect 24v battery,if you want to use solar panel,pls be make sure the load and no load of the solar panel must at the range of the voltage of the inverter ,and if you want to connect the wind turbine,pls be also connect with wind controller,for further questions, pls leave message to ask, tks.

1.idea for power jack

The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid's, and the volume will be higher than the grid's, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on.

2. why use power jack grid tie inverter?

when you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances)

3. difference of power jack grid tie inverter

traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it's own MPPT, can make every solar panel got the max power.

4. island protection

power jack grid tie inverter has 3greens light, when the charge fucntion is normal, then this 3lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter.

HOW TO INSTALL

1. when you set up the grid tie inverter, pls put the AC plug first, after plug into the home ac source, don’t remove the plug anymore,other wise, it may have high voltage spikes ,then connect the dc input

2. when you want remove the grid tie inverter, please take away the dc input first, then you can remove the ac plug, tks.

Output Power

600W

Output Wave Form

PURE SINE WAVE

DC Input Voltage

DC 14Volt – 28Volt(solar/wind panel)

AC Output Voltage

AC 110v

Frequency

Efficiency

87%

No Load current Draw

0.7A

Distortion

2%

Temperature Protection

55C ± 5

Weight

2.0 kg

Warranty