Decorative Privacy Window Film White Pattern 9 Feet 

3. Position the film on the desired spot and remove the backing paper gradually.
Hint: Use two pieces of adhesive tape at top corner to start separation of the backing from the film.
Backside is separated easily.
Be careful not to get any air bubbles between the surface and film as you press down from the center to outer edge.

4. Rub it with soft clothe from the center of the film with outward motion.
Remove any air bubbles trapped during installation.
Use a smoothing tool to push out the bubbles and water.
May pierce air bubbles in pin.
Remove any excess film around the edges with a razor blade and ruler.