| | |
|
NEW! eBay shopping cart Shop, compare and buy several items at once with your shopping cart. |
|
Item specifics | ||||||||
|
DIY Wind Turbine Package for DIY Wind Turbine Plan with 10.6 Feet Diameter Blades Recommended for 1500 watts and up generators depending on generator design and system configuration Free "ready-to-use" heavy duty 210 amp capacity rectifier and AC output Connection kit included - $50 value If you have not already....You need to buy and read this book first: Detailed AC Output Connection Instructions included in the package The package includes:
Technical Specifications: Super strong and durable magnets: 2" x 1" x 0.5" Thick Neodymium NdFeB Block Magnet, Epoxy+Nickel+Copper+Nickel Quadruple Layer Coated Grade Makes a big difference ! The higher the grade, the stronger the magnet N42 grade vs. N35/N38/N40 N35 is the lowest NdFeB neodymium magnet grade on the market, we don't carry N35 grade due to its lower performance making our N42 grade the better value. N38 and N40 are lower grades compared to N42. Coating Makes a big difference ! Hugh Piggott talks about wind turbine failure caused by magnet corrosion due to bad coating in his book: "........ the magnets themselves that can lead to a major failure in under 5 years............. Once the protective plating on the magnet is punctured, the magnet corrodes and swells gradually." Nickel + Copper + Nickel 3-layer coating vs. Epoxy single layer coating Epoxy single layer coating is THE LEAST durable coating from our experience.Nickel + Copper + Nickel 3-layer coating is much more durable than Epoxy single layer coating because Epoxy single layer coating is thin and quicker to wear off, even a scratch can damage the coating easily. Epoxy+Nickel+Copper+Nickel 4-layer coating vs. Nickel+Copper+Nickel 3-layer coating Nickel+Copper+Nickel coating provides protection against moisture and oxygen but is prone to corrosion in salt and acidic conditions. The combination of Epoxy and Nickel+Copper+Nickel coating is the best solution against both corrosion in salt, acidic conditions and moisture, oxygen. We recommend Epoxy+Nickel+Copper+Nickel coated 2x1x1/2 magnet due to the superior Corrosion Resistance and excellent adhesion to metal surface of Epoxy+Nickel+Copper+Nickel coating than Nickel+Copper+Nickel coating. In summary, Epoxy + Nickel + Copper + Nickel 4-layer coating is the most durable and most effective magnet coating. Nickel + Copper + Nickel 3-layer coating is less durable than Epoxy + Nickel + Copper + Nickel 4-layer coating. And Epoxy single layer coating is the LEAST durable coating for neodymium magnets. Magnetized through the Thickness 0.5", poles are on the two 2x1" surfaces Approximate pulling force: 72 lbs BrMax: 13200 gauss High Efficiency, Light Weight, Load Balanced, Reinforced Fiberglass Commercial Wind Turbine Rotor BladesClick here for features of high efficiency blades Please specify the magnet wire size from 13 AWG to 24 AWG in the comment box. ![]() |
Questions and answers about this item | |||
|
Domestic handling time | Estimated sales tax |
|---|---|
Will usually ship within 3 business days of receiving cleared payment- opens in a new window or tab. | Seller charges sales tax for items shipped to: TX*(8.25%) . * Tax applies to subtotal + S&H for these states only |
After receiving the item, contact seller within | Refund will be given as | Return shipping | Return policy details |
7 days | Money back | Buyer pays return shipping | You may return purchased products within 7 days of purchase. You will get a refund for returned products if they are in original condition.
ALL RETURNS ARE SUBJECT TO A 20% RE-STOCKING FEE.
We do not accept returns if returned products are not in the original condition. We don't accept returns for used or damaged products. |
| Payment method | Preferred / Accepted | |
|---|---|---|
![]() | PayPal Preferred | |
Accepted |