600w wind generator/200w solar panel Multi-controller

Feature:

1.600w wind turbine PWM System Controller

2.200w solar panel PWM System Controller

3.Battery charge control

4.2 way DC output

5.Can use grid tie inverter together

This is a smart design for solar panel and wind turbine control system, you can use solar panel and wind turbine at the same time, so here is following details:

1. 600w wind turbine PWN System Controller: 

Specification:

Watt: 600w

Input: 0-70V 3 phase AC or DC 0-70V

DC output(for battery): 24V

DC floating Voltage: 27.2V

Low voltage input alarm:  Yes

Over charge protect:Yes

Low voltage protect(for battery): 21.6V

High voltage protect(for battery): 27.5V

Wind turbine on/off control:

Before setting,turn to (BRAKE)

After setting, ready to go,turn to (RUN)

2. 200W solar panel PWM System Controller:  

Max watt: 200w for solar panel

Input: 28V-36V(for 24V solar panel)

DC output: 24V for battery

DC floating voltage:27.2V

Low voltage input alarm:  Yes

Over charge protect:Yes

Low voltage protect(for battery): 21.6V

High voltage protect(for battery): 27.5V

3. Battery charge control:  

Rated Voltage: 24V

Max input voltage: 28V

Overcharge: Protection：28.8±0.2

           Resume: 27.2±0.2

Overdischarge: Cut-off: 21.6±0.2

             Resume:24.6±0.2

Overload:  Cut-off:33.0

          Resume:30.0

4. 2 way DC output 

First DC output is 24V

Second DC output is also 24V, but has timing control, Max hour is 15 hours