New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
See all condition definitions- opens in a new window or tab
... Read moreabout the condition
These Tungsten Carbide Grit Edge Serrated Holesaws are a True
They are the exact same product
we Wholesale Worldwide to Tile Stores and Hardware Stores under either our name,
there name or various product names so be assured you are getting the same
Quality Product Here that we sell everywhere.
This Hole Saw fits a 5/8" thread Mandrel - i.e our A2
or A2 SDS Mandrels / Arbors with TCT Pilot Drill.
Other items available for use with this hole saw include
12" Mandrel Extension for Deep Bore Holes and Replacement TCT Pilot
We have many more sizes of Tile Drills and Hole Saws available in Our Ebay
Store from 1/4" (6mm) to 6" (152mm)
The Gulleted Edge is coated with a Permanently Bonded
Tungsten Carbide Grit. The Gulleted Edge increases cutting pressure and allows the cut
material to be removed .They are designed to take serious abuse and will outlast any
conventional Hole Saw, they can be used in corded or cordless Drills and even SDS
Drills and are built and designed to cut both with or without Full Hammer Action. They
can even cut in both directions, they have a high heat and abrasion resistance, they
are much tougher than Bi Metal Hole Saws and they have no teeth to chip or dull like
Regular and even Carbide Tipped Hole Saws.
These Holesaws leave a fine finish and can
cut through tough abrasive materials like Brick, Masonry, Slate, Marble, Ceramic Wall
Tiles, Siding, Hardie Board, Construction Materials such as Autoclaved Cement Board,
Fibre Glass, Composite Boards such as Chipboard and MDF, Laminates, Rubber Tires Tyres,
GRP, CFRP, Hardwood Flooring, Laminate Flooring, Plasterboard / Drywall, Soft Resinous
Woods and Hard Brittle Materials. Great for Boat Building.
Blades Can be reversed and wire brushed
clean to increase life span.
Applying water to the cutting edge whilst running
with squirty bottle will
minimize dust and keep the cutting tool cool and increase the life span of the cutting
Important Keep Water and
fluids away from Electrical Tools and Devices!!!
Always wear Safety Glasses when Using Any
Many of the applications that these saw blades are used
for would bind and load up, or wear out the teeth on traditional toothed
These Tungsten Carbide Grit edge HoleSaws
are currently available in Kits and individually in a wide range of sizes
This Hole Saw will fit any standard 5/8”
thread Mandrel / Arbor But our A2 & A2 SDS Mandrels are fitted with
a TCT Pilot Drill for Drilling Holes in Masonry and Tile etc., we also have Special
5/16" (7.5mm) TCT Spear Point Drills that double as Pilot Drills for these
Mandrels in our store for better centering when cutting Holes in Ceramic Tile - All
available in our Mandrel / Arbor section.
Always use Pilots that
are TCT (Tungsten Carbide Tipped) After All What’s the point having a
Hole Saw that can cut through Brick and Tile if the Pilot Drill Cannot?
is an Arbor / Mandrel?
A: Some people call it a Mandrel and some
call it an Arbor, this is the device that you put in your Electric Drill and the Hole
Saw attaches onto it, it has a Pilot Drill that starts drilling before the Hole Saw
reaches the material in order to center it and steady it, Pilot Drills are usually HSS
High Speed Steel Not Ours though, we have 2 Types , we have TCT Tungsten Carbide Tipped
which looks like a regular Drill but there is a Piece of Solid Tungsten carbide in
a Pentagon shape slotted and welded into the point, this allows it to be used with or
without a Hammer Drill and cut through tougher materials like Brick, we also have Spear
Point Tile Drill Pilots- these are unlike any other drill they have a solid Spear
shaped large piece of Tungsten carbide slotted into the point, they are specially for
cutting through Tile or Glass as they slowly expand the hole as they drill exerting
smaller amounts of pressure than a regular Pilot Drill making them suitable for brittle
materials like Ceramic Tile & Glass etc.
Q: Which Mandrel / Arbor do I
A: For this size Hole Saw and any
Holesaw 1 1/8" (29mm) or less you need what we call an A1 or A1 SDS Arbor /
Mandrel, it has a thread size of 1/2" which is a standard size this will also fit any
other hole saw you own or buy in the future whether its one of ours or not, we have a
few options the first consideration is the type of Electric Drill, if its a regular
Drill with a regular chuck then the regular A1 TCT Mandrel / Arbor is fine - This has a
TCT Pilot Drill which is replaceable and it has a 3/8" Hex Shaft for gripping in your
Drill, if you are Drilling Tile though you may want to get a Spear Point 7.5mm
Tile Drill and it will fit any of our Mandrels / Arbors Both 3/8" Hex shaft and
If you have an SDS Plus Drill then we have
SDS Mandrels also - This also has a TCT Pilot Drill which is replaceable but instead of
having a 3/8" Hex Shaft it has an SDS Plus shaft for gripping in your Drill, the
Mandrel / Arbors have slots milled into the spline to enable them to slide into an SDS
Drill chuck for quick Drill changes.
Don't worry though If you dont know what
SDS is - You have not got one!!
Q : Are the Pilot drills Replaceable?
A: Yes all TCT Pilot Drills and Spear Point
Pilot Drills are replaceable, by means of a hex screw and replacements are
always available here in our Store.
Q : What if I want to Drill a Hole
Deeper than the height of the Hole Saw?
A: Simple - go to our Ebay Store and
purchase the Mandrel / Arbor Extenion, this fits onto the 3/8" Hex shaft of our A1 and
A2 Mandrels , then you drill as far as you can, remove the hole saw from the hole and
break out the core then just keep doing the same thing until you are
Q: How Long will the Hole saw last?
A: We expect to get 30-40 holes at least out
of each Hole saw, obviously depending on the material and how you look after the tool,
but don't worry if you do manage to wear them out completely we always have product in
stock so even on the hole saw kits you do not have to replace the whole kits we sell
all sizes individually.
A couple of tips to get the best out of the
blades, some of these are obvious but you would be surprised.
1. Always double check the Pilot Drill
is firm and tight and check it with a Hex / Allen Key - if it spins you will obviously
just sit in the same place grinding the grit off the hole saw.
2. If Drilling Masonry items like Brick and
Concrete always use the Hammer Drill Setting so it clears the debris from the hole.
Keep the hole saw as cool as you can by dipping in water and allowing it to cool
3. If drilling Deep Holes - break the core
out as you go or you wont get anywhere.
Screw the hole saw down as tight onto the threads as possible and lock the pins in
place all the way in on the larger mandrels. Keep an eye on the locking pins so they do
not back off with the vibration etc, the pins are not designed to be used
extended that will put a huge pressure on them and may cause them to snap.
I use a rubber band placed behind the locking wheel -
this prevents it backing off if I am not watchng etc.
Q: Will Tungsten Carbide Cut High
Density Ceramic, Porcelain and Granite ?
A: No but our Diamond Range will cut
Porcelains Granites and High Density Floor Tiles.
So Who uses our Tungsten Carbide
Hole Saws and other Saw Blades?
Plumbers, Electricians HVAC Engineers
and Installers, Boat Builders, Professionals DIY and Remodellers, Tile Installers,
Construction Workers, Engineers, , Air Conditioning Engineers, Kitchen Fitters, Masons,
Composite Manufacturers and users such as Fiberglass and Auto Body Kit
Manufacturers, Component Testers, Aerospace Industry, Graphite Industry,Insulation
Manufacturers, Woodworking, Fire Brigades, Computer Case
Thanks for looking and Please check
our Ebay Store we have Many other Amazing Products
Jigsaw Blades, Reciprocating Saw
Blades, Mandrels / Arbors, Rod Saw Blades, Hacksaw Blades, The Amazing Tile & Glass
Super High Quality Tile &
Glass Drills, Grout Rake, Tungsten Grit
File, High Quality Diamond Hole Saws, Tungsten Carbide Hole
Seller charges sales tax for items shipped to: FL*(6.5%).
* Tax applies to subtotal + S&H for these states only
After receiving the item, contact seller within
Refund will be given as
Buyer pays return shipping
Return policy details
Returned goods must be in unused condition, goods will be checked for any faults and if found faulty all shipping will be paid for economical return once return is approved. Actual shipping costs will be deducted at cost from initial purchases wether shipping was included in sale price or not.
There will be a restocking fee of 10% plus shipping cost of any goods returned to cover shipping handling and administration.
Preferred / Accepted
Put time on your side.
Choose PayPal Credit to pay for your purchase when it's right for you.
The choice is yours. PayPal Credit gives you the flexibility to pay for your purchases now or over time with one of our special financing offers. Please note, if your purchase qualifies for a special financing offer:
Interest will be charged on your account from the posting date (which is usually within a few days after the purchase date) if the purchase balance is not paid in full within financing period. Subject to credit approval. See terms - opens in a new window or tab
Visa/MasterCard, Amex, Discover
Seller's payment instructions
Payment can be made through Paypal, with or without an account, via Credit Card through Propay, if you prefer to pay over the Telephone simply call Direct 1 352 694 7900
Current bid amount
+ import charges (shown at checkout)
time left##2## left|Bid Count
Current Max Bid:
Your bid amount:
Calculating import charges...+ import charges (shown at checkout)
By placing a bid, you're committing to buy this item if you win.
By submitting your bid, you are committing to buy this item from the seller if you are the winning bidder. You have read and agree to the Global Shipping Program terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.
By clicking Confirm, you commit to buy this item from the seller if you are the winning bidder.
By clicking Confirm, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Shipping Program terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.