Stackable 300W Grid Tie Photovoltaic System POWER INVERTER SOLAR PANEL 120V ACSee original listing |
||
|
Item condition:
New
|
||
|
Ended:
Aug 04, 2012
21:23:22 PDT
|
||
|
|
||
|
Shipping:
FREE
Expedited Shipping
|
See details
|
||
|
Item location:
United States
|
||
|
Seller:
|
||
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
... Read moreabout the condition
|
Mechanical Specifications:
Operation Procedures: 1, Connect the Solar Panel’s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 2, Put the AC output voltage switch on the inverter to the correct position (115V or 230V) according to your location home grid AC voltage. 3, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 4, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection”. Installation: The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Plug and play stack as many as you need. SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV to the grid, this will construct high-power grid-tie system Works great for solar panel 500 watts and under....if you need wind grid tie inverter starter kit, please search "wind grid tie inverter" at our store or contact us. Thanks |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cancel |