Details about RBC12 RBC26 RBC27 APC Replacement Battery Cartridge UPS 2-Year WarrantySee original listing
Aug 10, 2012
Houston, Texas, United States
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
RBC12 RBC26 RBC27
Brand New and Fresh RBC12, RBC26 or RBC27 Battery Replacement Cartridge - 12v / 7.2ah UPS Battery (Quantity 8)
- 12 Volt / 7.2AH Hour
- This kit comes with eight (8) 12 Volt / 7.2AH Batteries
- You must re-use jumper cable from your original RBC12, RBC26 or RBC27 cartridge
- Dimension: 151mm(L) x 65mm(W) x 96mm(H) x 101mm(TH) - 5.94"(L) x 2.56"(W) x 3.78"(H) x 4.02"(TH)
- Terminal Type : Faston-F2 (0.250"x0.032") Quick Disconnect Tabs
- 2 Year Replacement Warranty for Standby Application
- Compatible with many UPS (APC RBC12 or RBC26 or RBC27), scooters, electric bikes, etc. Please check your original battery's dimension to be sure.
This RBC12 / RBC26 / RBC27 kit works with the following APC UPS
Sealed Lead Acid Rechargeable Batteries
Our sealed lead acid batteries maintain the highest level
ISO 9001-2000 certification. UL and CE approval is also granted for our
high performance batteries. These rechargeable batteries feature a
leak-proof design that helps ensure operational safety, and a relief valve in
case of excessive gas pressure which doubles as a safety device in case of
excessive overcharge. To maintain its high quality, our batteries undergo
comprehensive rigorous testing at every manufacturing stage - capacity,
high-load, shelf-life, vibration, overcharge, relief, valve, and cycle life.
Scroll down to learn more about the benefits of our SLA Rechargeable batteries.
Ten Reasons to Choose Our Sealed Lead Acid Batteries
Sealed Maintenance Free
The valve regulated, spill-proof construction of our battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".
No special handling precautions or shipping containers—surface or air—are required due to the leak-proof construction.
The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost.
Long Service Life
Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200 and 1000 charge/discharge cycles depending on the average depth of discharge.
Batteries may be used in series and/or parallel to obtain choice of voltage and capacity. Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications. Over 50 models are available to choose from.
The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.
Our batteries use state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density provides superior power/volume and power/weight ratios.
High Discharge Rate
Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.
Long Shelf Life
A low self-discharge rate may allow storage of fully charged batteries for up to a year at room temperature before charging is required. Lower storage temperatures enhance shelf life characteristics even further.
Wide Operating Temperature Range
Our batteries may be discharged over a temperature range of -40 ºC to +60 ºC (-40 ºF to +140 ºF), and charged at temperatures ranging from -20 ºC to +50 ºC (4 ºF to +122 ºF).
Deep Discharge Recovery
Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability of recovering from excessively deep discharge.
Shipping and Handling:
Winning bidder pays shipping & handling Fee. If paying by PayPal, winning bidder will need to provide PayPal with a confirmed address. This shipping charges include the continental United States, Alaska, Hawaii and Puerto Rico. We will e-mail you the tracking number when your order ships. If you complete the transaction before 12:00pm CST, most order will ship out on the same business day, orders placed after 12:00pm CST will go out the next business day. Check, Cashier Check, or eCheck customer will have to wait till your payment clear our bank. Thank you!
Feedback is always appreciated! We leave feedback for eBay transactions as soon as the transaction is complete. We consider the transaction to be complete when we know that you have received your item and are happy with it. If you have any concern with your received item(s), please contact us via eBay's "Ask seller a question" link, we will answer your question promptly and we will do our best to resolve any issues.