R9 R11 TaylorMade Sleeve SENIOR FLEX 3 wood shaft USA Made SHAFT SETUP with tipSee original listing |
||
|
Item condition:
New
|
||
|
Ended:
Feb 28, 2013
07:08:04 PST
|
||
|
|
||
|
Shipping:
$9.80
Expedited Shipping
|
See details
|
||
|
Item location:
USA, United States
|
||
|
Seller:
|
||
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
... Read moreabout the condition
|
Brand: | TaylorMade |
| Dexterity: | Right-Handed | Model: | R11 or R9 + TP |
| Gender: | Men | Club Type: | Drivers |
| Flex: | Seniors | Shaft Material: | Graphite |
|
True Temper Rocket Senior Flex 3 Wood Shaft 61g Shaft with R9 Sleeve. Ready to install fast with your tool and hit in about a minute or less. Will fit the all the R11 and R9 3 Wood Heads TP or NON TP RARE SENIOR FLEX SETUP Ready to install in less than a minute with your tool / wrench. I have had so many seniors looking for a good R11 or R9 Shaft Setup. I finally got a setup that works great for those smooth senior swings. The feedback has been great... This is a Superlite SHAFT by True Temper. These were made in the USA. This is standard length will play 43 inches installed. It is also lighter than the stock shaft and will get the ball flight up higher for more carry. This is 100% Universal and will fit all R9 and R11 3 Wood Heads + no need to worry about TP or NON TP it fits them all.Shaft Details: True Temper Rocket Senior Flex Shaft Made in the USA This graphite shaft features an ultra lite design with a soft tip section promoting increased velocity at impact with a higher launch angle. The result is maximum distance with an incredibly soft feel. The moderate torque ratings and ultra lite weight make it an excellent choice for the serious senior seeking extra distance. The shaft has a 4.0 torque rating and a mid bend point. The weight is 61 grams.
This is for the shaft set up only... This includes the Taylor Made Sleeve, Shaft and a Pro Velvet Grip. Ready to install in less than a minute with your R9 tool. From the grip to the tip of the sleeve is close to 42.5 inches. Installed the club will be 43 inches. This setup has a authentic R9 TAYLOR MADE Sleeve. Aftermarket Sleeves are NOT machined properly and are NOT off center bored. The Real Taylor Made sleeves are bored off center and that is how you can rotate the shafts position and get the different loft, lie, open and closed Face angles. If you purchase any shaft sleeve setup make sure it is a Real Taylor Made Sleeve otherwise your shaft configuration Flight Control Will Not Work. This will also fit R9 and R11 Heads. Here is the conversion chart below:
|
| Cancel |