Please Read - Very Important!
Please see the "Compatibility" link at the top of the listing and the "Fitment & Product Info" section below for Vehicle Application Fitment Information.
Although we attempt to verify fitment information with the manufacturer,
it may not be available for all products or may be incomplete at the time of this listing.
Please be sure to view the "Notes" column in the Compatibility Section above and the full product description below for more fitment details if they are available prior to making your purchase.
If there are ANY questions or concerns at all about proper fitment,
please use the "Ask Seller a Question" link for fitment questions.
Please include your vehicle's year, make, model, engine size and drive train to ensure an accurate response.
|Fitment & Product Info
||Brand New In the Box |
Manufacturer Part #:
|Free Shipping to the 48 US States! |
(AK, HI, PR & INTL add. cost will apply)
Shipping Warehouse Location:
Fitment and Product Information
THIS PRODUCT FITS:
2006 HONDA ACCORD SEDAN 6 Cyl. with Automatic trans. except Hybrid
2005 HONDA ACCORD SEDAN 6 Cyl. with Automatic trans. except Hybrid
2004 HONDA ACCORD SEDAN 6 Cyl. with Automatic trans. except Hybrid
2003 HONDA ACCORD SEDAN 6 Cyl. with Automatic trans. except Hybrid
*Two(2) front rotors, Two(2) rear rotors, front brake pads and rear brake pads included
*Wear sensors included(where applicable)
*Components are engineered to work together for maximum performance
*One Click Brake Kit makes it easy
*Pre-matched and ready to install
*Easiest brake upgrade available
*3 year 36,000 mile limited warranty
About Power Stop
Power Stop Extreme Performance brake rotors and pads were first introduced in California in 1997. Over the years, Power Stop has earned a reputation for high quality by assuring tight tolerances and the best materials. Power Stop's mission is to provide the best solution for your vehicle's braking problem. Power Stop uses extensive testing to develop the best rotor and pad combination for your vehicle and driving style. Power Stop takes the guess work out of selecting the right pads and rotors.
Today, Power Stop is more committed to new product development and innovation than ever before. Their demanding criteria mandates high pad bite without high temperature fade or pedal pressure deterioration. Power Stop uses independent dynamometer testing to validate brake performance including pre-burnish (green) friction, high temperature brake fade, pedal pressure sensitivity, speed sensitivity and noise.
Each rotor is carefully analyzed for the best drill or slot pattern and modeled with CAD software. Power Stop drilled rotors are designed to maximize convection heat transfer and work in concert with our high mu (friction coefficient) brake pads. They use the finest castings and carefully countersink the holes to prevent stress risers. Power Stop stands behind their products with a unique 2 year warranty against rotor cracking. The best warranty in the business!
What is the best type of rotor or pad for my car?
Please contact customer service to assist you in the right selection 888 986 3373.
What is better, slotted or drilled rotors?
Power Stop makes both slotted and cross-drilled rotors but there are distinct advantages to drilled rotors which is why many OEM vehicles (Corvette, Porsche, Ferrari, etc.) come equipped with drilled rotors. Your stock brake rotors can exceed 1000 degrees F where many friction compounds start to break down. The high temperature can also lead to annoying brake pulsation and a shaking steering wheel. Drilled rotors are engineered to keep your brakes cool, so your brake pad has improved pad bite with reduced fade. Drilled rotors can operate up to 200 degrees cooler than slotted rotors to protect against rotor warping. While a slotted rotor does a good job of removing gas and dust generated by the friction pad, it does not cool your brakes. Improvement in brake output from drilled rotors is the subject of SAE paper 2006-01-0691 "The Effect of Rotor Cross Drilling on Brake Performance." In a nutshell, for street and highway driving, drilled rotors are typically preferred. For track, autocross, towing or other severe duty applications, slotted rotors are recommended.
What causes brake noise?
All rotating objects have vibration. This vibration can become amplified at specific natural harmonic frequencies. Have you ever noticed a little vibration in your car as you travel at a certain speed on the highway, and then it goes away as you go a little faster? The wheels were passing through one of these harmonics. Brake noise is caused by vibration primarily from the rotor, pad and caliper. The causes are complex and include things like the compressibility of the brake pad, the surface finish of the rotor, the stick-slip oscillation at certain temperatures, rotor dimensional run-out, rotor harmonic frequency and many other factors. Noise attenuation is a complex part of friction development. Power Stop Evolution and Posi-Mold pads feature dual active rubber coated constrained layer shims. The rubber is placed on both the pad side and caliper side of the shim. This helps reduce vibration that can be transmitted from the pad to the vehicle. Noise can be reduced by putting a silicon based material on the back of the plate where the caliper piston makes contact. It is also important to turn the rotor and make sure the rotor flange is parallel to the hub mounting surface. One sure fire way to make noise is when a pad overhangs the edge of the rotor or encroaches on the groove between the rotor hat and smooth flange surface. It is important that you check how the pad seats on the rotor when you change the brakes.
What causes rotor warping (a.k.a. pulsating brakes)?
The term warped rotors is commonly used to describe brake pulsation, but the rotor is not actually warping at high temperature so the term warped rotors is not accurate. The primary cause of brake pulsation is from uneven friction deposits on the rotor. As the brakes get hot, friction material from the pad is deposited as a very thin layer on the rotor. If you come to a hot stop and clamp your brakes down, the pad continues to deposit material on one spot. As you continue to use the brakes, this high spot on the rotor will get hotter than other parts of the rotor. When the temperature starts to exceed 1150 F, the crystal lattice structure of the iron can change into a very hard, brittle material called cementite. Your brakes can hit 1100 F or higher coming off a highway ramp with severe deceleration. Hard spots start to form, and it doesnt wear down like the rest of the rotor. The hot spot nodules will not dissipate heat as well as the neighboring material, so it gets hotter than the rest of the rotor and causes the spot to grow. The result is a permanent high spot that you feel as pulsating brakes. You can try to turn down the rotor, but chances are the nodule is bigger than the cut depth on the lathe. So it is just a matter of time before the pulsation will come back. However, you can prevent brake pulsation two ways: 1) use a high quality, properly drilled rotor to keep the temperature low, and 2) don't clamp down on your brakes after a hot stop!
What is the best way to improve brake performance?
In order of effectiveness: 1) Get really good tires that grip the road, 2) select the right brake pads with a high coefficient of friction, 3) use cross-drilled rotors to improve convection heat transfer.
How do I break in the pads?
IMPORTANT: BREAK IN NEW BRAKE PADS/ROTORS USING THE PAD BEDDING PROCEDURE AS FOLLOWS. PROPER PAD BEDDING CAN PREVENT ROTOR WARPING.
The break in procedure is critical to brake performance. The reason for a proper break in is to establish an even layer of friction material deposited on the rotors from the brake pads. It is very important that this initial layer of friction material is evenly distributed. Break in the pads as follows: 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. Then do 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, drive around for as long as possible without excessively heating the brakes and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage. It allows the heated resin in the brake pads to cool and cure. After the brakes have cooled to standard operating temperature, you may use the brakes normally.
I am installing Powerstop rotors, which direction should the drill pattern face for optimum performance?
Power Stop's drill pattern is optimized for maximum cooling, as well as maximum reliability. All of their rotors should be marked "L" (Left) or "R" (Right), with the left being the Driver's side and the right being the passenger side.
|Power Stop's Warranty Policy|
Power Stop rotors or pads purchased separately:
Power Stop LLC warrants to the purchaser of this product that it is free from defects in workmanship and materials at the time of purchase. The product when properly installed in the type of vehicle prescribed, and in which a defect in workmanship and material shall be found, will be exchanged free of charge, if returned to the seller who is authorized to give this warranty. Due to the extreme nature of applications that Power Stop rotors may encounter, we cannot extend the warranty beyond two weeks or 500 miles (the recommended break-in distance) from the time of installation. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, accident, or normal wear.
Power Stop rotors and pads purchased and installed together:
Power Stop warrants its products to be free from defects and poor workmanship including rotor cracking for a period of 2 YEARS OR 24,000 MILES from date of purchase by the original customer provided that the product has not been subject to abuse or misuse in its use or installation, or has been subject to modification or alteration and that the product has been installed in accordance with the vehicle manufacturer's instructions.
This warranty does not cover damage caused by negligence, lack of maintenance, accident, abnormal operations, track racing or improper installation or service. This warranty does not cover, and Power Stop LLC will not pay for or provide labor or materials that may be necessary to remove a product or install a replacement product. This warranty is limited to exchange of the product only when returned with the original purchase receipt. Power Stop makes nor implies any other warranty as to suitability for purpose other than that expressly warranted here and is not liable for any form of consequential damage losses or costs.
Any warranty claim accepted by Power Stop will be compensated by either a refund, or replacement of a product of equivalent value. This warranty applies to the original purchaser and is non-transferable. The freight cost is not included in warranty compensation. The consumer is responsible for any freight charges. Any and all warranty claims must be processed through Power Stop and require proof of purchase.
No person is authorized by Power Stop to modify or add to the foregoing warranty.
|US Domestic Shipping
Our shipping days end at 12PM Eastern Time. Your package can take 1-2 days before they ship out due to the volume of shipments we incur. In some cases, if you pay before 12PM Eastern time, we can ship same day. It all depends on where our products are when you place your order. We have warehouses all over the USA, so packages can ship from the West Coast, Midwest, or East Coast. If you are looking for more information on shipping time frames, please contact us!
Shipping costs in our eBay ads are shipping to the 48 states only. For shipping quotes to ALASKA, HAWAII, and outside the USA call us at 888-986-3373
Domestic Packages are shipped via UPS Ground. If you need faster service, please call us at 888-986-3373
wUnderCarParts wants every customer to be completely satisfied with their order. If you aren't, our generous return policy lets you shop with confidence.
For most items we carry, we offer a 60 day return period. If you aren't satisfied with your part, you can obtain an RA ("Return Authorization") number by calling 1-888-986-3373, Monday through Friday, from 8 a.m. to 5 p.m. Eastern Time. We want to know why you're returning the product, and if there's a mistake on our part, we'll do the necessary correction to guarantee your satisfaction. We'll cover return shipping costs by scheduling a time for your product to be picked up from your location and returned to us.
Items covered by this return policy should be in new condition and have all the original parts or accessories included when they are returned. Items that have been installed, but show defects in materials or workmanship, will be covered by the manufacturer's warranty. The information stated here is a guideline to our return policy. If you feel your situation may fall outside of these guidelines, or if you have questions, please feel free to call us directly at 888-986-3373 to speak with our friendly customer service agents. We're always willing to work with you to provide a fair and speedy resolution to any issue.
We always hope that you are satisfied with your purchase, but in the event that you need to return a product, we're here to help. Contact our friendly customer service people at 888-986-3373 to request a Return Authorization (RA) number. Any packages returned without prior authorization will be refused and sent back at the buyer's expense. As long as the item is in new, uninstalled condition and is not damaged or is missing parts, you will be refunded, less the original shipping costs, selling fees, and restocking fees that may apply.
If you are requesting an exchange or replacement of the product that is being returned, you will be charged for the exchange or replacement item, as applicable, and for any freight fees applicable at the time you make the request. Please contact us at 888-986-3373 for more information.
Toll Free: 888-986-3373
Normal Business Hours: 8am - 8pm Eastern Time Mon - Fri, Sometimes Saturdays
Note: If you are calling after business hours, please leave us a voice mail for we tend to come back into the office after hours and we can return your calls then.
Below is a list of warehouse locations where we source most of our products from. However, we do list in our ads which warehouses stock this product. However, if you are looking for other products, one of the warehouses below may have what you are looking for. Contact us directly so we list the item on eBay.
||Staten Island, NY
||Turtle Creek, PA|
|Oceanside , CA
||Kansas City, MO
|E. Hartford, CT
||St. Louis, MO
|Palm Beach, FL
|Mason City, IA
||East Rutherford, NJ
||El Paso, TX|
||Oklahoma City, OK
||Ft. Worth, TX|
||South Toms, NJ
||San Antonio, TX|
|Redford , MI
||King of Prussia, PA
|Bel Air, MD
||New Columbia, PA
wUnderCarParts LLC is one of the top emerging online retailers of automotive parts and accessories in our day. With over 10 years of experience in the automotive replacement and aftermarket parts industry, we strive to bring you the highest quality products from the most trusted brands, all at the lowest prices guaranteed. Whether you are a dealer, end-user, off-roader, racer, hauler, or daily driver, wUnderCarParts LLC has the parts you need at the prices you want.
We are a Detroit, Michigan based company, birthplace of quality American Auto. We have expanded our supply chain to over 50 warehouses across the country in an effort to provide extremely fast and accurate shipping on every order regardless of destination location. We also strongly strive to always pay for your UPS Ground shipping when we can. ;
Overall Mission Statement
Our mission is to have a company that provides the very best product in our industry and elevates the auto parts online purchasing experience in the eyes of the general public.
Mission to Our Visitors
Our mission is to bring you a well-written, interesting, accurate, and informative website that will tweak your auto parts interest, knowledge, and overall experience to make the decision process more enjoyable for you should you decide to buy.
Mission to Our Shoppers
Our mission is to offer you the lowest possible pricing on every product we endorse and to always attempt to deliver them to you free of charge and in a timely manner.
Mission to Our Staff
Our mission is to provide an environment in which you will grow, prosper, enjoy, and fulfill your potential in order to accomplish our missions to our shoppers and visitors.
Message from the Owner:
"My goal is to have wUnderCarParts.LLC be like your Mom and Pop stores of yester years where customer service was considered the most important aspect of the business."