an alcove or closet. Upflow/Horizontal units come ready
for upflow or horizontal application. The extended flush
100% fired and tested — All units and each
component are tested on the manufacturing line.
Best packaging in the
industry — Unique corner post design assures product will arrive to the
30 second blower delay at
start-up assures a warm duct temperature at furnace start-up. Adjustable blower
off settings (60, 90, 120 and 180 seconds).
30 second post purge increases life of heat exchanger.
Hot surface igniter —
Innovative application of an appliance type igniter with a 20 year history of
reliability. Utilizes proven Smartlite® technology.
Color coded wire harness
— designed to fit the components, all with quick-connect fittings for ease of service
Flexible category IV
venting system — May be vertically or horizontally vented using either a
one-pipe or two-pipe system for maximum flexibility in installation.
High Static Blowers — All
models equipped with high static blowers.
Low Boy Height — Easy to
apply in low ceiling applications, works well with taller high SEER coils, easier
to handle and install.
Tubular primary heat
exchanger — Heavy gauge aluminized steel
heat exchanger and stainless steel secondary heat exchanger assures a long
90 second fixed cooling
cycle blower-off delay (TDR) increases cooling performance when matched with a
High efficiency blower
kits maximize efficiencies. On select units, a SEER improvement of up to 1
point is realized.
Multi-speed direct drive blower — Designed to give a wide range
of cooling capacities. Switches on PCB,
provide ultra easy motor
LP convertible — Simple
burner orifice and regulator spring change for ease of convertibility.
Diagnostic lights for
easy troubleshooting without counting flashes — Dedicated light for flame
signal strength and 2 lights in combination to indicate all other fault codes
with easy to recognize states without counting flashes.
Incorporates integrated control
board with connections for electronic air cleaner and humidifier.
piece door design enhances furnace appearance and uses captured screws to
prevent losing door screws.
Seated vestibule reduces
burner and inducer sound levels.