NITE GUARD SOLAR PREDATOR PROTECTION, DEER REPELLENT

Mounting Instructions

The quantity of lights to use and their positioning is determined both by your area and the predator you want to deter. Below are guidelines to help you determine what will best suit your predator problem. The instructions do assume open, flat ground. If the area to be protected is located on a hill, adjust the height of the lights lower. If the area is located on lower ground, like a valley, adjust the height of the light to be higher. Also consider the surrounding area – if your area is flat and open then the lights will be able to be seen from a greater distance and can be placed further apart.

Positioning Your Nite Guard Solar

Predators are determined to get at your poultry, livestock or crops and will circle the entire area searching for a safe entry. They must see the flash to be repelled; therefore the correct positioning of the light is critical. You are the best judge of the final positioning of your lights because each area is different in terms of terrain, buildings, grass, brush, and trees. Mount the lights at eye level of the animal to be stopped and face it away from the area to be protected. One to four lights will be required depending upon your application. It is NOT motion activated but will flash automatically from dusk through dawn so night animals are stopped at long distances (500 yards or more) away. They do not come in to investigate but see the flash as a threat the instant they are aware of it. Protecting .