NEW! Great Planes Pro Building Board 16x48x3/4 GPMR6950 NIB

STOCK# - GPMR6950 New and unused. In the original manufacturer packaging.
Buy multiple items together with no additional shipping charge within the U.S.
when using ground service. Orders of $99.99 or more qualify for FREE shipping
within the U.S. using ground service.

International Buyers - Note: Import duties, taxes and charges are not 
included in the item price or shipping charges. These charges are the buyers
responsibility. Please check with your local customs office to determine what 
these additional costs will be prior to bidding/buying. These charges are 
normally collected by the delivering freight (shipping) company or when you 
pick the item up - do not confuse them for additional shipping charges. We do 
not mark merchandise values below value or mark items as gifts - US and 
International government regulations prohibit such behavior.                                                                                 

Please allow 2 to 4 weeks for international deliveries.
Not all international packages are shipped with tracking information.

    This is a Large size 16x48x3/4  Pro Building Board from Great Planes.
      It is a flat  solid surface to build model airplane sections upon.

FEATURES: Multiple-section  finger-jointed wood construction resists warping 
            so modelers can build with greater confidence.
          Fine wood grain surface and uniform density accepts T-pins easily.
            Parts are T-pinned in place over the plans on top of the board  so
            the airplane structure can be built and then glued once the parts
            are in position.
          This board is designed for large assembly projects.

INCLUDES: One Large size 16x48x3/4  Pro Building Board

REQUIRES: Nothing. It is sanded smooth and ready to use.

SPECS:    Length:     48  (1218mm)
          Width:      16  (406mm)
          Thickness: 3/4  (19mm)
COMMENTS: To prevent this board from warping  it must be allowed to stabilize
            in moisture content whenever it is moved to the hot outdoors from
            an air conditioned indoor area. This can be done be removing the
            packaging and standing the board on end for a day or two allowing
            air to contact both sides evenly. Warping can occur when placing
            one end against a workbench or face down on a table. The slight
            warping will go away in time as the entire board reaches the same
            moisture level. When one side has more moisture content it will be
            longer thus causing bowing usually in the cross grain direction.
            Once both sides reach the same moisture level  the board will again
            be flat.

          Use the Pin Driver T-Pin Tool (GPMR8050) to push-in or pull-out the
            T-pins easily.  This tool helps reduce finger fatigue that T-pins
            sometimes cause.
                                                                   JAL 11/15/00
                                                                          ir/jl

PAYMENTS: PAYPAL IS THE ONLY PAYMENT WE ACCEPT.
FEEDBACK: Please contact us first if you feel that you cannot give us
ratings of 5 in all categories. We make overall customer satisfaction
our #1 priority and would appreciate the opportunity to earn a 5 rating.