Details about Modern Style Kitchen Bathroom Vessel Glass Waterfall Tub Vanity Sink Faucet MG1Modern Style Kitchen Bathroom Vessel Glass Waterfall Tub Vanity Sink Faucet MG1 See original listing
Nov 10, 2013 19:02:41 PST
Monterey Park, California, United States
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
|Number of Handles:||
Standard US 3/8"
Step 1: Position the Faucet
A: Begin installing your faucet by placing the gasket and faucet in position on the sink.
B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.
C: From the top of the sink, check the faucet and gasket positions.
D: From under the sink, tighten the mounting nuts, making certain not to over-tighten. Over-tightening could damage the nuts and make them difficult to remove in the future.
Step 2: Attach the Water Supply Tubes
A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.
B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.
C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.
D: Tighten the nut with a wrench.
Step 3: Connect the Faucet Lift Rod
A-1: From the top of the sink, insert the lift-rod into the faucet.
A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.
B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.
B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.
B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.
B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.
C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.
Step 4: Flush the Faucet
A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.
A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.
A-3: Remove aerator and black sealing gasket above it.
A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.
B: Open both water supply valves under the sink.
C-1: Allow the water to run for 15 seconds.
C-2: Close the faucet handles (turn off).
D: Make sure any debris is cleaned from the aerator screen.
E: Replace the aerator.
How to Install a Tub & Shower Faucet
While there are some elements that will require the aid of a professional plumber, learning how to install a new tub and shower faucet is a relatively simple task. Things you need:
1. Mark the new tub location. Use a tape measure and a pencil to mark the location for the new tub.
2. Cut wood framing for the tub drain. Use the circular saw to cut the framing of the bathroom floor below the drain position to allow room for the tub's drain pipe.
3. Reinforce the floor framing. Measure distance between floor joists. Measure and cut wood to length. Use nails and a hammer to put in reinforcing blocking near tub drain.
4. Open wall. Use your hammer to remove the existing wall board behind the shower faucet location.
5. Attach the shower faucet to wall studs (follow manufacturer's instructions). You may have to measure and cut wood blocking to support the shower faucet. Cut wood with the circular saw. Use nails and hammer to fasten wood block between the studs per manufacturer's instructions.
6. Put the tub in place. With the help of others, position the tub.
7. Attach the drain control mechanism. A shower faucet and its drain control mechanism are frequently in a single unit. Attach the drain to the tub. Attach the drain control mechanism near the shower faucet per manufacturer's instructions.
8. Let a professional finish it off. Call a local licensed plumber to make final drain and water supply connections as well as the final adjustments to the shower faucet.
As it is international shipping service, delivery time and postage vary from different region. If there is any question, please feel free to contact us.
Please arrange payment within 8 days after end of auction, otherwise an unpaid case will be filed automatically by Ebay. Please don't buy an item if you can't/won't pay for it. We prefer payment via PayPal since it is fast and reliable. Bank transfer, West Union and Cheque are also accepted, but need several days to be cleared. The buyer must include the following info in PayPal's "Note To Seller" section or send us an Email or Ebay Message: Your Telephone Number.
Return and Exchange Return & Exchange Policy
14 Day | No Risk | 100% Satisfaction Guarantee
we are American seller. Our Manufacturing Factory is in China. We also have warehouse in LA, America. We have an easy return/exchange process! If you are not totally satisfied with the item ( including dislike). You may return this item for a full refund. Please contact our customer service to get the address. For US Buyers, please send the package to our LA warehouse.
We'll send a RMA code to your PayPal email as soon as we accept the return. Please print your RMA code on the outside of the returned package so that we can process your return quickly and accurately.
Item must be returned (means applied and started to return) within 14 days of accepting the delivery.We are responsible for any quality problem caused by the faucet itself, for up to 3 years from the day you receive the faucet.
Notice Concerning Refunds
Once your return has been received, we will expeditiously send a refund request to your PayPal account and you will receive the refund within 2-3 business days.
Notice Concerning Exchanges
our customer service will contact you upon receipt of your return within 24 hours. Please be responsible for the Return Shipping Rate of your item(s). If you would like to exchange for an entirely different style of item, the best way to do is to return your original item and purchase the new one.
Welcome to email us, and our staff will give you a satisfactory answer. Satisfied, please do leave us a positive feedback and 5-star DSR. If you are not satisfied with item or service in any circumstances, please do CONTACT US before leaving any feedbacks and low DSR scores or taking any actions and give us a chance to solve the problems for you.