Kolossus 4 Gauge 4 Channel Amp Install Kit
KnuKonceptz Kolossus amp installation kit's feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK4 amp kit provides 18 feet of blue power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 120A fuse is provided within the KOL-AK4 amp install kit, but can be upgraded to a maximum of 150A fuse (sold separately). The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 18' as one unit and using the FH-44 to "splice" a few feet of wire)
Signal for your 4 channel amplifier installation kit is carried by TWO Klarity Kable 5 Meter (16.25') RCA Cable. The Klarity RCA Cable is a copper braid shielded coaxial RCA that uses a molded metal RCA terminal with strain relief for a durable, low loss connection to your head unit and amplifier. A remote turn on lead is built into the Klarity RCA Cable making for less cables to run during the installation of your amp kit. This wire is connected to your radio's power antenna lead or amp turn on lead (refer to your head unit's manual) Your amplifier's output is sent through KnuKonceptz Klear 12 gauge speaker wire, 20 feet of 12 gauge clear blue speaker wire is included with the kit.
The KOL-AK4-4 includes 20' of speaker wire. Depending on what 4 speakers you are connecting, additional speaker wire may be required.
KnuKonceptz Kolossus 4 Gauge Complete Amp Installation Kit includes:
-18 Feet 4 Gauge Ultra Flex Blue Tinned Oxygen Free Copper Power Wire
-3 Feet 4 Gauge Ultra Flex Black Tinned Oxygen Free Copper Ground Wire
-One inline fuse holder with 120A Mini ANL Fuse
-TWO 17 Foot OFC Blue eKo RCA Cable with Built in Turn On lead
-20 Feet BLUE Klear Kable OFC 12 Gauge Speaker Wire
-2 Gold Plated 4 Gauge Ring Terminals, 2 Gold Plated 4 Gauge Spade Terminals
-Wire ties and Loom
Kolossus Kable 4 Gauge Spec:
-Kolossus Kable Power / Ground Wire consists of 2058 Strands of 36 gauge tinned Oxygen Free Copper, making it the LARGEST 4 gauge cable on the market!
-Maximum load @ 20 feet - 150A
-Outer diameter - 11mm, Conductor diameter ~8mm
How many watts can this amp kit handle?
At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (three 30A fuses = 90A total draw) If this number is under 120A, this kit will fit your application. If over 120A, a larger 150A fuse can be used. Systems over 150A, a larger gauge wire would be required.
What is the small 18 gauge wire built into the RCA cable for?
This is the remote turn on lead for your amplifier. One end is connected to either the power antenna lead or Amp turn-on lead of your headunit's wiring harness. While the other end connects to the amplifier's turn-on connector (REM)
Can I alter this kit in any way before purchasing?
Our amp kits are made in large batches to reduce cost, which is passed onto you. We can not alter them in any way. Should you need to make alterations, you would have to purchase the items individually from our shopping cart.
I received my amp installation kit, but the Mini-ANL fuse is not in the FH-44 inline fuse holder?
The Mini-ANL fuse is located in the parts bag along with the ring terminals and snap bushings. It is not installed so that the installer can complete the install and add the fuse after all connections are made.