eBay
  • Daily Deals
  • Sell
  • Customer Support

This listing has ended.

 
Ships to:
Worldwide See exclusions
Delivery:
 
Ships to:
Worldwide See exclusions

Details about  KONICA MINOLTA LS-110 LUMINANCE METER EXCELLENT +++

KONICA MINOLTA LS-110 LUMINANCE METER EXCELLENT +++ See original listing
KONICA-MINOLTA-LS-110-LUMINANCE-METER-EXCELLENT
Item Sold
Item condition:
Used
Ended:
Jun 14, 2011 13:44:37 PDT
Price:
US $2,650.00
Best offer accepted  
This item was listed in the fixed price format with a Best Offer option. The seller accepted a Best Offer price.
Shipping:
FREE Expedited Shipping | See details
Item location:
Miami Beach, Florida, United States

Description

eBay item number:
150608404853
Seller assumes all responsibility for this listing.
Last updated on  May 25, 2011 21:16:17 PDT  View all revisions

Item specifics

Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
 

KONICA-MINOLTA

LUMINANCE METER LS-110 EXCELLENT+++ CONDITION


 IN EXCELLENT ++CONDITION!!  INCLUDED IS THE LS-110 METER, LONG EYE RELIEF EYEPIECE;110 CLOSE UP LENS; STRAP, FITTED CARRYING CASE
THIS METER HAS OLD CALIBRATION CERTIFICATE INCLUDED MAY BE NECESSARY TO BE RECALIBRATED PRIOR TO USE.
INCLUDED IS A COPY OF THE MINOLTA INSTRUCTION MANUAL
THE MINOLTA LS-110 LUMINANCE METER WITH THESE ACCESSORIES IS OVER $3,700
PLEASE EMAIL ANY AND ALL QUESTIONS
THANK YOU

FROM THE KONICA-MINOLTA WEBSITE:

Luminance Meter LS-110

A lightweight, compact, highly-portable luminance meter for measurements of a wide range of luminance conditions.

Introduction

Hand-held and light-weight precision Luminance Meter

High precision Luminance-Meter with small angle

The spot luminance meters LS-100 and LS-110, categorized in the upper range of the DIN quality class B, are among the best hand meters on the market. The SLR (single lens reflex) optical system allows precise targeting and ensures that the viewfinder shows the exact area to be measured, even at very short distances. This makes even precise focussing very easy. In addition to the measurement field and the measurement environment, the viewfinder also shows the measured luminance value. The pistol grip makes handling of the unit very secure. We have given special attention to minimize flare and to give precise V(λ) correlation (CIE relative photopic luminosity curve). With the help of a close-up lens, areas as small as 0.4mm diameter can be measured.

Areas of application

Light sources of all types can be measured with the LS, for example signal, traffic lights, airport lighting, lamps, LED's, picture tubes, etc., just about anything that emits light. Now you can, for example, guarantee minimum brightness, exchange lamps that are too dark early enough, build quality assurance into the production of lamps, or check indirectly illuminated objects like movie screens.

Background knowledge (LS-100)

The unit of illumination L equals candelas per square metre (cd/m2), and within this is also the source of this measurement, namely the light strength I emitted per surface area unit A in the angle ε :

L= I/(A cos(ε))

Basically, luminance specifies the brightness of a luminous surface and/or a light source. The sun has an luminance of about 1 billion cd/m2, fluorescent lamps about 10,000 cd/m2. In some countries the unit foot lambert (ftl) is also used to express illuminance, which the LS can display if required. 1 ftl = (1/π cd/ft2 = 3,426 cd/m2
With its 1° angle of measurement, the LS-100 represents the standard spot luminance meter. Its measurement range starts at 0.001 cd/m2 and is therefore able to meter extremely dark surfaces. With the large 9° field of view and the measured value displayed on an LCD in the viewfinder, the object of measurement can be controlled at all times without taking the LS-100 from your eye. A second LCD display on the exterior of the meter, plus a tripod screw port, allows the user to take measurements without looking through the viewfinder. A neutral density eyepiece filter is included to allow the user to measure strong light sources using the viewfinder.

Besides the measurement of absolute luminance, the LS can also display relative luminance as a percentage of a defined standard (target). With this function, the brightness distribution on large surfaces such as monitors can be rapidly ascertained. The peak luminance value can also be displayed on command, useful when measuring flickering light sources such as fluorescents.

In order to further improve the already negligible deviation from the targets of the CIE relative photopic luminosity curve for certain light sources, the LS-110 offers the option of user-calibration.


Features

LS-110

Product Overview

  • Relative spectral response
    For the measurement of luminance, ideally the relative spectral response of the meter should perfectly match the sensitivity of the human eye for photopic vision, as represented by the CIE spectral luminous efficiency V(λ).

Principal Applications

  • Measurement of the luminance of CRTs, LED, and ELs.
  • Measurement of road and tunnel brightness
  • Measurement of rail-system signals
  • Measurement of road and airport signals
  • Measurement of illumination and outdoor signs
  • Measurement of illumination equipment and devices
  • Research and measurement testing
  • Measurement of device brightness

Main Features

  • SLR (single-lens-reflex) optical system
    The LS-100's single-lens-reflex design ensures that there will be no deviation between the actual measurement area and the area indicated in the viewfinder. Eliminating the effect of illumination outside the measurement range, this flareless optical system ensures accurate measurement of only the target area.
  • Spot measurement for small target areas
    With acceptance angles of 1° and 1/3° respectively, the LS-100 and LS-110 are ideal for measuring the luminance of small specimens. Furthermore, a close-up lens (sold separately) can be used to achieve a 1.3-mm measurement diameter for the LS-100 and a 0.4-mm measurement diameter for the LS-110.
  • User calibration and color-correction functions for wide ranging support
    With a user calibration function allowing recalibration to any standard luminance that you select and a color-correction input function for correction of indication differences for specific light sources, multiple luminance meters can be used without error for extremely detailed luminance control.
  • Luminance ratio and peak value measurement
    Based on the particular application, measurement values can be set to instantaneous luminance, peak luminance, and luminance ratio.
  • Two-way RS-232C communication
    Featuring an RS-232C interface as standard, this luminance meter can connect with a PC to send measurement data and receive control signals.
  • Lightweight, compact, and powered by a single 9V battery
    (Power can also be supplied by the DP-10 Data Printer.)

Specifications

Principal Specifications

Model  


Luminance Meter LS-100


Luminance Meter LS-110
Type SLR spot luminance meter for measuring light-source and surface brightness
Acceptance angle 1/3°
Optical system 85mm f/2.8 lens; SLR viewing system; flare factor less than 1.5%
Angle of view
Focusing distance 1014mm (40 in.) to infinity
Minimum measuring area Φ14.4mm Φ4.8mm
Receptor Silicon photocell
Relative Spectral Response* Within 8% (f1´) of the CIE spectral luminous efficiency V (λ)
Response time FAST: Sampling time: 0.1s, time to display: 0.8 to 1.0s; SLOW: Sampling time: 0.4s, time to display: 1.4 to 1.6s
Luminance units cd/m2 or fL (switchable)
Measuring range FAST: 0.001 to 299,900cd/m2 (0.001 to 87,530fL)
SLOW: 0.001 to 49,990cd/m2 (0.001 to 14,590fL)
FAST: 0.01 to 999,900cd/m2 (0.01 to 291,800fL)
SLOW: 0.01 to 499,900cd/m2 (0.01 to 145,900fL)
Accuracy 0.001 to 0.999cd/m2 (or fL): ±2% ±2 digits of displayed value
1.000cd/m2 (or fL) or greater: ±2% ±1 digit of displayed value
0.01 to 9.99cd/m2 (or fL): ±2% ±2 digits of displayed value
10.00cd/m2 (or fL) or greater: ±2% ±1 digit of displayed value
(Illuminant A measured at ambient temperature of 20 to 30°C/68 to 86°F)
Repeatability 0.001 to 0.999cd/m2 (or fL): ±0.2% ±2 digits of displayed value
1.000cd/m2 (or fL) or greater: ±0.2% ±1 digit of displayed value
0.01 to 9.99cd/m2 (or fL): ±0.2% ±2 digits of displayed value
10.00cd/m2 (or fL) or greater: ±0.2% ±1 digit of displayed value
(Measurement subject: Illuminant A)
Temperature/humidity drift Within ±3% ±1 digit (of value displayed at 20°C/68°F) within operatingtemperature /humidity range
Calibration mode Minolta standard/user-selected standard (switchable)
Color correction factor Set by numerical input; range: 0.001 to 9.999
Reference luminance 1; set by measurement or numerical input
Measurement modes Luminance; luminance ratio; peak luminance or luminance ratio
Display External: 4-digit LCD with additional indications
Viewfinder: 4-digit LCD with LED backlight
Data communication RS-232C; baud rate: 4800bps
External control Measurement process can be started by external device connected to data output terminal
Power source One 9V battery; power can also be supplied by optional Data Printer DP-10
Power consumption While measuring button is pressed and viewfinder display is lit: 16mA average
While power is on and viewfinder display is not lit: 6mA average
Operating temperature/humidity range 0 to 40°C, relative humidity 85% or less (at 35°C) with no condensation
Storage temperature /humidity range -20 to 55°C, relative humidity 85% or less (at 35°C) with no condensation
Dimensions 79×208×150mm (3-1/8×8-3/16×5-7/8 in.)
Weight 850g (30 oz.) without battery
Standard accessories Lens cap; Eyepiece cap; ND eyepiece filter; 9V battery; Case
 

Questions and answers about this item

No questions or answers have been posted about this item.




00000

Place bid

Time left:
Current bid:
(Approximately ##1##)
Shipping:
Import charges:
Your max bid:
Your max bid:
By clicking Confirm bid, you commit to buy this item from the seller if you are the winning bidder.
By clicking Confirm bid, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Shipping Program terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.
Cancel
Loading...
Resume bidding, if the page does not update immediately.
Place bid
Review and confirm your bid
Bid confirmation
d
h
m
s
day
hour
hours
FREE shipping
See item description
(Approximately ##1##)
(Enter ##1## or more)
(Enter more than ##1##)
Your max bid:
Increase max bid
Place bid
Confirm bid
Increase max bid
Cancel
Change bid
Close
, you've been outbid. Don't let it get away - bid again!
, you're the highest bidder on this item. Hope you win it!
, you're the first bidder. Hope you win!
, you're currently the high bidder, but you're close to getting outbid.
, this auction is almost over and you're currently the high bidder.
, you're the high bidder, but the reserve price hasn't been met.
Please enter your bid again.
Please enter a valid number as the bid price.
Enter an amount that is equal or greater than the minimum bid required. This can be found under the bid entry box.
Maximum bids can't be lowered once they're submitted.
This seller requires the buyer to have a PayPal account to purchase this item. Get a PayPal account here .
Your bid is greater than or equal to the Buy It Now price. We recommend you purchase this item via Buy It Now. If you still wish to bid, you may do so below.
Time left:
Current bid:
(approximately ##1##)
Your maximum bid:
(approximately ##1##)
Increase your maximum bid:
By clicking 1 Click Bid, you commit to buy this item from the seller if you're the winning bidder. Learn moreabout 1-click bid - opens in a new window or tab
day
hour
min
sec
days
hours
mins
secs
(approximately ##1##)
Winning bid:
Starting bid:
Close
Congrats! The auction has ended and you're the winner.
The auction has ended, but the reserve price was not met.
Sorry, the auction has ended and you were outbid.
Good news, you're the high bidder.
Sorry, you've been outbid.
You're the high bidder, but the reserve price is not met.
Please enter a higher amount than the current bid.
Maximum bids cannot be lowered once submitted.
Please enter a valid number.