|Feather boards are a great tool for holding your stock & preventing kickback, but they do have limitations. Now there is an option with no limitations. Introducing JessEm CLEAR-CUT Stock Guides.|
The unique guide rollers on the stock guides are mounted on a 5 degree angle effectively steering stock toward the fence. The stock is pulled tightly to the fence & the grip force of the urethane rollers holds it securely in position.
CLEAR-CUT Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. With the stock being guided at a slight angle toward the fence it is critical they not rotate in the outfeed direction, especially if you are cutting a dado or other machining with the board. This would feed the stock incorrectly into the cutter. To prevent this & any kick back, each roller is fitted with a one way needle roller bearing. This ensures each roller spins in the direction of feed...only.
With JessEm Clear-Cut Stock Guides, set up is fast and easy. They are locked in their position along the fence with a single twist of the pivot knob & the height setting is controlled with the tightening of the clamping knob. For long term routing JessEm has broached the clamping knobs to accept a 14" hex key so you can tighten them even more for added security that they won't lose their setting. When not in use they just pivot out of the way.
With CLEAR-CUT STOCK GUIDES there is no need to struggle holding long boards tight to your fence. The guides pull your stock securely into position & there is no need for a second set of feather boards. Just feed your work into the stock guides and they pull your stock into the fence while you hold onto the other end.
You can have complete control of your stock even when routing wide boards or large panels, the dual action of the guides will pull your work tight to the fence. You will achieve faster, safer precise cuts as your work is held in position.
CLEAR-CUT Stock Guides mount to standard 1/4" T-Slot found on most commercially available router table fences. An accessory mounting plate is available for shop made router table fences. The guides have 2 3/4" of total adjustment and maximum stock thickness is from the surface of your table to 9/16" below the center of the mounting T-Slot.
CLEAR-CUT Stock Guides are CNC machined from solid aluminum and anodized for appearance & durability. The adjustment knobs are machined from stainless steel for longevity, the rollers are CNC machined from wear resistant acetol resin which also has a low co-efficient of friction and the traction tires are moulded out of urethane for long life and superior grip of your stock.
Clear plastic guard not included.
Buy w/ confidence. We are Trusted Sellers with a reputation for fast, dependable delivery. All merchandise we sll is guaranteed to be authentic, new & unused. We do not sell refurbished, repaired, returned or previously owned merchandise!
Pay by Paypal or Propay credit. Or call our toll free line 888-566-7879 & pay by phone.
Thank you for your interest in this listing.
|Shipping within the Continental US for the first item is: $0.00: and $0.00: for each added item.|
Shipping to AK, PR & HI is: $29.95: and $19.00: for each added item.
Shipping to the UK & Canada is $79.00: and $69.00: for each added item.
IMPORTANT: Discounted shipping rates are applicable for identical items only.
WE OFFER SECURE SSL ENCRYPTED CHECK OUT.
We accept VISA & MC credit card payments.
Follow the simple check-out procedure once you purchase the item. Click on the button titled "CHECK OUT" at the bottom of the listing. If you elect not to use the checkout cart you will receive an "eBay End of Auction" email. Click on the secure payment link and follow instructions, or call in your payment toll free 888-566-7879 10:30am-5:30PM EST M-S. PLEASE NO DROP SHIPMENTS. ITEM PURCHASED MUST BE SHIPPED TO ADDRESS FILED w/EBAY
We make every effort to present information that is accurate. However, it is based on data provided by the manufacturer and/or other sources and therefore exact configuration, specifications & accessories should be used as a guide only and are not guaranteed. We are not liable for any inaccuracies, claims or losses of any nature. Inventory is subject to prior sale and prices are subject to change without notice and cannot be combined with any other offer(s). The price for listed merchandise does not include other charges such as: duty & associated brokerage fees, State or Local Taxes.
Once payment is received, we will normally ship your purchase within one business days.
You must be certain you want/can pay for the item before you commit to buy. As soon as you commit to buy then ebay charges the seller a commission and the item is taken 'off sale,' preventing anyone else from buying it . If you then fail to pay then this means you have prevented someone who was prepared to pay from buying the item; the seller has to pay ebay the commission and the seller then has to pay to relist the item. If a buyer fails to pay they will receive a 'payment reminder' sent via ebay and if there is still no response a 'non paying bidder alert' will be filed with ebay and a 'strike' will be set against the buyers account. Three strikes and ebay will suspend the buyer indefinitely.
Please only click on 'buy now' once. You will then receive an email within an hour (usually within seconds) with payment instructions. If you do not receive the email immediately please do not click on 'buy now' again as this will order another item.
We reserve the right to refuse credit card payments from Ebayer's considered an unacceptable risk i.e. new members, dormant accounts, feedback ratings <99%, etc.
You will never have to worry about the authenticity of products we sell. We only offer items we are authorized to sell. All items are new and unused. We do not sell refurbished items. Be assured that all of the photos you're looking are representative of what you will receive, not a replica or copy. In most cases, the photos used in our listings have been supplied by the manufacturer and are representative of what you will receive. In the case of wood products i.e. humidors, briar pipes, cutters, etc., we cannot guarantee you will receive the same grain pattern, as each item is considered unique.
1. All items may be returned within fourteen (14) days of receipt. A twenty five (25) percent return fee applies. Buyer is also responsible for all listing fees.
2. Returns will be refused if the item has been used, worn, or altered from its original condition in any way.
Items must be returned with all original paperwork and boxes.
|WARRANTY - If the item you purchased stops working after seven (7) days of receipt, please contact the MANUFACTURER and request a WARRANTY CLAIM. |
| Estimated Delivery Leadtimes|
|Upon receipt of payment, Orders are normally shipped within seven business days. Unanticipated shortages may delay delivery up to two weeks.|
Per the Post Master General "butane lighters may not be sent to APO & FPO addresse uss, even if they are empty"
NORMAL TRANSIT TIMES (NOT guaranteed by USPS):
*** USPS Priority Mail: approx 3 to 4 business days
*** USPS First Class Mail: approx 3-7 business days
*** USPS Parcel Post/Flat Rate (ground):
Eastern Time Zone: approx 3 to 7 business days
Central Time Zone: approx 5-9 business days
Mountain Time Zone: approx 7-11 business days
Pacific Zone & TX: approx 8-12 business days
*** USPS Parcel Post/Flat Rate (sea) to HI, AK, PR, VI, GU: approx. 4 to 8 weeks
*** USPS Express Mail (Canada): approx 4 to 9 business days
Note: these are typical transit times. Some recipients may experience faster or slower delivery times. Shipments are made on weekdays only. There are no shipments on weekends or public holidays.
Packages with Delivery Confirmation: please use the USPS tracking site whenever possible. The USPS tracking site will only give date of shipper's notification of shipment and delivery info. Enroute tracking info is normally not available during package transit and may or may not be available after delivery.
****Int'L Customers Please note: WE CANNOT PROVIDE INSURANCE FOR LOST or DAMAGED SHIPMENTS BEYOND THE UNITED STATES BORDER.
WE ARE THE GOOD GUYS..we believe in the Golden Rule, family, the flag and fair prices. ***REMEMBER*** the most important thing when purchasing on the internet...***BUY THE SELLER FIRST*** then the item. Your complete satisfaction is my guarantee! Just check my feedback. If not happy for any reason, just return the item to me unused within fourteen days after receipt for a refund, less shipping and our 25% return fee. Check out our "ABOUT ME" page, you will realize that you are dealing with someone who is a responsible retailer who has been inbusiness for more than fifteen years.
Should you have a question please feel free to contact us via email or if you prefer personal assistance, contact us by phone (toll free) 888-566-7879 10:30AM - 5:30PM EST M-Sat
Buy with confidence. We are a real store and have been in business for 15 years. We are trusted sellers with a reputation for friendly customer service. Your satisfaction is guaranteed.
| BUY IT NOW! SECURE SSL CHECKOUT|