100% Brand New and High Quality
1.Introduction of HUD
1.1. HUD is short for “Head Up Display”, which means the display that you can see when you look up or look ahead. When the vehicle is running at high speed, especially at night, the driver may look down at the meters, which may cause accident because there is no time for driver to take effective measures if emergency occurs. To avoid such case, some luxury cars are equipped with HUD, which can display the relevant information on the front windshield at driver’s eye level height. Its display position is adjustable and brightness can be automatically adjusted based on the ambient brightness as well, due to which the driver needn't to look down at the instrument board and the visual time of seeing blind spot is shortened. It is of great value to reduce traffic accidents caused by looking down at the instrument board.
1.2. This is a low-priced and multifunctional product, developed based on the OBD II interface, with the features of stable performance, exquisite appearance, safe application, and convenient installation, which can achieve installation, adjustment, and test within 3 minutes. In order to give full play to its all functions, please read the instruction carefully before using the product. In this case, you can enjoy the speed as well as improve the driving pleasure and safety.
2. HUD interface and function instruction
2.1. This product is HUD with OBD II interface, with features of simple installation, "plug and play", and no damage to original circuit.
2.2. Suitable for vehicles of any model with metric and British units switched freely.
2.3. The vehicle speed and rotate speed can be displayed in one screen with convenience and direct viewing features
2.4. All-digital display, with convenience and direct viewing features.
2.5. Polarizer design to reduce interference of driver's sightline (optional)
2.6. Scroll button contributes to easy operation for users (one finger can complete all settings)
2.7. Intelligent warning: sound warning and lighting warning are for user's free choice
2.8. Alert function of changing gear: appropriate for new drivers (Suitable for vehicle models of manual transmission as well as Automated Mechanical Transmission)
2.9. Displaying brightness can be adjusted automatically according to ambient brightness
2.10. The opening angle of throttle can be seen at any time with throttle angle displayed
2.11. The battery voltage will be automatically displayed after the start of vehicle.
2.12. Auto power on & off function: the master module of HUD will start to run automatically when starting engine, and as the vehicle shut down, it will shut off automatically.
2.13 Flexible flat Cable(Cab6.0) adopted makes wiring more beautiful.
3.Product dimension and Electrical code
Working voltage: OBDⅡ 12V
Maximum working current: 140MA
Working current: 60MA
Working temperature: -20℃）-（85℃）
Standby working current: ﹤3MA
4.We support as below agreement
1.ISO 9141-2(5 baud init,10.4Kbaud)
2.ISO 14230-4 KWP(5 baud init,10.4Kbaud)
3.ISO 14230-4 KWP(fast init,10.4Kbaud)
4.ISO 15765-4 CAN(11bit ID,500Kbaud)
5.ISO 15765-4 CAN(29bit ID,500Kbaud)
6.ISO 15765-4 CAN(11bit ID,250Kbaud)
7.ISO 15765-4 CAN(11bit ID,250Kbaud)
5.KM and MILE:
Connects via OBD Plug and Play For any 2005 and up Vehicles. Or your car have OBDII and follow OBDII after 2011 public stardand.
we can't fit all the models in the compatibility list. However
Plug and Play For most up 2005 Vehicles.
General OBDII system from 1996,almost most of cars need have it. You can check your original car user manual and comfirm it(OBDII) or not?
Or you can ask your familiar depot or specialized person .
No Professional Installation Required HUD System
Rpm warning function which can be set up by user (shift light)
Driver can now see speed directly on the windshields, allows a driver to keep their head up (observing the road) and still see important vehicle information such as the car's Speed (km), Rpm, Water temp, Battery Volt on to your windshields
Water temp , volt warning function which can be set up by user ( water temp gauge & volt gauge)
Head Light switch on warning function ( when dark)
Project Speed (km), Rpm, Water temp, Battery Volt on to your windshields
Speed warning function which can be set up by user
Speed Range 0 - 255 km
Rpm Range 800~ 5000
Water Temp warning:more than 110 Celsius
Volt range warning:less than 11 V
Rpm warning function which can be set up by user (shift light)
| || || || |
6.Test procedure of S-200 :S.O.P:Turn off HUD power and switch to (off).
1. Do cars be applicable to the detection of S-200:
1.1.First turn off the car power→plug OBD2 →Connect the cable to the S-200 host →switch to (ON)→turn on the car power.
1.2.Not bright→It can’t be installed on your car.(Refer as below other infromations)
1.3.Bright→and have power→but no gate like to display the RPM →it can’t be installed on your car.
1.4.Bright→and have power→show gate and like display to launch the RPM→show voltage →normal and ok for your car.
2.Check that an automatic shutdown?
(Automatic power-off, automatic activation of HUD main upon ignition; and automatic power-off of HUD main upon shut-down of the vehicle)
2.1.Cut off car power→automatic power-off of HUD→normal
2.2.Cut off car power→no automatic power-off of HUD→go into Parameter 1→and adjust 1 to 2→automatic power-off of HUD→normal and ok
(90% cars can be match with this item if setting 1 can’t be power-off automatically)
2.3.Above steps still can’t shut down, please contact us.
3.ther Problems and issues on the S-200:
●Because some top cars (BMW or Lexus…)have electronic equipments such as keyless which likely to interfere with the S-300 and you maybe encounter situations such as :
→Keyless device may cause the machine not to respond, and it maybe have opportunities for bright but turn off the machine and it still will be bright →(M3 car type)→returning policy.●
●TDCI diesel cars: The voltage value will bounce , some cars can’t be match with our OBD HUD. [Because diesel output agreement is different from OBD II public agreement]
●Currently testing cars - the majority have their own external function devices such as touch the door or others or keyless, there will be conflict with our OBD II HUD.
●The HUD is kept standby when the engine is turned off, and there is still a little bit consumption of current (the common character of all OBD products); turn off the HUD main if your car is not to be used for a longer period (e.g. a week or longer).
7.Compatibility,We test it in Hong Kong:
Mazada : all type (Up 2002 and 2002)
FORD : all type (Up 2002 and 2002)
HONDA : all type (Up 2002 and 2002)
Mitsubishi: all type (Up 2002 and 2002)
Volks Wagen: all type (Up 2002 and 2002)
BMW BENZ PEUGEOT :all type (Up 2002 and 2002)
VOLVO OPEL Audi: all type (Up 2004 and 2002)
NISSAN all type: (Up 2006 and 2006)
HYUNDAI KIA all type :(Up 2006 and 2006)
TOYOTA all type: (Up 2008 and 2008),but you can still test it or your car is follow America system
SAAB all type :(Up 2002 )
Renault all type: (Up 2002 )
Skoda :( Up 2006)
Proton Lotus(SAVVY):( up 2005 )
￭ If your car is 【Made In JAPAN or follow Japan system】, some “down 2008 “type which not follow OBD II public agreement, and they follow J-OBD II by themselves.
￭ Most of up 1997 and 1997 cars are 【Made In America or follow America system】which almost follow OBD II agreement and be applicable to our product.
• Package content :
1 x HUD module
1 x Reflector film
1 x OBD II connection line
1 x Operation manual 1 x Magic tape
•Positive feedback with FIVE STARS on all of the Detailed Seller Ratings are welcome.
•Please do contact us at first time if there are any problems and please don't hurry to leave negative feedback.