Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
I am listing a Gibraltar Intruder II double pedal in good condition. I have had this pedal for about 5 years and used it for a couple of show and decided to switch to single pedal instead. This pedal retails for $439.00 and normally sold for about 265.00 to $275.00 on the internet and at your local music store. This pedal is a quiet,smooth, fast pedal with quick response and is the top of the line pedal of the Gibraltar family and is comparable to the tama iron cobra, dw5000 and pearl eliminator pedals. I will be listing some detailed specifications to this pedal:
Drive shaft- All Steel drive shaft in good condition. u-joints have allways been lubricated with either synthetic grease or synthetic oil. On one end of the drive shaft there was little movement where the yoke of the drive shaft was attached. There was side to side movement and I tack welded the yoke to the drive shaft in two places, so now it does not have any side to side movement. Gibraltar and pearl and some aftermarket companies are the only ones to make a hardened all steel drive shaft. everybody else like dw, axis are all aluminum. which wears out much faster.
beaters- original beaters got misplaced and lost and I ended up buying 2 tama adjustable iron cobra beaters w/ adjustable weights. The heads of the beaters are adjustable and in very good condition.
footboards w/ hinges- in good condition . The footboards have little side to side movement, but this is normal for gibraltar footboard hinges. Footboards show no signs of wear, or cracks.
Bottom steel plate- 12 gauge all steel powdercoated plates. This plate has a stamped reinforced beam in the center to prevent the plate from bending and making it more ridgid. Plates also have velcro still on the bottom so they can attach themselves to commercial carpet and prevent pedals from moving or running on you while your playing.
pedal spring assembly- all in very good condition. with no signs of wear.
spring cam assembly- in good condition with no signs of wear. Spring cam assemble is adjustable so you can have different beater degrees. the cam also has a all bearing S-hook where the spring attaches too. This is one nice feature that this pedal has compared to other pedals that have either a brass bushing or plastic bushing.
Chain cam assembly- In good condition with no signs of breakage or wear. This cam assembly has something that no other manufacture has . An adjustble footboard height. You can adjust the footboard height without moving the degree angle of the beater giving you more throwback or less throwback as you step on the pedal.
Hoop Clamp- This is a side adjustable toe clamp .The hoop clamp can be adjusted to different hoop thicknesses. The right pedal has a side hoop clamp assembly as well as the left pedal.
Pedal frame- All in good condition with now signs of cracks or beakage, just small nicks and scratches.
Sorry pedal does not have a case.
You can also make this double pedal into two single pedals by transferring the spring cam assembly and bushing and special ordering a beater holder and placing it over on the left pedal .
If you have any questions about shipping or about this pedal just leave me a message.
Shipping rates will vary upon your location
I ship outside the USA.