Perfect Condition(Hardly Used) - Includes Rack Mounting Plate
20 Amp (2400 Watt) rating
PLEASE NOTE: This unit has a 20 Amp power plug and requires a 15/20A power outlet
Multiple levels of protection components can safely absorb large spikes and provide highly effective RF filtering — the most comprehensive protection available anywhere!
Extreme Voltage Shutdown guards against destructive wiring faults
Critical functions are monitored by a “smart” microprocessor; LED status indicators report on problems
Precision magnetic circuit breakers (PL-PRO, PM-PRO only)
Heavy duty 10 foot, 12 gauge line cord
Eight widely-spaced, switched rear outlets and one unswitched front outlet
The PRO Series are Furman’s top-of-the-line power conditioners. They provide the most complete and comprehensive protection from power line-related transient voltages, noise, and wiring faults available. Their many special features were designed specifically to provide maximum protection from the type of hazards faced by delicate digital pro audio and video equipment.
Power line disturbances are real, and they are inevitable. According to Consumer Reports (November, 1994), “One significant surge a day is the norm. High-exposure areas may experience perhaps a hundred smallish spikes a day.” Proper protection is essential for costly equipment, even more so if it is frequently moved from location to location. But there is a wide range of differences in the performance available from the protection products available.
What sets the PRO Series apart from other conditioners is the quantity, quality, and configuration of the suppression devices used. These include MOV’s, gas discharge tubes, fast-blow fuses, and high voltage inductors and capacitors. This unique combination can safely absorb and dissipate large spikes from nearby lightning strikes and other sources (up to 11,000 amps across any wiring mode — line-neutral, line-ground, or neutral-ground), as well as highly attenuate audible high frequency noise. Precise high-inrush magnetic circuit breakers avoid the false tripping often encountered with large reactive loads like power amps.
An additional feature, Extreme Voltage Shutdown, fights a hazard particularly common in the entertainment industry: wiring faults — for example, accidental connection to 220V. It senses voltages that are so high or low that operation would be impossible (under 80V or over 140V) and shuts the power down before damage can occur. LED status indicators (“Protection OK” and “Ground OK”) monitor the integrity of the protection devices and grounding, and report if the protection is compromised.
The PM-PRO Power Conditioner/Monitor is for applications where lights are not needed. It features the same AC voltmeter as the PL-PRO, and adds a true RMS-reading AC ammeter, which will give a reliable indication of current draw even for highly nonlinear loads like amplifiers and switching power supplies.
All PRO Series rackmount models come with a ten foot, 12 AWG power cord, and have eight widely-spaced rear outlets that can accommodate bulky plug-mounted power supplies, as well as a front-panel unswitched outlet.
The Power Conditioners shall mount in a standard 19" rack, and shall occupy one rack unit (13/4") of rack space.
There shall be at least eight switched outlets supplying conditioned power on the rear panel and one unswitched outlet on the front panel, with a front panel-mounted 20 amp, high-inrush magnetic circuit breaker rated for use as a master switch. No outlet shall receive power if the mains voltage is “extreme” (defined as under 80V or over 140V). Spikes shall be clamped to no more than 200 V peak in any mode (line to
PL-PRO and PM-PRO are similar except the terminal strip is not present.
Current rating: 20 Amps (2400 Watts at 120 VAC)
Input Voltage: 85 to 264 VAC
Meter Accuracy: Voltmeter: ±2 VAC; Ammeter: ±2 amps,
Calibrated with trimpot adjustments Spike Protection Modes: Line to neutral, neutral to ground, line to ground Spike Clamping Voltage: TVSS rating 400V peak, L-N, N-G, L-G (tested
to UL 1449)
Response time: 1 nanosecond
Maximum surge current: 11,000 amps (8 x 20mS pulse)
Maximum spike energy: 550 joules total Noise attenuation: Differential mode: Greater than 40 dB; Common
mode: greater than 60 dB; both 1 to 200 MHz Mechanical:
Dimensions: 1.75" H x 19" W x 10" D. Weight: 6 lbs (2.7 kg).
Construction: Steel chassis, zinc chromate plating; .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards.
Power Consumption: PM-PRO, PS-PRO: 6 watts PL-PRO: 20 watts LISTED 7Z37
Safety Agency Approvals: UL, C-UL, listed.
The Furman PRO-Series is manufactured in the United States of America