THIS SIMPLE BUT EFFECTIVE HOSEL BORE SANDER ,DESIGNED BY EX AEROSPACE ENGINEER,BEN POMPA,WILL REMOVE EPOXY,CORROSION,BURRS AND EVEN MOISTURE SUCH AS WATER OR OILS FROM WITHIN CLUBHEAD HOSELS.THE MANDREL END FITS INTO ANY MOTOR CHUCK WHILE THE FLAP END FITS INTO ANY CLUBHEAD BORE.THE RESULT IS A SQUEEKY CLEAN BORE READY FOR SHAFT INSTALLATION.HAND HOSEL CLEANERS CAN'T DO THE JOB.YOU NEED THE MOTOR RPM'S AND CONSEQUENT FRICTION HEAT TO INSURE COMPLETE MOISTURE REMOVAL.THE ECONOMY HOSEL FLAP SANDER WILL ABSORB MOISTURE WHILE WIRE BRUSHES CANNOT.
THE ECONOMY HOSEL FLAP SANDER KIT CONSISTS OF ONE SLOTTED STEEL MANDREL INTO WHICH THE SANDING STRIP SLIDES ,AND 10 QUALITY SANDING STRIPS OF 100 GRIT.
NO NEED TO WORRY ABOUT REFILLS.THE ECONOMY HOSEL FLAP SANDER IS SIMPLIFIED SO YOU CAN MAKE YOUR OWN REPLACEMENT FLAP SANDER STRIPS USING JUST A PAPER STAPLER AND A 1 1/2 IN. BY 1 1/4 IN. PIECE OF SANDPAPER OR SANDING CLOTH.
Cart
Back to home page
) 