DAKE TECHNICS 350-A 14" AUTOMATIC PIVOTING COLD SAW
INVENTORY # 3258
MODEL: TECHNICS 350 A
MACHINE TYPE: PNEUMATIC POWERED AUTOMATIC PIVOT HEAD
MAXIMUM BLADE SIZE: 14" WITH 32 MM ARBOR (2/8/45MM DRIVE PIN SPACING)
MINIMUM BLADE SIZE: 12" WITH 32 MM ARBOR (2/8/45MM DRIVE PIN SPACING)
SPINDLE SPEEDS: 3 SPEED
MIN/MAX SPINDLE: 22 RPM / 44 RPM / 88 RPM
HEAD FEED: AIR OVER OIL POWER FEED
MAXIMUM VISE: OPENING 6-5/8"
MITER CUTTING CAPABILITIES: 60° LEFT / 45° RIGHT
CONTROLS CE CERTIFIED 24-VOLT - WITH FOOT START SWITCH
HORSEPOWER: 3.5 HP
MAXIMUM SINGLE STROKE: 23-1/2"
MINIMUM STROKE: 1/4 "
MULTIPLE STROKE: CAPACITY 9 X
PIECE COUNTER CAPACITY: 999999 PIECES
FEED VISE: PNEUMATIC WITH OUT OF STOCK SHUT-OFF
LENGTH ADJUSTMENT: HAND WHEEL ADJUSTABLE WITH SCALE
MICRO LENGTH ADJUSTMENT: VERNIER ADJUSTMENT
WEIGHT: 1,190 POUNDS
WORK HEIGHT: 36-3/4"
OVERALL HEIGHT: 60"
OVERALL LENGTH (LENGTH CYLINDER FULLY EXTENDED) 90-1/2"
LUBRICANT: FLOOD TYPE UNIT BUILT INTO THE MACHINE (ELECTRICAL)
VOLTAGE: AVAILABLE 230-VOLT 3-PHASE
AVAILABLE 460-VOLT 3-PHASE (EXTERNAL TRANSFORMER)
MACHINE SHOULD BE WIRED TO MAIN SERVICE BY A QUALIFIED ELECTRICIAN.
AMP: 20-AMP SERVICE FOR 230-VOLTS MACHINES
16-AMP SERVICE FOR 460-VOLT MACHINES
COMPRESSED AIR: 90 PSI CLEAN DRY AIR
OPERATING TEMPERATURE: NO SPECIAL OPERATING TEMPERATURE LEVEL
DEGREE / ROUND / SQUARE / FLAT
90°: 4-3/4", 4-1/8", 6-1/4" x 3-1/2"
45° LEFT: 4", 3-3/8" 3-3/8" x 2-3/4"
45° RIGHT: 4", 3-3/8", 3-3/8" x 2-3/4"
HEAVY-DUTY MEDIUM PRODUCTION 3 SPEED SAW, COMES WITH (1) STANDARD HSS BLADE.
SEMI AUTOMATIC MODE FOR HANDS FREE CUTTING, AND AUTOMATIC MODE FOR UNATTENDED CUTTING.
HYDRAULICALLY VARIABLE HEAD FEED CONTROL FOR REGULATION OF HEAD FEEDING RATE.
AIR OVER OIL HEAD FEED CYLINDER IS DESIGNED IN A PUSH / PULL CONFIGURATION, GIVING THE SMOOTHEST HEAD PIVOT ACTION POSSIBLE.
WIDE HEAVY PIVOT POINT WITH ECCENTRIC FOR SQUARING OF HEAD, IF EVER NECESSARY.
HEAD PARAMETERS ALLOW FOR MINIMUM DEAD AIR CUTTING, AND ELIMINATE THE NEED FOR SOMETIMES-UNRELIABLE RAPID ADVANCE.
HEAD PARAMETERS ARE SET USING (2) GUIDED LIMIT SWITCH CAMS.
CAPABLE OF NEAR MILLED FINISH CUTS WITH PROPER BLADE.
HEAVY-DUTY GEARBOX FOR LONG DEPENDABLE LIFE.
TAPER ROLLER AND BALL BEARING FOR SPINDLE SHAFT AND MOTOR SHAFT SUPPORT.
ALL STEEL AND BRONZE GEARS. NO PLASTIC GEARS TO BREAK.
INTERNAL CLUTCH TO PREVENT OVER FEEDING THAT CAN CAUSE BLADE DAMAGE.
THE CLUTCH IS ADJUSTABLE TO GIVE YOUR MACHINE MANY YEARS OF PRECISION CUTTING.
CE CERTIFIED ELECTRONICS. LOW VOLTAGE CONTROLS, WITH THERMO OVER LOAD PROTECTION.
LOW VOLTAGE PROTECTION WITH EMERGENCY STOP BUTTON.
ELECTRICAL PANEL CONVENIENTLY LOCATED, AND CONTROLS TO RAISE / LOWER HEAD FROM THE PANEL FOR POSITIVE SETTING OF HEAD PARAMETERS.
FOOT START SWITCH FOR REMOTE HANDS FREE STARTING OF THE CUTTING CYCLE.
MITERS UP TO 45° RIGHT, 60° LEFT.
PNEUMATIC OPERATED VISE CLAMPS AUTOMATICALLY IN SEMI AUTOMATIC OR AUTOMATIC MODE.
MITERING SET UP IS FAST AND PRECISE WITH SCRIBED SCALE FOR ALL ANGLES ON HEAD PIVOT. THE HEAD TURNS-THE MATERIAL DOES NOT. .
VISE FACES ARE HARDENED AND SERRATED STEEL, FOR SURE CLAMPING AND LONG LIFE.
VISE JAW CAN BE ADJUSTED CLOSE TO WORK FOR MAXIMUM HOLDING POWER.
VISE IS GIB ADJUSTABLE, FOR TRUING UP THE CLAMPING AT ANY TIME IT MAY BE REQUIRED.
AIR FEED CYLINDER IS DESIGNED IN A PUSH / PULL CONFIGURATION THAT TRAVELS ON HARDENED RAILS GIVING THE SMOOTHEST MATERIAL FEED ACTION.
THE FEED VISE HAS OUT OF STOCK LIMITS THAT WILL AUTOMATICALLY STOP THE MACHINE WHEN THE MATERIAL HAS BEEN EXHAUSTED.
INDICATOR LIGHT WILL ILLUMINATE TO WARN YOU OF THE OUT OF STOCK CONDITION.
MATERIAL IS CLAMPED BY THE FEED VISE OR THE MAIN VISE AND IS NEVER LEFT LOOSE.
BECAUSE THE MATERIAL IS ALWAYS CLAMPED BY ONE OF THE VISES, THIS PREVENTS MOVEMENT AND PROVIDES GOOD TOLERANCES.
FOR ADJUSTING THE FEED LENGTH, THE MAIN CYLINDER IS POSITIONED WITH A HAND WHEEL AND READING FROM A SCALE.
FOR FINE ADJUSTMENT OF THE LENGTH, A VERNIER IS INCORPORATED INTO THE SYSTEM FOR THE FINEST ADJUSTMENT.
ELECTRICAL ENCLOSURE HOUSES THE CYCLE SWITCHES, WARNING LIGHTS, PIECE COUNTER WITH A 999999 PIECE COUNTING CAPACITY THAT STOPS THE MACHINE WHEN YOUR PRESET NUMBER OF PARTS HAVE BEEN CUT.
ALSO INSTALLED IN THIS MODULAR PANEL IS THE MULTIPLE STROKE COUNTER, FOR SETTING THE FEED VISE TO MULTIPLE STROKE LONGER LENGTHS UP TO 9 TIMES.
VERTICAL ROLLER HOLDS THE MATERIAL FLAT AND PREVENTS TIPPING OR DROPPING OF THE MATERIAL AS THE MATERIAL LENGTH DECREASES.
VARIABLE FEEDER SPEED ADJUSTMENT REGULATORS ALLOWS FOR INCREASING OR DECREASING THE FEEDER SPEED RATE TO TAILOR THE MACHINE TO YOUR APPLICATIONS.
FEEDER GUARD COMPLETELY COVERS THE MOVING COMPONENTS OF THE FEED SYSTEM WITH SAFETY INTERLOCK. BLADE GUARD COMPLETELY COVERS THE BLADE.
STEEL FABRICATED BASE FOR STURDY OPERATION.
TOOL KIT FOR QUICK BLADE CHANGES AND ONE GALLON OF COOLANT
COMPLETE CE APPROVED ENGLISH OWNERS MANUAL, AND BLADE PITCH CALCULATOR.
***BLADE STARTER PACK: (3) HSS 14 BLADES (120, 180, AND 280 TOOTH)
***78 LOADING TABLE: IN-BOUND WITH PROTECTIVE COVER PLATES
***78 UNLOADING TABLE: OUT-BOUND WITH SCALE AND ADJUSTABLE POSITIVE STOP
***VICE PRESSURE REGULATOR KIT (COVERS MAIN VICE AND FEEDER VICE)
PRICE: $ 16,995.00
TAKE A LOOK AT OUR OTHER SAWS HERE!
CONTACTING NORMAN MACHINE TOOL, LTD:
For immediate response to questions, please contact us at
1-800-394-4399 during business hours.
(Weekdays, 9am - 5pm EST)
If you contact us by email, or after business hours, we will answer your questions as soon as possible.
NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS:
Norman Machine Tool, Inc strives to keep listings current for our customers.
Manufacturer's specifications and availability are subject to change without notice.
Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale.
1311 South Ponca Street - Baltimore, Maryland 21224. Phone 800-394-4399 - Fax 410-633-7737.
RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER
Use a Phase-A-Matic Static or Rotary Phase Converter. Buy the best & buy Phase-A-Matic. Phase-A-Matic phase converters are proven to last for 20 to 30 years. You can run multiple three phase motors from just one phase converter, allowing you to run multiple three phase motors off single phase power! View Phase-A-Matic in our Phase Converter aisle of our eBay store!
The information and pictures are believed to be accurate to the best of our knowledge, obtained from sources deemed reliable. However, we do not guarantee accuracy of information and cannot be responsible for any errors or omissions. An inspection should be made. The information on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Please contact one of our sales representatives if you require more information or a current formal quotation.
NORMAN MACHINE TOOL, LTD. CONDITIONS OF SALE:
INSPECTION AND TEST EQUIPMENT
Inspection & Test Equipment will be sold "AS IS" with a conditional return policy on a case by case basis. Please ask questions!
The equipment's condition stated in the listing is accurate to the best of our knowledge. We do not specialize in these products and have no way of checking them beyond visual and some minor mechanical functions. We assume most of this equipment must be calibrated professionally. We feel the low prices we offer more than makes the equipment a great value!
MDNA 30 DAY WARRANTY
Every used machine offered (unless sold on an "as is" basis or brokered) bears a thirty day return privilege. In the event it is found mechanically unsatisfactory (excludes electrical*, as well as original manufacturers accuracies and tolerances), it may be returned within thirty (30) days of shipment, freight prepaid, provided it is in the same condition as when shipped from Norman Machine Tool, Ltd., for full refund of purchase price or repaired at the seller's sole discretion. All new machines that have been manufactured by others that have warranties, expressed or implied, are hereby expressly limited to the warranty of the original manufacturer of the goods. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. Seller makes no representation or warranty that said goods conform to any specification, description and condition or performance, it is the buyer's responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyer's requirements. Any warranty concerning said goods made by a third party is enforceable only against the third party and not the seller. Conforms to the mdna code of ethics. 30 Day MDNA Warranty applies to items sold at the advertised price.This warranty does not apply to Best Offers without prior agreement, or items sold As-Is.
Norman Machine Tool Ltd. gladly accepts PayPal, Visa, Master Card, American Express and Discover. We can run your credit card at our warehouse, or if your prefer, even without an account, you can sign into PayPal as a guest and use your credit card. Local pickups at our warehouse in Baltimore, MD are required to pay 6% Maryland state taxes to abide by Maryland state laws.
All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING!!! Buyer must pay for return shipping.
All shipping originates from 21224 zip code. We ship as soon as possible after receipt of payment. Large items that must be shipped via truck will ship as soon as the truck can be secured, usually within 10 business days. Special preparation, such as crating, will delay shipment and will be available at additional cost. We can secure your equipment on a pallet, starting at $50 and varying based on the equipment size, weight, and materials needed. The buyer pays for all shipping. All items need to be paid for within 72 hours of auction end.
Go Back to Our Store Homepage
1311 South Ponca Street - Baltimore, Maryland 21224. Phone 800-394-4399 - Fax 410-633-7737.