Custom Race T3T4 T3 T4 TurboCharger Turbo Boost Kit

(1) Hybrid Turbo Charger:

• .57 compressor wheel trim mapped for low & high boost setups
• Oil fitting gaskets & mounting studs included
• Capable of producing over 450 horsepower
• Wet float bearings & properly balanced
• 3" inlet diameter with a 2" outlet
• .50 A/R compressor housing
• .63 A/R turbine housing
• 1/8 NPT oil inlet
• T3/T4 hybrid

• Large design cools down the turbocharged air efficiently
• Strong TIG welds will support high PSI levels
• Lightweight aluminum racing intercooler
• Extra thick core provides ample cooling
• 2.5" cold outlet & 2.5" hot inlet
• Less then 2% pressure drop

• Protects turbo by venting when shifting and/or reducing throttle
• Performance design produces a powerful & aggressive sound
• Quality design will not leak under high boost conditions
• Flanges installed at user discretion
• Includes complete install kit

• Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
• Slim design provides excellent engine bay clearance
• Includes the mounting tabs for a easy zip tie install
• Reversible design can either pull or push air
• Versatility of a push/pull reversible fan
• Superior flow of a curved-blade design
• Creates additional aftermarket cooling
• 1.25" thick outside perimeter
• 2.50" thick inside perimeter

• Great to setup fuel pressure for boosted engines
• Includes complete install kit
• Precision pressure gauge
• Fully adjustable

• Stops excess oil from blowing to the intake manifold
• Ensures better mileage & better performance
• Removes oil vapors from breather line
• Show like high quality polish
• Includes complete install kit

• Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
• Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
• Control additional engine bay heat and prevent overheating.
• Keep intercooled air cooled.
• Made of very high temp fiberglass.

• Stainless braiding makes rubber radiator hoses up to 5x stronger
• Makes engine bay look of show car quality
• Strong construction provides years of reliability
• Anodized ends for the authentic race like finish

• Lightweight yet strong aluminum piping
• May necessitate light modification to fit
• (8) stainless steel worm gear clamps
• (1) 2.5” 90 degree silicone couplers
• (3) 2.5” straight silicone couplers
• (1) 90 degree 2.5” bends
• (1) 60 degree 2.5” bends
• (1) 45 degree 2.5” bends
• (1) straight 2.5” pipes

• Water jet cut for precision flow
• Mild steel for easy welding to an adapter pipe or direct to stock manifold

• Increases airflow into the turbo system
• Replaces the filter for track performance
• Acts as a Ram Air
• Ultra lightweight and strong aluminum

• 5" sized 
• White face, back lit 
• 11k RPM max
• Programmable shift light for perfect shifts

• White face, back lit
• 0-100psi range
• Mounting hardware and wiring included.

• White face, back lit
• Small, lightweight design for an easy install anywhere
• Mounting hardware and wiring included.

• White face, back lit
• Small, lightweight design for an easy install anywhere
• Mounting hardware and wiring included.

• White face, back lit
• 30in/hg vacuum, 30psi boost pressure
• Mounting hardware and wiring included.

• White Face, back lit
• 8v to 16v range
• Mounting hardware and wiring included.

• Mounts on dash or center console
• Angles 2 gauges perfectly to the driver
• Lightweight plastic, hollow backing for gauge wire tucking
• Textured finish, for an OEM look.