|
|
Crown XLS 5000
2 Channel Amplifier
|
Package Contents:
|
(1) Crown XLS 5000 Amplifier
(1) AC Power Cable
[110v, 20 AMP US Plug]
(1) User Manual
|
Crown XLS 5000 Features:
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 3U chassis on the XLS5000
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
| Crown XLS 5000 Specifications: |
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25
|
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) |
+0 dB, –1 dB
|
| Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) |
A-weighted, below rated power: > 100 dB
No weighting, below rated power: > 95 dB
|
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz |
< 0.5%
|
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB |
< 0.3%
|
| Damping Factor (8 ohm): 10 Hz to 400 Hz |
> 200
|
| Crosstalk (below rated power) |
at 1 kHz: –75 dB
at 20 kHz: –50 dB
|
| Input Impedance (nominal) (balanced,unbalanced) |
20 kilohms, 10 kilohms
|
| Load impedance |
Stereo: 4-8 ohms
Bridge mono: 8 ohms
|
| AC Line Voltage and Frequency Configurations Available (± 10%) |
120 VAC 60 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Internal heat sinks with forced-air cooling
|
| Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3)
|
| Dimensions: Width, Height, Depth |
XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
|
| Net Weight, Shipping Weight |
XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)
|
| Minimum Guaranteed Power per channel, both channels driven |
| 1 kHz with 0.5% THD |
Stereo, 2 ohms (per ch.): 2,500W**
Stereo, 4 ohms (per ch.): 1,800W*
Stereo, 8 ohms (per ch.): 1,100W*
Bridge-Mono, 8 ohms: 3,600W*
Bridge-Mono, 4 ohms: 5,000W**
|
*with 0.1% THD
**with 1% THD
|
Warranty Information
| Product: |
Period: |
| Crown XLS 5000 |
3 Year |
|
) 
Back to home page
