• Daily Deals
  • Sell
  • Customer Support

Bidding has ended on this item. The seller has relisted this item or one like this.

Ships to:
United States, Canada, Mexico
Visit store:
Geometric Robotics
Ships to:
United States, Canada, Mexico

Details about  CNC Router Kits Engraver Cutter Mill Machine Travel 24"x24" Milling

See original listing
CNC Router Kits Engraver Cutter Mill Machine Travel 24"x24" Milling
Item Ended
Item condition:
Sep 23, 2012 18:57:09 PDT
Starting bid:
US $1,695.00
0 bids ]
$175.00 Standard Shipping | See details
Item location:
Wheelersburg, Ohio, United States


eBay item number:
Seller assumes all responsibility for this listing.

Item specifics

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition

Geometric Robotics

Sign up for newsletter Sign up for newsletter
Visit Store:   Geometric Robotics


Industrial model, Ball Screws on all axis and over 100 inches per min travel.

This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis. This unit is ridged we only use grade 8 bolts; its 16mm Ball Screws have bearings and a nut on both ends to relieve stress on the motors and hold the precision. From our experience most don't realize how they work. In CNC's if the steppers are not matched with the controller the stepper or controller or both will run hot. And a stepper that is over rated for a controller will have less torque than one matched for a controller. Our controllers and steppers on all our units are now matched. They will run and only be warm to the touch. But they are running at full torque. The unit here in the video is running rapids in excess of 100 inches per min. The T-slot, along the sides, have nuts inserted, and are used to screw a piece of 3/4" sub-floor onto: (such as AdvanTech). After installing the sub-floor board, a piece of sacrificial mdf board can be screwed onto it. Since you will make a mistake once in awhile, this is what I recommend doing, and I have been doing this for many years. With using the mdf board, you can put screws and clamps anywhere to hold the pieces down, and when you need to cut around a piece, you can put a screw through the piece to hold it. With a T-slot top, you can only put clamps where the slots are, and when you need to cut the piece out, it really becomes a hassle. I'm pricing this unit as a kit, which means the X&Y will not be assembled. The Z will be assembled for you, and simple tools will be needed to put the X&Y together. You'll want to take your time putting it together, and to make the pieces fit, you may need to file or sand them. Generally, most people can put this CNC together in an evening. We have included everything in this kit to get you up and running. A CNC is an excellent tool for many hobbyists, which can turn their creations into a part time or full time job. Like I said, I have been doing CNC work for years; we've built a lot of machines for individuals as well as commercial users. This machine is capable of making one just like it, or even a larger one. Because we think that the average handyman will be able to assemble this unit, we decided to price a kit unit to cut down the cost. Also, in doing this, it saves us time on assembling a complete unit, and it cuts out approximately ten 2X4's for proper packing of a completed unit; which also saves our customers on shipping costs. We have been selling CNC products for several years, and all of our customers have been completely satisfied, and we guarantee, at this price, you will not find a unit of this size and quality on the market! And, we're always here to answer any of your questions! We reserve the right's to make change for improvements.

X&Y&Z 20mm rods and bearings
X = 24 inch
Y = 24
Z = 4 ¼ inch
X, Y and Z 16mm Lead 5mm Ball Screws Accuracy .001
3 = Nema 23 270 oz stepper motors
3 = precision motor couplers
1 =  4 axis's controller 3.5 amp
1 = 24v, 14amp power supply
1 = db25 cable
1 = Bosch Colt router mount or Standard round Spindle mount


Click to Play Video of our 2x4 CNC

This is what you get if you order the kit. The CNC will have the X&Y not put together so it can be shipped with out crating charges to save money. You will only need simple tools to put the X&Y together. The Z will be put together. You want to take your time putting it together. You may need to file or sand to make pieces fit. You can usually put the CNC together in and evening. It will ship with one Bosch Colt router mount. If you are not mechanical inclined and can't use a drill, file or sand paper please buy the assembled model.

CNC knock down X&Y, 3 270 oz steppers, Control Board, 24v,14 amp Power supply, 3 couplings for motors, 25' stepper wire and a DB25 cable. Kits are none returnable. I recommend Mach3. You will find what ever software you use you will usually end up with Mach3. We can supply you with the xml file.

Questions and answers about this item

No questions or answers have been posted about this item.


Place bid

Time left:
Current bid:
(Approximately ##1##)
Import charges:
Your max bid:
Your max bid:
By clicking Confirm bid, you commit to buy this item from the seller if you are the winning bidder.
By clicking Confirm bid, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Shipping Program terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.
Resume bidding, if the page does not update immediately.
Place bid
Review and confirm your bid
Bid confirmation
FREE shipping
See item description
(Approximately ##1##)
(Enter ##1## or more)
(Enter more than ##1##)
Your max bid:
Increase max bid
Place bid
Confirm bid
Increase max bid
Change bid
, you've been outbid. Don't let it get away - bid again!
, you're the highest bidder on this item. Hope you win it!
, you're the first bidder. Hope you win!
, you're currently the high bidder, but you're close to getting outbid.
, this auction is almost over and you're currently the high bidder.
, you're the high bidder, but the reserve price hasn't been met.
Please enter your bid again.
Please enter a valid number as the bid price.
Enter an amount that is equal or greater than the minimum bid required. This can be found under the bid entry box.
Maximum bids can't be lowered once they're submitted.
This seller requires the buyer to have a PayPal account to purchase this item. Get a PayPal account here .
Your bid is greater than or equal to the Buy It Now price. We recommend you purchase this item via Buy It Now. If you still wish to bid, you may do so below.
Time left:
Current bid:
(approximately ##1##)
Your maximum bid:
(approximately ##1##)
Increase your maximum bid:
By clicking 1 Click Bid, you commit to buy this item from the seller if you're the winning bidder. Learn moreabout 1-click bid - opens in a new window or tab
(approximately ##1##)
Winning bid:
Starting bid:
Congrats! The auction has ended and you're the winner.
The auction has ended, but the reserve price was not met.
Sorry, the auction has ended and you were outbid.
Good news, you're the high bidder.
Sorry, you've been outbid.
You're the high bidder, but the reserve price is not met.
Please enter a higher amount than the current bid.
Maximum bids cannot be lowered once submitted.
Please enter a valid number.