Details about Biljax 2622T Towable manliftBiljax 2622T Towable manlift See original listing
Dec 09, 2011 11:01:36 PST
[ 22 bids ]
Boise, ID, United States
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
26'1'' - 27'
This is my lift that has been used 99% by me alone. I am changing careers and selling out some equipment. As all my equipment is, this is well maintained and ready for work. There is a latch broken and a foot pad that can fall off occasionally. These two items are relatively insignificant to me and the operation of the machine is 100%. Here is a link to the specs from biljax.
The 2622T is the 5th addition to the Summit Series™ line of trailer mounted boom lifts. The 2622T provides 32.5' of working height and 22' of outreach and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously.
Working height 32 ft 6 in (10.1 m)
Maximum platform height 26 ft 6 in (8.1 m)
(from centerline) 22 ft (6.7 m)
(from edge of footpad) 17 ft 1 1/2 in (5.2 m)
Up and over height N/A
Turntable rotation 700º non-continuous
Load capacity 440 lb (200 kg)
• Simple telescopic boom design
• Zero tail swing
Let me know what you need to know and I will provide. I am willing to do what you need to get it shipped through a carrier at your cost. I will also drive the machine if you want to pay me a reasonable amount. i like a trip to portland or Seattle occasionally. I had it brought to me on a flatbed and used a forkift to unload. It has forklift holes on top for transporting.
This machine is special because it is small enough to be pulled by an ATV. I have the one used to pull it for sale if interested. A minivan can pull this machine around town.
Call James at 208-484-6365 or send an email. I am not an ebayer so when items are missing in the listing it is only because you have not asked. I do not know what you require due to my inexperience. I will need $1000 within 48 hour of auction to hold it for final payment. This or I have to offer second chance offers or relist. I accept paypal and appreciate cash. Thanks
On Dec-05-11 at 07:16:16 PST, seller added the following information:
Questions were asked and these are some answers.
The Boom travels nice on the highway and is rated for 65MPH and I am quite sure that higher speeds have been successfully traveled with positive results.
The Fenders are banged up some and the batteries have not been replaced but maintained in an obsessive manner and operate fine currently. Never had a problem when I charge them. There is an onboard charger that monitors and maintains voltage. Replacement batteries when necessary will cost about 400-500 dollars. The fenders are about 50 each and the latch is aobut 15. All this make the machine new again.
I will put on a few more photos later today.
Once again the machine is ready to work and if considering a manlift for a carshow, this may not be the best option.
On Dec-05-11 at 18:04:28 PST, seller added the following information:
The trailer has surge brakes which means there is no electronic or hydraulic connection to the pull vehicle. The brakes activate when pressure is applied at the tongue of the trailer.
This manlift is strictly powered by battery. the batteries seem to be as good as new.
One other defect is the azimuth stop that is broken. According to the techs a tthe factory this is common. To fix a problem to repair again later makes no sense. I track the movement and dont go past the 360 degrees. When in doubt you can simply look at the hoses to see if they are twisted. This is better than relying on the stop that may or may not work.