Details about Ashly XR1001 Stereo 2-Way Mono 3-Way Rack Crossover Perfect Condition!See original listing
Jun 25, 2012 15:54:30 PDT
Maricopa, AZ, United States
This listing is for an Ashly XR1001 Stereo 2-way Mono 3-way electronic crossover.
Single rack space, it is in perfect, like new condition. Shows NO wear and functions perfectly.
Even comes with mesh wire guard that fits over the front (in your rack) so that your setting don't get adjusted by mistake once they are set; kind of cool feature!
Excellent, easy to use crossover of high quality. These are $269 new online price: Don't miss out on a great deal and get this one in new condition and save $100 bill!
Please email me with any questions.
Buyer pays fixed $15 shipping/insurance in the US (lower 48 only)
Input Level: Full-off to +8dB
XR1001, XR2001: 400Hz-8kHz (40Hz-800Hz*)
XR4001: 400Hz-8kHz (40Hz-800Hz*) (L-LM, LM-HM)
1.2kHz-24kHz (120Hz-2.4kHz*) (HM-H)
* using divide by 10 range switch
Range Switch: divides crossover freq. by 10
Response: -1.5dB to -12dB at xrossover point
Output Level: Full-off to +15dB
20k Ohms, balanced bridging
200 Ohms, servo-balanced (terminate with >600 Ohms)
MAX INPUT LEVEL
MAX OUTPUT LEVEL
TOTAL HARMONIC DISTORTION
HUM AND NOISE
100-240VAC, 50-60Hz, 24W
XR1001: 19"W x 1.75"H x 8"D
XR2001: 19"W x 3.5"H x 8"D
XR4001: 19"W x 3.5"H x 8"D
XR1001: 8 lbs
The unit shall be a stereo two-way, switchable to mono 3-way, 24dB per octave electronic crossover in a one rack space metal chassis. The unit shall have separate front panel input level controls on both channels for interfacing with broad range of nominal system levels. Unity gain operation must be achievable by setting these controls at the “U” position.
Each of the units two channels shall have independent, infinitely variable adjustment of crossover frequency with controls located on the front panel. This control shall provide a total range of 200:1 when used in conjunction with the unit.s adjacent recessed RANGE switch. There shall be a RESPONSE control calibrated in decibels on each channel to adjust the damping of that filter at the crossover point, thus allowing variable system response adjustment to specific site requirements. The unit shall have separate clip indicators to monitor all internal amplifiers for any possible overload conditions.
Each channel of the crossover unit shall have a separate output level control and mute switch located on the front panel. The crossover shall be the Ashly model XR-1001. There shall be separate inputs and outputs for each channel on 1/4. TRS phone jacks and XLR connectors, any of which may be used balanced or unbalanced. There shall be a 1/4" TRS connector providing for a summed mono low output. which can be used balanced or unbalanced.