|
Tips
This pocket oscilloscope is
primarily used for
applications in the
following situations:
1. Repair common
electronic equipment
outside (Air conditioning or
Industrial frequency
inverter power supply, AC /
DC switching power supply or
inverter, elevator and
building fire safety
equipment, industrial
control circuit)
2. Hardware maintenance
or software debugging RS232,
RS485, I2C, CAN and other
communications interface
circuits, LED display and
keyboard scan driver
circuit, brushless motor
drive circuit
3. Audio equipment and
circuits, electronic toys
and remote control models,
car repair electronic
circuits
4. School after-school
teaching practice and
student development of
electronic small production
5. Need to slow signal
changes observed
applications (such as: relay
and switch contacts jitter,
battery charge and discharge
curves of the load transient
response power supply,
temperature sensor features
measurement)
6. The related supply t
electronic circuit (SCR
voltage regulator, power
factor correction,
electronic energy saving
lamps, dysprosium lamp
mercury lamp sodium lamp
xenon lights drive circuit),
As for other issues such as:
CPU clock, RAM access, bus
and USB or Ethernet signal
measurement, high frequency
and the video circuitry and
the need to use FFT for
signal analysis and so on
occasion, The oscilloscope
valued less than $1000 are
not necessarily qualified
for these. We advice to buy
high-end oscilloscope!
Deserves special mention is
this pocket-sized internal
battery-powered oscilloscope
can be used, so in the field
measurement, Ground is
completely suspended, can be
completely the same as
multimeters, which measure
what point, do not consider
the issue of ground
isolation.
☺ARM
Digital Oscilloscope
(Build-in Battery)☺
Important Note about the
ePacket Delivery to US
Buyer
Due to ePacket Delivery
refuse to ship with Battery,
if you buy this item, we'll
remove Battery out, and then
ship Battery via Singapore
Post Airmail to you
separately, You may receive
the Battery later than DSO
Quad, when you get DSO
Quad in advance, you can use
USB Connect Power to use it,
Thanks for your
understanding & supports.
Shipping about this item to
US:
1. DSO Quad (without
Battery) with
other Accessory: ePacket
Delivery to US (7-15
working days).
2. Battery: Singapore Post
International Flat Shipping
to US (10-20
working days).
DOWNLOAD
Manual
DSO203 is a pocket
size 4 channel
digital oscilloscope
for common
electronic
engineering tasks.
It's based on ARM
cortex M3
(STM32VCT6),
providing 72MS/s
sampling rate with
integrated FPGA and
high speed ADC.
Internal 2MB USB
disk could be used
to store waveform,
user application and
upgrade firmware.
Feature
1) 2 probe connectors
2) 4 inputs & 4 tracks (2
analog 2 digital)
3) A custom waveform output
(including the built-in
sine, square, triangle)
4) Built-in 2M USB disk
5) Very low power
consumption
Specification
|
Analog
channel
* 2 |
[CH_A] [CH_B] |
|
Digital
channel
* 2 |
[CH_C] [CH_D] |
|
Vertical
Scale |
20mV-10V/div
(1-2-5
step) on
x1 probe
/ 200mV
-100V/div
(1-2-5
step) on
probe |
|
Vertical
resolution |
8 bit |
|
Input
coupling |
AC/DC |
|
Max
input
voltage |
80Vpp
(x1
probe) /
400Vpp
(x10
probe) |
|
Storage |
4K per
channel
/ 8K on
single
channel |
|
Software
trigger
type |
edge,
pulse,
level
(to be
added) |
|
Hardware
trigger
type |
edge |
|
Trigger
source |
CH1/CH2/EXT |
|
Trigger
mode |
Auto,
Normal,
Single,
SCAN,
None |
|
Test
Signal
generater |
10Hz to
8Mhz
2.8Vpp
Square
Wave,
duty
circle
10~90%
adjustable
/ 10Hz
to 20Khz
2.8Vpp
Sin,
Square,
Saw,
Triangle
wave |
|
Storage |
internal
2MB USB
disk,
BMP, DAT
file |
|
Auto
measure |
Vmax,
Vmin,
Vpp,
Vavr,
Vrms,
Freq,
Period,
Pulse,
Duty |
|
Cursor
measurement |
Level,
Voltage |
|
Display
mode |
CH1,
CH2,
EXT,
CH1+CH2,
CH1-CH2,
CH1*CH2 |
|
Sampling
mode |
real
time |
|
Sampling
rate |
30S/s -
72MS/s |
|
Power |
Lipo
battery |
|
Dimension |
98 * 60
* 14.5
(mm) |
|
Weight |
80g
(without
battery) |
|
Accessories
within
Pack |
2 mcx
osilloscope
probe |
Cautions
The warnings and
wrong operations
possible cause
dangerous.
Description
►3" 240 × 400 widescreen
color TFT LCD screen, STM32
is the master MCU, with the
FPGA to implement the
control and management of
external ADC and data cache.
►At the same time to reduce
the size and easy to DIY
manual welding, MCU and the
FPGA are selected QFP100
package, ADC selected QFP48
package.
►36M+36M sampling frequency,
the use of the ADC AD9288-40
chip, single-channel maximum
sampling frequency of the
72M.
►FIFO RAM has a maximum
operating frequency of use
of> 200MHz low-power FPGA to
achieve.
►The AD9288-40 Overclocking
to achieve 72M+72M sampling
frequency, so that the
maximum single-channel
sampling rate up to 144M.
►Analog channel circuit
using unity gain> 150MHz op
amp, so the actual 30MHz
analog bandwidth is expected
to do more.
►As low power, low-cost, QFP
package and other conditions
of the FPGA, storage
capacity is not large, so
DSO203 sampling depth of the
current situation for the
multi-channel 4096 points
per channel, single-channel
work cases, 8192 points.
Frequently Asked
Questions
Q: If
this is a beta run,
will the device be
firmware upgradeable
(via USB) when and
if bugs are found?
A: Sure,
just copy the
firmware onto
internal USB disk,
press ">" while
booting up to
upgrade.
Q: What
are the user
applications?
A: [No
official answer] As
far as I know, there
will be the
possibility to boot
up different
applications that
you can store on the
U-Disk. I'll add a
section to this page
collecting ideas for
user applications.
Q: What
is the battery
life?
A: It's
1000mAH, 3.7V
More & more
Questions & Answer
are adding……
Packing List
- ARM Digital
Oscilloscope (DSO203)
(Including Battery) x1
- Probe x2
- Mini USB Cable x1
We'll supply Flannel
Bag for this
DSO Oscilloscope
freely.
Note: There is another "Mueller
MCX Digital Hook Clips" is
not including in the
package if you need it,
please click the
following image to buy
it together.

|