When purchacing the hp 462535-001 motherboard, consider adding a new graghics chip thermal pad and cpu chip thermal paste. berore installing the thermal fan unit over the cpu and gpu chips, clean any oxide from the fan unit heat sinks at the points of contact with a rubber eraser and blow out all dust from the fan unit. Use new ceramic based paste on both sides of the "graghics chip thermal pad" so the pad makes good contact at both the heat sink and graghics chip. I don't recommend a copper shim type thermal over the graghics chip on this motherboard, because the spring tension on the fan unit mount screws put too much pressure on the graghics chip and can tilt the fan unit up off the cpu socket area. Next, put new ceramic thermal paste on both of the cpu chip and the fan unit heat sink area that will be in contact with the cpu. No thermal pad will be used on the cpu chip, just the paste. Install the fan unit by tightening the mount screws in a sequence starting at the cpu socket to insure a good flat surface installation at the cpu socket.Read full review
sorry but the board well not power up every thing has been look at even new CPU chip and all caution has been made handling the board.
Verified purchase: Yes | Condition: New
Works great, very good value.
Verified purchase: Yes | Condition: Pre-owned
This is one of many replacement motherboard that is still available for an HP DV2000 series laptop computers. This motherboard is a very easy replacement for an ailing laptop and should take no longer than one hour or less to get up and running. I recommend that you get a new motherboard or as an alternate a refurbished one from a reputable dealer.
good Product
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Motherboards
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Motherboards