Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Water Heater Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Water Heater Parts
This set is well made with quality parts, but - the sweat coupling engineered for the source and output attachments requires that the installer heat the the valves body up hot enough to sweat "silver" solder between the valve body and the connecting copper pipes. Silver solder requires a lot of heat, and this causes the two different valve seals in each valve body to suffer. After mine were installed both of the "flush" valves leaked. I applied Teflon paste to the closed surfaces - and work them back and forth some, and the leaking seems to have stopped. I think the oupput connections should be threaded to accept normal water heater hookup flex lines.
Verified purchase: Yes | Condition: New
Priced right. BUT you have to sweat these on. I have used some that are threaded which is much easier than sweating them on. Other wise a good product.
Verified purchase: Yes | Condition: New
The connection points are 3/4" as listed within the description. That being said, I thought that meant the internal pass through would be 3/4" it is not. The valve is 1/2" immediately reducing the water flow by 25%. Not as described.
Verified purchase: Yes | Condition: New
It seams to be of good quality and was delivered before date quoted.
Verified purchase: Yes | Condition: New
Quality castings. Less than half the price of the same at box stores with no PR valve. Need to purchase 4 fittings to adapt size for use with Eccotemp odhwh.
Verified purchase: Yes | Condition: New