Check out my
ML706840 6" LED Recessed Light Energy Saving LED module 14W Comparable to 65W
Incandescent/Halogen or 18W Compact Fluorescent 4000K Color Temp
the light output and distribution of a 65W BR30 incandescent lamp or an 18W
compact fluorescent luminaire (lamp and reflector trim), while consuming less
than 14 watts.
The HALO LED 600 Series luminaire is dimmable to 15% with standard 120V
electronic low voltage dimmers (recommended), incandescent or magnetic low
voltage dimmers; and dims to 5% using dimmers with low end trim adjustment.
Standard incandescent dimmers require a minimum load of typically >40 watts on
the circuit for full range dimming performance (four LED modules). For dimming
with digital (smart) multi-location dimmers or when dimming fewer than four LED
modules, electronic low voltage dimmers are required (ELV dimmers need a neutral
connection in the wallbox). Quality of Light Halo 600 Series provides excellent
color rendering (80 CRI), and a selection of four color temperatures (2700K,
3000K, 3500K and 4000K). CRI and color temperature performance conform to
parameters established by ENERGY STAR® SSL standards (refer to ANSI-C78.377 -
2008 for CCT specifications). LED’s have virtually no ultraviolet and minimal
infrared wavelengths, and they do not emit heat like conventional lamps.
Optical Design and Life Rating
Optical design yields productive beam lumens, 50° cutoff, and low glare. Rated
for 50,000 hours at 70% lumen maintenance.
The Halo ML7068xx LED modules are designed for use in the dedicated H750x series
housings OR for retrofit applications in existing Halo or ALL-PRO™ H7/ET7/EI7
housings. The Halo LED module is designed for use in either IC (insulated
ceiling) or non-IC construction.
Compatible HALO and ALL-PRO housings include model numbers:
• Dedicated LED Housing: H750x Series
• Halo Housings: H7x Series
• ALL-PRO Housings: ET7x and EI7x Series
Screw Base Adapter, Module Construction, Air-Tite™ Rating, LED Driver
Edison screw-base adapter supplied with module allows simple wiring connection
to existing housing. Durable die-cast and extruded aluminum construction
conducts heat away from the LED keeping the junction temperatures below
specified maximums even when installed in insulated ceiling environments. The
Halo LED module has passed restricted air flow testing, and now qualifies any
housing to meet airtight building codes. Certified under ASTM-E283 standards.
The LED module is controlled by a high efficiency driver with a power factor of
>.90 at an input power of 120V, 50/60Hz. Driver has integral thermal protection
in the event of over temperature or internal failure.
• UL/cUL Listed Can be used to meet the following requirements:
• State of California Title 24-2008 High Efficacy Compliant (with designated
• International Energy Conserva tion Code (IECC) 2009 High Efficacy Compliant
(with designated trims)
• Washington State Energy Code - AIR-TITE™
• New York State Energy Conservation Construction Code AIR-TITE™
LED Module 600 Series Spec Sheet -
LED Module 600 Series Instruction Sheet -
Available in 2700K, 3000K, 3500K,
4000K color temp, 14W, 15W, 25W. Please click on LED module picture below.
We carry all the matching
Bulbs for this Module.
E-Mail me your desired Cans & Trims & Bulbs.
Free Shipping on the
Bulb when ordered with this Module. E-mail me for details.
This item will
ship 24 - 72 hours after receiving payment.