For Sale is a 2005/2006 5.4L 4V Aluminum Long Block
I am condsidering this item as a Long Block, but I will include a lot more items such as, Carbon Fiber Valve Covers, wire harness, most of the pulleys, alternator, Dry Sump Pump, Accufab 75mm Throttle Body, Ford GT Two Piece Intake manifold (I don't have the intercooler), Everything you see in the pictures and more... This is nearly a complete motor. 5.4 Aluminum Block. Starter is machined for application in Non-GT applications.
Original equipment for the 2005 Ford GT supercar
356-T6 aluminum casting with cast iron sleeves
Enhanced bulkhead and main webbing strength compared to production 4.6L aluminum block
Machined for piston oil squirters
Weight: 110lbs Saves 100lbs vs cast Iron block
COMPLETE FORD GT SUPERCAR 4V heads - Ported & Polished
The Baddest head ever available from Ford, factory equipment on Ford GT super car. These heads are fully assembled with high lift springs, Stainless Intake Valves and Inconel Exhaust valves, cams, lifters and rockers.
New Kellogg Crankshaft
Forged 8 bolt 5.4 Crankshaft, Cryo treated, polished, and race prepped
New Manley Pistons & Rods (Ceramic Coated Tops) Brand Manley
Manufacturer's Part Number 594100-8
Part Type Pistons
Product Line Manley Platinum Series Pistons
Summit Racing Part Number MAN-594100-8 Bore (in) 3.552 in.
Bore (mm) 90.221mm
Piston Style Dish, with no valve reliefs
Piston Material Forged aluminum
Compression Distance (in) 1.220 in.
Piston Head Volume (cc) +11.00cc
Wrist Pin Style Press-fit or floating
Pin Diameter (in) 0.866 in.
Piston Ring Thickness 1.50mm x 1.50mm x 3.00mm Brand Manley
Manufacturer's Part Number 14040R-8
Part Type Connecting Rods
Product Line Manley Steel H-Beam Connecting Rods
Summit Racing Part Number MAN-14040R-8 Connecting Rod Length Center to Center (in) 6.657 in.
Connecting Rod Beam Style H-beam
Connecting Rod Material Forged 4340 steel
Connecting Rod Finish Shot-peened
Wrist Pin Style Floating
Clearanced for Stroker No
Cap Retention Style Cap screw
Connecting Rod Bolt Brand ARP
Connecting Rod Bolt Diameter 7/16 in.
Connecting Rod Bolt Material ARP 2000 alloy
Fastener Yield Strength (psi) 220,000 psi
Connecting Rod Bolt Head Style 12-point
Approximate Connecting Rod Weight (g) 625
Big End Bore Diameter (in) 2.2390 in.
Pin End Bore Diameter 0.867 in.
Big End Width (in) 0.940 in.
Advertised Horsepower Rating (hp) 850 hp
Advertised RPM Rating 8,500 rpm
Weight Matched Set Yes