This is an ultra-high intensity, high-performance Integrated LED Tail Light for the 2008, 2009, 2010, 2011 & 2012 Honda CBR-1000RR with built in non-sequential yellow turn signals (want sequential signals?). This product is a high quality complete plug and play unit with a clear lens and OEM connectors (want smoked lens?). This product directly replaces the OEM tail light without any modification necessary. The lens quality is equivalent to the OEM unit it replaces.
The Custom LED 2008, 2009, 2010, 2011 & 2012 Honda CBR-1000RR Integrated LED Tail Light features black "stealth" electronics and rear lens assembly for a smoked look, without any loss of performance! The lens is optically clear, yet has a smoked appearance compared to standard integrated LED tail lights. This allows for visual appeal of a smoked tail light lens, without sacrificing any performance or safety that smoked tail lights certainly lose.
The Custom LED 2008, 2009, 2010, 2011 & 2012 Honda CBR-1000RR Integrated LED Tail Light now features the latest version of our proprietary and patented Blaster-X technology with Brake Alert and Strobe Mode! With this product, your turn signals are built right into the tail light! It's the best fender eliminator money can buy.
Brake Alert automatically provides three quick ultra-bright strobe pulses of light the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!
Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time.
Blaster-X is our proprietary pulse-width-modulation (PWM) technology that squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.
NEW! This product also marks the introduction of our NEW Programming Interface which allows users to easily customize features of the tail light! The customizable features menu allows users to:
- Enable or Disable the Startup Sequence.
- Set the number of pulses in the Brake Alert feature (can set to zero to disable Brake Alert).
- Adjust the running light brightness within a preset range
- Adjust the brake light brightness within a preset range
- Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!
- Reset factory defaults
This programming interface is accessed very simply through the Strobe Mode control wire! The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire. No special equipment is necessary to access and utilize the programming interface! Detailed programming instructions will ship with every unit.
NEW! And last but not least, our Sure-Blink Technology. Our Integrated Tail Lights are designed to follow the turn signal commands of the motorcycles flasher relay. This insures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our Custom LED ELFR-P Flasher Relay. However, in the event that the tail light receives a command to blink that does not break (blink) within a preset time period, the tail light will automatically blink that side. This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs. Also, in keeping with this effort, we have also built in our ever popular Stage I Load Equalizers into this tail light!
This high performance Integrated tail light utilizes 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 24 red LEDs on the stock circuit board! These LEDs effectively handle the functions of: Running Light (red), Brake Light (red) and Turn Signals (amber) - all within the tail light housing!
Just as on the other Custom LED Integrated LED Tail Light models, the system is designed so that the red LEDs turn off (on the turn side) when the yellow LEDs come on, so that the turn indication is a pure and distinguishable yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.
The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.
Plug-and-Play installation with OEM connectors (tail light AND turn signals).
OEM Fit with high quality clear lens (want smoked lens?).
32 Ultra Bright Red LEDs for running and brake lights.
32 Ultra Bright Yellow LEDs for turn signals.
Stealth black boards for inconspicuous appearance.
Custom LED ColorChange Technology on-board.
Custom LED Blaster-X PWM technology on-board.
Custom LED Strobe Mode!
Custom LED Brake Alert!
New Programming Interface allows users to easily customize features!
New Sure-Blink Technology
Built-in Stage I Load Equalizers!
Robust regulated design for consistent and reliable performance.
4 MHz microprocessor controlled operation.
24/7 customer support.
2-year Warranty & Satisfaction Guarantee!
MADE IN THE USA!
NOT DOT approved.
IMAGES (See Pictures of unit for sale: Picture 1, Picture 1.)
The Custom LED 2008, 2009, 2010, 2011 & 2012 Honda CBR-1000RR
Blaster-X Integrated LED Tail Light Plug-And-Play Complete Unit was designed
to function as a direct replacement for the OEM tail light. The unit will
install with exactly the same fit and electrical connectors as the OEM unit. No
cutting, splicing or modifications what so ever.
There may be additional
accessories required to correct blinker problems on your motorcycle if you
remove your OEM turn signals. These accessories can not be built into the tail
light, and are generally optional and specific to different customers needs, so
they are sold separately. Please see the recommended accessories on our company website, and read
about the general issues and solutions in our Frequent Questions Page.
If you have any questions, please do not hesitate to contact us.
Installation of this product requires that you
remove the OEM tail light from the motorcycle, and install this unit in its
place. Please consult a qualified technician or your repair manual for the
proper procedure to remove the OEM tail light.
Once the OEM tail light is removed from the
motorcycle, installation of the Custom LED 2008, 2009, 2010, 2011 & 2012
Honda CBR-1000RR Blaster-X Integrated LED Tail Light is detailed in the
click icon to download
Adobe Acrobat Reader is required to view this
If you are
having problems viewing the file, please download the free software here.
The Custom LED 2008, 2009, 2010, 2011 & 2012 Honda CBR-1000RR Blaster-X Integrated LED Tail Light Plug-And-Play complete unit comes with a FULL 2-Year Manufacturers Warranty against manufacturing defects! We will repair or replace any defects during this period. Even out of the warranty period, we can service this product because WE make it! This is the most reliable integrated LED tail light available, and is Made in the USA! We hand build each unit here at Custom LED. (note: warranty requires customer to send in the tail light for servicing. There are no in-service replacements offered with this warranty. Customer pays for shipping of product to Custom LED. We will cover the return shipping and any/all repair costs).
Honestly, this warranty is more of a piece of mind for our buyers than anything. We do not have failures with these units! They are designed properly, using the highest quality components and processes possible. Purchase with confidence.
We offer phone and E-Mail based customer support for all of our customers and even non-customers actually. Our entire business is handled through E-Mail and is handled very effectively. Our Engineers read every single email and answer them articulately. Typically, during normal business hours, E-Mails are answered within one hour. We can help you solve any problems you may encounter with the installation of this product, or any other product on your motorcycle!
- 2008 HONDA CBR-1000RR
- 2009 HONDA CBR-1000RR
- 2010 HONDA CBR-1000RR
- 2011 HONDA CBR-1000RR
- 2012 HONDA CBR-1000RR