The item you selected is unavailable, but we found something similar.

Picture 1 of 2

Stock photo

Centrifugal 1/2 HP Electric Water Pump Pool Farm Pond 500GPH Fresh Water 375hp - Picture 1 of 2

Centrifugal 1/2 HP Electric Water Pump Pool Farm Pond 500GPH Fresh Water 375hp - Picture 2 of 2

AJ Tools CHIG019 1/2 HP Centrifugal Pump - Blue (6 Pack)

4.45267 product ratings

EconoSuperStore (228146)
97.8% positive feedback

Price:

$49.99

Free shipping

Estimated delivery Mon, Apr 29 - Wed, May 1

Returns:

30 days returns. Buyer pays for return shipping.

Condition:

New

CENTRIFUGAL 1/2 HP ELECTRIC WATER PUMP POOL FARM POND 500GPH. This High Quality Water Pump Provides Constant Power With It's Long Running Motor. Perfect For Farm, pools, Small Ponds And Other Industrial Applications.

About this product

Product Information

Pump clean water or fluids with this Centrifugal 1/2 inch HP Electric Water Pump, which is suitable for domestic use such as drawing water from wells and pools, boosting pressure and garden sprinkling. It has a rated collage of 110v/60Hz, rated power of 370 watts, and a maximum flow 30 CBM/ per hour. It has a continuous run time of 2 hours and takes 10 minutes to cool. Weighing 8.7 pounds, its power source is electric.

Product Identifiers

Brand
AJ Tools
MPN
CHIG019
UPC
0794685141669
Model
CHIG019
eBay Product ID (ePID)
1000019365

Product Key Features

Maximum Head Lift
131.2 ft
Voltage
110 v
Type
Pump
Power
1 1/2 hp

Dimensions

Item Weight
3.2 lb

All listings for this product

item 1 Centrifugal 1/2 HP Electric Water Pump Pool Farm Pond 500GPH Fresh Water 375hp
$49.99
Free shipping
item 2 Water Pump 1/2HP Electric Clear Transfer Centrifugal Bio Diesel Pond Pool Farm
$52.99
Free shipping
item 3 NEW 1/2HP Electric Industrial Centrifugal Clear Clean Water Pump Pool Pond 375W
$54.98
Free shipping

4.5

4.5 out of 5 stars based on 267 product ratings

267 product ratings

189 users rated this 5 out of 5 stars
40 users rated this 4 out of 5 stars
20 users rated this 3 out of 5 stars
5 users rated this 2 out of 5 stars
13 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 166 reviews

4 out of 5 stars
by edgewoodcncMay 25, 2017
Top favorable review
Excellant centrifical pump for price but needs modification.
The Chinese copied a pump like this made in Europe. It has the same missing drill hole they had. The inlet needs a 3/4" hole drilled through the iron casting in the centerline of the rotor and then close ( seal off ) the original inlet hole. Take the pump apart by removing three screws and you will see what I mean. Do this and you will get at least four times more flow. Very easily done in a drill press. Also add a 3amp or 4amp fuse so if something should clog and stop the motor, it will not be burned out I use this pump for the drain on my washing machine, with this mod. Very successful.
Verified purchase: Yes | Condition: New
3 out of 5 stars
by darylsworkshopSep 02, 2020
Top critical review
It does work. But install and operate according to instructions.
I mounted mine to a wall and so it made some noise. Noise, to me, means bearings chattering. A gentle "hum" means electrical processes at work. There is a difference, but I heard both. Never the less, this pump did work okay for a fair length of time. As far as I know it is still working. But for the price it could fail after a couple of years and still be a good buy (I only ran it a few hours per day). Like most centrifugal pumps it does need priming or some liquid head to get it going initially. Aside from the bearing noise (which never actually failed on mine, just a tad noisey) the heat was a concern. The case does get a tad warm/hot after a while. That indicates to me that energy is being wasted (i.e. it is not efficient); but I never tried instruments to measure that. So it is what it is. Just follow the directions and/or be sensible about using one. Beware to check horsepower, head pressures, pipe diameters, flow rates, etc. as many of these similar looking pumps are minorly different.Read full review
Verified purchase: Yes | Condition: New
4 out of 5 stars
by heterodox54Apr 17, 2018
Cheap but effective
I bought this pump to use to fill a small fish pond from a nearby creek rather than filling it with tap water. I figured I would more than save the cost of the pump by not using and having to pay for city water! The pump as received would not run when plugged in. I took the cover off the pump and found that the brass impeller had been pressed too far onto the motor shaft and was binding against the back of the pump housing. I was able to loosen the impeller by holding onto it and rapping the exposed end of the shaft a couple of times with a rubber mallet. After that 'adjustment' the pump ran fine. The pond is roughly 130' from the creek and about 30' higher in elevation. I situated the pump on the creek bank about 4' above the water level and used a 10' length of 1" pvc pipe to dip down into the creek. I happened to have a 1.5" brass foot valve that was suitable for use on the end of the pipe with a pvc adapter. I also used a tee with a cap on one side in the pvc pipe to facilitate priming the pump. From the pump, I ran approximately 130' of 3/4" poly pipe up to the pond. Initially the pump wouldn't hold its prime. I discovered that I hadn't sealed the threaded pvc fitting well enough where it entered the pump causing it to suck air. A bit more teflon tape solved the problem. Once pumping I timed the flow into a 5 gallon pail and measured 66 seconds for a flow rate of just about 4.5 gpm. It took about four hours to fill the pond for an estimated volume of 1100 gallons. The motor ran warm but not excessively hot. Ambient temperature was around 50F. I noticed after taking everything apart that there was a pretty narrow space between the end of the pvc fitting threaded into the pump intake and the internal cast iron of the pump. This may have restricted the flow rate of the pump. I cut about 1/4" off the end of the fitting and will check to see if that improves the flow rate the next time I have an opportunity to use the pump. After disconnecting the pump and draining it as much as possible, I've noticed that the bit of remaining water turned rusty pretty quickly. I've plugged the pump in for a second or two a couple of times over two days and it doesn't appear to be seizing up (yet?) Overall I'm pleased with the performance of the pump and the price was certainly right.Read full review
Product Reviews Images
Verified purchase: Yes | Condition: New
1 out of 5 stars
by capins6lemOct 05, 2020
Cheap Chinese junk. Avoid at all cost.. run do not walk away
Pros.. it's pretty cheap.. cons. The threads to connections are so out of spec you will need 25 wraps of thread tap to stop them from leaking... I used this pump 3 times for about 5 min each time.. the 4th time I went to use it and it was seized up... went to plug it in and the electric motor just hums and the impeller does not spin.. does not pump water at all...! It's all rusty inside.. think about that.. a water pump that rusts..after 3 uses..! Total junk.. if you don't mind buying a pump that will work a few short times then go ahead and go for it.. but if you need a pump that will work when you need it to then look some where else.. Chinese made junk.!
Verified purchase: Yes | Condition: New
4 out of 5 stars
by us_el19Aug 04, 2016
Good Pump
I bought this pump to clean my above ground pool. It is NOT the right pump for my purpose. The pump works well when used for it's designed purpose. I need a submersible pump or a trash pump that is self priming. I didn't think it through before buying but the pump flows well if you can keep a head column of water feeding it.
Verified purchase: Yes | Condition: New

Best Selling in Pumps

See all

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Pumps

Milwaukee 2579-20 M12 Cordless Stick Transfer Pump
5.0 out of 5 stars based on 4 product ratings
$179.00 New
---- Used
VEVOR Water Transfer Pump 120V AC 360 GPH 1/10 HP Portable Electric Utility
5.0 out of 5 stars based on 3 product ratings
$47.98 New
---- Used
VEVOR 4SSM5/6 1HP Well Pump 207ft Submersible Pump 37GPM Stainless Steel 230V
4.0 out of 5 stars based on 2 product ratings
$108.99 New
---- Used
VEVOR Q1CZ-800C 1/2 HP Cast Iron Water Transfer Pump - ZTB12HP1600GP77OK
3.0 out of 5 stars based on 1 product rating
$75.98 New
---- Used
Grundfos UPS 26-99 FC Circulator Pump with Flow Check (52722512)
4.8 out of 5 stars based on 94 product ratings
$239.99 New
$179.99 Used
Predator 2 in Gasoline Engine Semi Trash Water Pump
5.0 out of 5 stars based on 1 product rating
$156.88 New
---- Used
iMountek 12V Water Pressure Booster Pump - T3446
4.8 out of 5 stars based on 4 product ratings
$19.48 New
---- Used

Save on Pumps

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Pumps

Milwaukee M18 Transfer Pump (Tool Only) 2771-20 Brand New
$190.00
Trending at $199.75
Milwaukee Tool 2579-20 M12 Stick Transfer Pump
$179.98
Trending at $199.00
VEVOR 3HP 4” Deep Well Pump 640ft Submersible Pump 37GPM w/Control Box 230V
$175.99
Trending at $206.06
WATER WORKER AMTROL H2O HT-20B 20 GALLON PRE CHARGED PUMP WELL PRESSURE TANK
$184.95
Trending at $210.80
Little Giant 554405 65 GPH Condensate Pump with Safety Switch, White, VCMA-15ULS
$42.95
Trending at $49.99
New Ryobi P750 / 18-Volt ONE+ Hybrid Transfer Pump - Up To 325 Gallons per hour
$73.15
Trending at $94.44

Picture 1 of 2

AJ Tools CHIG019 1/2 HP Centrifugal Pump - Blue (6 Pack)

About this product

Product Information

Product Identifiers

Product Key Features

Dimensions

All listings for this product

Ratings and Reviews

Most relevant reviews

Excellant centrifical pump for price but needs modification.

It does work. But install and operate according to instructions.

Cheap but effective

Cheap Chinese junk. Avoid at all cost.. run do not walk away

Good Pump

Best Selling in Pumps

Save on Pumps

You may also like